LEDE OpenWrt on ZyXEL

admin
Site Admin
Posts: 473
Joined: 06 Feb 2007, 13:36

LEDE OpenWrt on ZyXEL

Post by admin »

The first release of LEDE OpenWrt, r1811, does run nicely on my TEST - ZyXEL P-2812HNU-F1 device -although no http-server, Wireless @ primairly setup yet-.

Code: Select all

BusyBox v1.25.0 () built-in shell (ash)

     _________
    /        /\      _    ___ ___  ___
   /  LE    /  \    | |  | __|   \| __|
  /    DE  /    \   | |__| _|| |) | _|
 /________/  LE  \  |____|___|___/|___|                      lede-project.org
 \        \   DE /
  \    LE  \    /  -----------------------------------------------------------
   \  DE    \  /    Reboot (HEAD, r1811)
    \________\/    -----------------------------------------------------------
Command: uname -a
Returns: Linux OpenWrt-DG03 4.4.23 #0 Thu Oct 6 20:58:50 2016 mips GNU/Linux

A dmesg log:

Code: Select all

root@OpenWrt-DG03:~# dmesg
[    0.000000] Linux version 4.4.23 (buildbot@builds) (gcc version 5.4.0 (LEDE GCC 5.4.0 r1809) ) #0 Thu Oct 6 20:58:50 2016
[    0.000000] SoC: xRX200 rev 1.1
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019555 (MIPS 34Kc)
[    0.000000] MIPS: machine is P2812HNUF1 - ZyXEL P-2812HNU-F1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 805144b0, node_mem_map 8100a3a0
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00064480
[    0.000000] Readback ErrCtl register=00064480
[    0.000000] Memory: 123104K/131072K available (3905K kernel code, 166K rwdata, 1252K rodata, 1188K init, 212K bss, 7968K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 500MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
[    0.000010] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns
[    0.007853] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[    0.042307] pid_max: default: 32768 minimum: 301
[    0.047135] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.053701] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.067722] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.077529] pinctrl core: initialized pinctrl subsystem
[    0.083954] NET: Registered protocol family 16
[    0.093159] pinctrl-xway 1e100b10.pinmux: Init done
[    0.098641] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
[    0.209005] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[    0.223930] PCI host bridge /fpi@10000000/pci@E105400 ranges:
[    0.229563]  MEM 0x0000000018000000..0x0000000019ffffff
[    0.234819]   IO 0x000000001ae00000..0x000000001affffff
[    0.254437] gpio-stp-xway 1e100bb0.stp: Init done
[    0.259795] usbcore: registered new interface driver usbfs
[    0.265284] usbcore: registered new interface driver hub
[    0.270642] usbcore: registered new device driver usb
[    0.276149] PCI host bridge to bus 0000:00
[    0.280141] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
[    0.287050] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
[    0.293992] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.300847] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.308893] pci 0000:00:0e.0: [1814:3062] type 00 class 0x028000
[    0.308948] pci 0000:00:0e.0: reg 0x10: [mem 0xffff0000-0xffffffff]
[    0.309323] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.309369] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
[    0.317182] clocksource: Switched to clocksource MIPS
[    0.323748] NET: Registered protocol family 2
[    0.329009] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.335904] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.342282] TCP: Hash tables configured (established 1024 bind 1024)
[    0.348784] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.354636] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.361282] NET: Registered protocol family 1
[    0.365609] PCI: CLS 0 bytes, default 32
[    0.372278] gptu: totally 6 16-bit timers/counters
[    0.377102] gptu: misc_register on minor 63
[    0.381212] gptu: succeeded to request irq 126
[    0.385700] gptu: succeeded to request irq 127
[    0.390213] gptu: succeeded to request irq 128
[    0.394726] gptu: succeeded to request irq 129
[    0.399240] gptu: succeeded to request irq 130
[    0.403754] gptu: succeeded to request irq 131
[    0.408622] ralink,eeprom ralink_eep: using RT3062.eeprom as eeprom
[    0.415008] phy-xrx200 gphy-xrx200: requesting lantiq/vr9_phy11g_a1x.bin
[    0.422257] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 7D80000
[    0.428591] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 7D80000
[    0.536069] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.542165] Crashlog allocated RAM at address 0x3f00000
[    0.567916] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.573666] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.587495] io scheduler noop registered
[    0.591310] io scheduler deadline registered (default)
[    0.597282] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[    0.606156] console [ttyLTQ0] enabled
[    0.613506] bootconsole [early0] disabled
[    0.624925] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[    0.629818] nand: Samsung NAND 128MiB 3,3V 8-bit
[    0.634432] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.642077] Scanning device for bad blocks
[    0.726202] Bad eraseblock 973 at 0x0000079a0000
[    0.733529] 4 ofpart partitions found on MTD device 10000000.nand-parts
[    0.738709] Creating 4 MTD partitions on "10000000.nand-parts":
[    0.744626] 0x000000000000-0x000000040000 : "uboot"
[    0.751283] 0x000000040000-0x000000060000 : "uboot-env"
[    0.757152] 0x000000060000-0x000000260000 : "kernel"
[    0.762816] 0x000000260000-0x000008000000 : "ubi"
[    0.871640] libphy: lantiq,xrx200-mdio: probed
[    0.945916] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:00, irq=-1)
[    1.013888] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:01, irq=-1)
[    1.081873] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:11, irq=-1)
[    1.149872] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:13, irq=-1)
[    1.217889] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:05, irq=-1)
[    1.226092] ltq-cputemp cputemp@0: Current CPU die temperature: 0 °C
[    1.231362] wdt 1f8803f0.watchdog: Init done
[    1.239612] NET: Registered protocol family 10
[    1.249895] NET: Registered protocol family 17
[    1.252970] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.265574] 8021q: 802.1Q VLAN Support v1.8
[    1.274586] UBI: auto-attach mtd3
[    1.276270] ubi0: attaching mtd3
[    1.460600] ubi0: scanning is finished
[    1.474738] ubi0: attached mtd3 (name "ubi", size 125 MiB)
[    1.478819] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[    1.485662] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    1.492362] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
[    1.499152] ubi0: good PEBs: 1004, bad PEBs: 1, corrupted PEBs: 0
[    1.505245] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.512472] ubi0: max/mean erase counter: 13/7, WL threshold: 4096, image sequence number: 1504047231
[    1.521697] ubi0: available PEBs: 0, total reserved PEBs: 1004, PEBs reserved for bad PEB handling: 19
[    1.531063] ubi0: background thread "ubi_bgt0d" started, PID 321
[    1.560089] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 323
[    1.647113] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.653120] UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.663006] UBIFS (ubi0:0): FS size: 125153280 bytes (119 MiB, 970 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
[    1.673614] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[    1.679454] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID F4FA102C-12C1-40E4-B773-E8E8F072DB20, small LPT model
[    1.691526] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    1.700396] Freeing unused kernel memory: 1188K (80537000 - 80660000)
[    1.844287] init: Console is alive
[    1.846577] init: - watchdog -
[    2.069913] dwc2 1e101000.ifxhcd: requested GPIO 489
[    2.073528] dwc2 1e101000.ifxhcd: Configuration mismatch. Forcing host mode
[    2.937392] dwc2 1e101000.ifxhcd: DWC OTG Controller
[    2.940959] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
[    2.948312] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
[    2.953822] dwc2 1e101000.ifxhcd: Hardware does not support descriptor DMA mode -
[    2.961265] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
[    2.968879] hub 1-0:1.0: USB hub found
[    2.971684] hub 1-0:1.0: 1 port detected
[    2.975754] dwc2 1e106000.ifxhcd: Configuration mismatch. Forcing host mode
[    3.837384] dwc2 1e106000.ifxhcd: DWC OTG Controller
[    3.840974] dwc2 1e106000.ifxhcd: new USB bus registered, assigned bus number 2
[    3.848281] dwc2 1e106000.ifxhcd: irq 91, io mem 0x00000000
[    3.853813] dwc2 1e106000.ifxhcd: Hardware does not support descriptor DMA mode -
[    3.861259] dwc2 1e106000.ifxhcd: falling back to buffer DMA mode.
[    3.868718] hub 2-0:1.0: USB hub found
[    3.871688] hub 2-0:1.0: 1 port detected
[    3.878828] init: - preinit -
[    4.096087] random: procd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
[    4.253222] usb 2-1: new high-speed USB device number 2 using dwc2
[    5.013328] eth0: port 1 got link
[    7.244187] mount_root: mounting /dev/root
[    7.344307] urandom-seed: Seed file not found (/etc/urandom.seed)
[    7.395516] procd: - early -
[    7.398271] procd: - watchdog -
[    7.964183] procd: - ubus -
[    8.013218] eth0: port 1 lost link
[    8.019855] random: ubusd: uninitialized urandom read (4 bytes read, 35 bits of entropy available)
[    8.027972] random: ubusd: uninitialized urandom read (4 bytes read, 35 bits of entropy available)
[    8.036480] random: ubusd: uninitialized urandom read (4 bytes read, 35 bits of entropy available)
[    8.046129] random: ubusd: uninitialized urandom read (4 bytes read, 35 bits of entropy available)
[    8.054403] random: ubusd: uninitialized urandom read (4 bytes read, 35 bits of entropy available)
[    8.063635] random: ubusd: uninitialized urandom read (4 bytes read, 35 bits of entropy available)
[    8.072649] random: ubusd: uninitialized urandom read (4 bytes read, 35 bits of entropy available)
[    8.081875] procd: - init -
[    8.349375] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
[    8.369588] NET: Registered protocol family 8
[    8.372500] NET: Registered protocol family 20
[    8.388562] PPP generic driver version 2.4.2
[    8.401582] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    8.467795] Lantiq (VRX) DSL CPE MEI driver, version 1.5.17.6, (c) 2007-2015 Lantiq Beteiligungs-GmbH & Co. KG
[    8.467795] 
[    8.467795] Lantiq CPE API Driver version: DSL CPE API V4.17.18.6
[    8.524490] 
[    8.524490] Predefined debug level: 3
[    8.540619] Loading modules backported from Linux version wt-2016-06-20-0-gbc17424
[    8.546816] Backport generated by backports.git backports-20160216-7-g5735958
[    8.559754] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.574020] Infineon Technologies DEU driver version 2.0.0 
[    8.580075] IFX DEU DES initialized (multiblock).
[    8.584311] IFX DEU AES initialized (multiblock).
[    8.588460] IFX DEU ARC4 initialized (multiblock).
[    8.593093] IFX DEU SHA1 initialized.
[    8.596694] IFX DEU MD5 initialized.
[    8.600315] IFX DEU SHA1_HMAC initialized.
[    8.604354] IFX DEU MD5_HMAC initialized.
[    8.630125] nf_conntrack version 0.5.0 (1942 buckets, 7768 max)
[    8.658025] NET: Registered protocol family 24
[    8.683219] xt_time: kernel timezone is -0000
[    8.973048] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
[    8.977514] rt2800pci 0000:00:0e.0: failed to load eeprom property
[    8.983497] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT3062.eeprom'.
[    8.994283] rt2800pci 0000:00:0e.0: Direct firmware load for RT3062.eeprom failed with error -2
[    9.001950] rt2800pci 0000:00:0e.0: Falling back to user helper
[    9.067046] firmware RT3062.eeprom: firmware_loading_store: map pages failed
[    9.072920] ieee80211 phy0: rt2x00lib_request_eeprom_file: Error - Failed to request EEPROM.
[    9.081247] rt2800pci: probe of 0000:00:0e.0 failed with error -11
[   10.433476] random: jshn: uninitialized urandom read (4 bytes read, 45 bits of entropy available)
[   10.498858] random: jshn: uninitialized urandom read (4 bytes read, 45 bits of entropy available)
[   17.842389] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.851862] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[   18.013413] eth0: port 1 got link
[   18.015308] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   18.041307] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   30.945236] random: nonblocking pool is initialized
Ruler: [ 9.072920] ieee80211 phy0: rt2x00lib_request_eeprom_file: Error - Failed to request EEPROM.
Shows that we need to copy file RT3062.eeprom into /lib/firmware onto the device.

DG.
admin
Site Admin
Posts: 473
Joined: 06 Feb 2007, 13:36

Re: LEDE OpenWrt on ZyXEL

Post by admin »

If we do copy RT3062.eeprom to /lib/firmware and install uhttpd, luci and luci-ssl, followed by a reboot, the OpenWrt config should stay the same and i got nicely internet access!

Image

Serial logs:

Code: Select all

ROM VER: 1.0.5
CFG 06
NAND
NAND Read OK

U-Boot SPL 2013.10-openwrt5 (Nov 18 2014 - 19:54:01)
SPL: initializing NAND flash
SPL: checking U-Boot image
SPL: loading U-Boot to RAM
SPL: decompressing U-Boot with LZO
SPL: jumping to U-Boot


U-Boot 2013.10-openwrt5 (Nov 18 2014 - 19:54:01) P-2812HNU-Fx

Board: ZyXEL P-2812HNU-Fx
SoC:   Lantiq VRX288 v1.1
CPU:   500 MHz
IO:    250 MHz
BUS:   250 MHz
BOOT:  NAND
DRAM:  128 MiB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   ltq-eth
Hit any key to stop autoboot:  0

NAND read: device 0 offset 0x60000, size 0x200000
 2097152 bytes read: OK
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   MIPS LEDE Linux-4.4.23
   Created:      2016-10-06  20:58:50 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1731637 Bytes = 1.7 MiB
   Load Address: 80002000
   Entry Point:  80002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Linux version 4.4.23 (buildbot@builds) (gcc version 5.4.0 (LEDE GCC 5.4.0 r1809) ) #0 Thu Oct 6 20:58:50 2016
[    0.000000] SoC: xRX200 rev 1.1
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019555 (MIPS 34Kc)
[    0.000000] MIPS: machine is P2812HNUF1 - ZyXEL P-2812HNU-F1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00064480
[    0.000000] Readback ErrCtl register=00064480
[    0.000000] Memory: 123104K/131072K available (3905K kernel code, 166K rwdata, 1252K rodata, 1188K init, 212K bss, 7968K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 500MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
[    0.000010] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns
[    0.007853] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[    0.042307] pid_max: default: 32768 minimum: 301
[    0.047135] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.053701] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.067722] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.077529] pinctrl core: initialized pinctrl subsystem
[    0.083954] NET: Registered protocol family 16
[    0.093159] pinctrl-xway 1e100b10.pinmux: Init done
[    0.098641] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
[    0.209006] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[    0.223932] PCI host bridge /fpi@10000000/pci@E105400 ranges:
[    0.229563]  MEM 0x0000000018000000..0x0000000019ffffff
[    0.234818]   IO 0x000000001ae00000..0x000000001affffff
[    0.254433] gpio-stp-xway 1e100bb0.stp: Init done
[    0.259787] usbcore: registered new interface driver usbfs
[    0.265275] usbcore: registered new interface driver hub
[    0.270632] usbcore: registered new device driver usb
[    0.276139] PCI host bridge to bus 0000:00
[    0.280132] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
[    0.287041] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
[    0.293984] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.300838] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.309360] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
[    0.317174] clocksource: Switched to clocksource MIPS
[    0.323739] NET: Registered protocol family 2
[    0.328992] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.335886] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.342264] TCP: Hash tables configured (established 1024 bind 1024)
[    0.348767] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.354618] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.361268] NET: Registered protocol family 1
[    0.372270] gptu: totally 6 16-bit timers/counters
[    0.377102] gptu: misc_register on minor 63
[    0.381211] gptu: succeeded to request irq 126
[    0.385699] gptu: succeeded to request irq 127
[    0.390213] gptu: succeeded to request irq 128
[    0.394726] gptu: succeeded to request irq 129
[    0.399240] gptu: succeeded to request irq 130
[    0.403754] gptu: succeeded to request irq 131
[    0.408623] ralink,eeprom ralink_eep: using RT3062.eeprom as eeprom
[    0.415008] phy-xrx200 gphy-xrx200: requesting lantiq/vr9_phy11g_a1x.bin
[    0.422258] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 7D80000
[    0.428591] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 7D80000
[    0.536069] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.542165] Crashlog allocated RAM at address 0x3f00000
[    0.567908] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.573657] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.587485] io scheduler noop registered
[    0.591302] io scheduler deadline registered (default)
[    0.597274] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[    0.606147] console [ttyLTQ0] enabled
[    0.606147] console [ttyLTQ0] enabled
[    0.613497] bootconsole [early0] disabled
[    0.613497] bootconsole [early0] disabled
[    0.624917] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[    0.629809] nand: Samsung NAND 128MiB 3,3V 8-bit
[    0.634423] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.642069] Scanning device for bad blocks
[    0.726398] Bad eraseblock 973 at 0x0000079a0000
[    0.733738] 4 ofpart partitions found on MTD device 10000000.nand-parts
[    0.738917] Creating 4 MTD partitions on "10000000.nand-parts":
[    0.744835] 0x000000000000-0x000000040000 : "uboot"
[    0.751489] 0x000000040000-0x000000060000 : "uboot-env"
[    0.757430] 0x000000060000-0x000000260000 : "kernel"
[    0.763038] 0x000000260000-0x000008000000 : "ubi"
[    0.871850] libphy: lantiq,xrx200-mdio: probed
[    0.945907] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:00, irq=-1)
[    1.013880] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:01, irq=-1)
[    1.081864] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:11, irq=-1)
[    1.149864] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:13, irq=-1)
[    1.217881] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:05, irq=-1)
[    1.226084] ltq-cputemp cputemp@0: Current CPU die temperature: 0 °C
[    1.231354] wdt 1f8803f0.watchdog: Init done
[    1.239603] NET: Registered protocol family 10
[    1.249895] NET: Registered protocol family 17
[    1.252970] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.265574] 8021q: 802.1Q VLAN Support v1.8
[    1.274581] UBI: auto-attach mtd3
[    1.276261] ubi0: attaching mtd3
[    1.460859] ubi0: scanning is finished
[    1.475002] ubi0: attached mtd3 (name "ubi", size 125 MiB)
[    1.479081] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[    1.485923] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    1.492623] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
[    1.499413] ubi0: good PEBs: 1004, bad PEBs: 1, corrupted PEBs: 0
[    1.505506] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.512733] ubi0: max/mean erase counter: 14/8, WL threshold: 4096, image sequence number: 1504047231
[    1.521958] ubi0: available PEBs: 0, total reserved PEBs: 1004, PEBs reserved for bad PEB handling: 19
[    1.531323] ubi0: background thread "ubi_bgt0d" started, PID[    1.560301] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 323
[    1.636550] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.642564] UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.652447] UBIFS (ubi0:0): FS size: 125153280 bytes (119 MiB, 970 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
[    1.663056] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[    1.668896] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID F4FA102C-12C1-40E4-B773-E8E8F072DB20, small LPT model
[    1.680938] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    1.689838] Freeing unused kernel memory: 1188K (80537000 - 80660000)
[    1.834122] init: Console is alive
[    1.836368] init: - watchdog -
[    2.061727] dwc2 1e101000.ifxhcd: requested GPIO 489
[    2.065340] dwc2 1e101000.ifxhcd: Configuration mismatch. Forcing host mode
[    2.929382] dwc2 1e101000.ifxhcd: DWC OTG Controller
[    2.932950] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
[    2.940302] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
[    2.945817] dwc2 1e101000.ifxhcd: Hardware does not support descriptor DMA mode -
[    2.953257] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
[    2.960884] hub 1-0:1.0: USB hub found
[    2.963657] hub 1-0:1.0: 1 port detected
[    2.967743] dwc2 1e106000.ifxhcd: Configuration mismatch. Forcing host mode
[    3.829386] dwc2 1e106000.ifxhcd: DWC OTG Controller
[    3.832976] dwc2 1e106000.ifxhcd: new USB bus registered, assigned bus number 2
[    3.840283] dwc2 1e106000.ifxhcd: irq 91, io mem 0x00000000
[    3.845814] dwc2 1e106000.ifxhcd: Hardware does not support descriptor DMA mode -
[    3.853260] dwc2 1e106000.ifxhcd: falling back to buffer DMA mode.
[    3.860738] hub 2-0:1.0: USB hub found
[    3.863656] hub 2-0:1.0: 1 port detected
[    3.870826] init: - preinit -
[    4.088459] random: procd: uninitialized urandom read (4 bytes read, 18 bits of entropy available)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    4.245205] usb 2-1: new high-speed USB device number 2 using dwc2
[    5.013318] eth0: port 1 got link
[    7.236424] mount_root: mounting /dev/root
[    7.248022] urandom-seed: Seeding with /etc/urandom.seed
[    7.305370] procd: - early -
[    7.308051] procd: - watchdog -
[    7.874627] procd: - ubus -
[    7.900486] random: ubusd: uninitialized urandom read (4 bytes read, 34 bits of entropy available)
[    7.932034] random: ubusd: uninitialized urandom read (4 bytes read, 35 bits of entropy available)
[    7.940142] random: ubusd: uninitialized urandom read (4 bytes read, 35 bits of entropy available)
[    7.948659] random: ubusd: uninitialized urandom read (4 bytes read, 35 bits of entropy available)
[    7.958350] random: ubusd: uninitialized urandom read (4 bytes read, 35 bits of entropy available)
[    7.966580] random: ubusd: uninitialized urandom read (4 bytes read, 35 bits of entropy available)
[    7.975825] random: ubusd: uninitialized urandom read (4 bytes read, 35 bits of entropy available)
[    7.984797] random: ubusd: uninitialized urandom read (4 bytes read, 35 bits of entropy available)
[    7.994025] procd: - init -
Please press Enter to activate this console.
[    8.013414] eth0: port 1 lost link
[    8.318253] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
[    8.338367] NET: Registered protocol family 8
[    8.341336] NET: Registered protocol family 20
[    8.357062] PPP generic driver version 2.4.2
[    8.370320] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    8.436621] Lantiq (VRX) DSL CPE MEI driver, version 1.5.17.6, (c) 2007-2015 Lantiq Beteiligungs-GmbH & Co. KG

Lantiq CPE API Driver version: DSL CPE API V4.17.18.6
[    8.493324]
[    8.493324] Predefined debug level: 3
[    8.509558] Loading modules backported from Linux version wt-2016-06-20-0-gbc17424
[    8.515741] Backport generated by backports.git backports-20160216-7-g5735958
[    8.528710] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.543248] Infineon Technologies DEU driver version 2.0.0
[    8.549027] IFX DEU DES initialized (multiblock).
[    8.553341] IFX DEU AES initialized (multiblock).
[    8.557429] IFX DEU ARC4 initialized (multiblock).
[    8.562084] IFX DEU SHA1 initialized.
[    8.565648] IFX DEU MD5 initialized.
[    8.569264] IFX DEU SHA1_HMAC initialized.
[    8.573312] IFX DEU MD5_HMAC initialized.
[    8.599114] nf_conntrack version 0.5.0 (1942 buckets, 7768 max)
[    8.627120] NET: Registered protocol family 24
[    8.652345] xt_time: kernel timezone is -0000
[    8.943160] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
[    8.947588] rt2800pci 0000:00:0e.0: failed to load eeprom property
[    8.953606] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT3062.eeprom'.
[    8.964862] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected
[    8.971233] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008 detected
[   10.605079] random: jshn: uninitialized urandom read (4 bytes read, 46 bits of entropy available)
[   17.219377] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.228776] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[   18.077486] eth0: port 1 got link
[   18.079378] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   18.125306] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   19.277136] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
[   19.293272] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40
[   19.430633] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.625149] wlan0: authenticate with 02:13:49:11:66:8c
[   21.649471] wlan0: send auth to 02:13:49:11:66:8c (try 1/3)
[   21.655256] wlan0: authenticated
[   21.661254] wlan0: associate with 02:13:49:11:66:8c (try 1/3)
[   21.672352] wlan0: RX AssocResp from 02:13:49:11:66:8c (capab=0xc11 status=0 aid=3)
[   21.678977] wlan0: associated
[   21.681979] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   27.625267] random: nonblocking pool is initialized



BusyBox v1.25.0 () built-in shell (ash)

     _________
    /        /\      _    ___ ___  ___
   /  LE    /  \    | |  | __|   \| __|
  /    DE  /    \   | |__| _|| |) | _|
 /________/  LE  \  |____|___|___/|___|                      lede-project.org
 \        \   DE /
  \    LE  \    /  -----------------------------------------------------------
   \  DE    \  /    Reboot (HEAD, r1811)
    \________\/    -----------------------------------------------------------

root@OpenWrt-DG03:/#
Even installed newest Privoxy within Luci's webinterface, i got now all working fine on latest Fimware :)
If you watch thee logs closely you see we primairly boot of OpenWrt's U-Boot 2013.10-openwrt5 of Nov 18 2014 ...

DG.
admin
Site Admin
Posts: 473
Joined: 06 Feb 2007, 13:36

Re: LEDE OpenWrt on ZyXEL

Post by admin »

Running LEDE OpenWrt from clean install (and old config) works fine.
But as i don't have a xDSL line, so not connected, and the ' default' code 'wants' such connection available we see a lot of DSL messages in system log:

Code: Select all

Sat Oct  8 15:40:17 2016 daemon.err uhttpd[1085]: killall: vdsl_cpe_control: no process killed
Sat Oct  8 15:40:17 2016 daemon.err uhttpd[1085]: killall: vdsl_cpe_control: no process killed
Sat Oct  8 15:40:17 2016 daemon.err uhttpd[1085]: killall: vdsl_cpe_control: no process killed
Sat Oct  8 15:40:17 2016 daemon.err uhttpd[1085]: killall: vdsl_cpe_control: no process killed
Sat Oct  8 15:40:17 2016 daemon.err uhttpd[1085]: killall: vdsl_cpe_control: no process killed
Sat Oct  8 15:40:21 2016 daemon.err uhttpd[1085]: killall: vdsl_cpe_control: no process killed
Sat Oct  8 15:40:22 2016 daemon.err uhttpd[1085]: killall: vdsl_cpe_control: no process killed
Sat Oct  8 15:40:22 2016 daemon.err uhttpd[1085]: killall: vdsl_cpe_control: no process killed
Sat Oct  8 15:40:22 2016 daemon.err uhttpd[1085]: killall: vdsl_cpe_control: no process killed
Sat Oct  8 15:40:22 2016 daemon.err uhttpd[1085]: killall: vdsl_cpe_control: no process killed
Sat Oct  8 15:40:22 2016 daemon.err uhttpd[1085]: killall: vdsl_cpe_control: no process killed
Sat Oct  8 15:40:22 2016 daemon.err uhttpd[1085]: killall: vdsl_cpe_control: no process killed
Sat Oct  8 15:40:22 2016 daemon.err uhttpd[1085]: killall: vdsl_cpe_control: no process killed
Sat Oct  8 15:40:22 2016 daemon.err uhttpd[1085]: killall: vdsl_cpe_control: no process killed
Sat Oct  8 15:40:22 2016 daemon.err uhttpd[1085]: killall: vdsl_cpe_control: no process killed
I've seen somewhere a ' log'-solution, and i'm able to apply that one from:
https://forum.openwrt.org/viewtopic.php ... 85#p325385
...

But now we have sometimes:

Code: Select all

Sun Oct  9 00:57:07 2016 daemon.err uhttpd[1066]: Collected errors:
Sun Oct  9 00:57:07 2016 daemon.err uhttpd[1066]:  * opkg_conf_load: Could not lock /var/lock/opkg.lock: Resource temporarily unavailable.
Sun Oct  9 01:19:36 2016 daemon.err uhttpd[1066]: sh: write error: Broken pipe
Sun Oct  9 01:19:36 2016 daemon.err uhttpd[1066]: sh: write error: Broken pipe
Sun Oct  9 01:19:36 2016 daemon.err uhttpd[1066]: sh: write error: Broken pipe
Sun Oct  9 01:33:56 2016 daemon.err uhttpd[1066]: sh: write error: Broken pipe
Sun Oct  9 01:33:56 2016 daemon.err uhttpd[1066]: sh: write error: Broken pipe
Sun Oct  9 01:33:56 2016 daemon.err uhttpd[1066]: sh: write error: Broken pipe
Sun Oct  9 01:33:56 2016 daemon.err uhttpd[1066]: sh: write error: Broken pipe
Sun Oct  9 01:33:56 2016 daemon.err uhttpd[1066]: sh: write error: Broken pipe
I guess not the 'right'solution ...

DG.
admin
Site Admin
Posts: 473
Joined: 06 Feb 2007, 13:36

Re: LEDE OpenWrt on ZyXEL

Post by admin »

For those who will run DSL functionality, update your device with the latest LEDE-Project code!
With a default update you will need to read further and re-install several (or more items) but my first view on DSL looks good, although everybody should know, i dont have a DSL line to test it ...

Image

I used this ubifs-sysupgrade.bin file (NOTE: the link will get you an updated -latest- version!!) to upgrade my OpenWrt Designated Driver r48507+ to the LEDE r1811 version.

Oké, it's a 'clean' install, you need to SSH to the box, make sure you have internet access and install LUCI, etc etc to even start the web-GUI, but anyway, within several hours I've now running my test-device this new code.
The ZyXEL P-2812HNU-F1 users also know to SCP file RT3062.eeprom to the /lib/firmware library on the 'new' box 4 WiFi functionality.

Found out even some 'default' kmod packages are no longer needed 4 example USB storage (kmod-usb-storage) and already seen in luci's mount-GUI, but not working fully yet, tho ...

Facing version differences ;) already need an update:

Code: Select all

root@OpenWrt-DG03:/# opkg install kmod-usb-storage
Installing kmod-usb-storage (4.4.24-1) to root...
Downloading http://downloads.lede-project.org/snapshots/targets/lantiq/xrx200/packages/kmod-usb-storage_4.4.24-1_mips_24kc.ipk.
Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-usb-storage:
 *      kernel (= 4.4.24-1-b080b3e480c1ec7875bec275ea11d50c) *  kernel (= 4.4.24-1-b080b3e480c1ec7875bec275ea11d50c) *
 * opkg_install_cmd: Cannot install package kmod-usb-storage.
root@OpenWrt-DG03:/#
As i am running: Kernel Version 4.4.23
Anyway, it's working.

DG.
admin
Site Admin
Posts: 473
Joined: 06 Feb 2007, 13:36

Re: LEDE OpenWrt on ZyXEL

Post by admin »

Although it has same -and on some items better- performance, i still see some strange graphics ...

Image

Image

Image

DG.
admin
Site Admin
Posts: 473
Joined: 06 Feb 2007, 13:36

Re: LEDE OpenWrt on ZyXEL

Post by admin »

Weird WLAN issue ...
As i faced this 2 or 3 times already, i post about it.
When this occurs, only a reboot of the box will fix this.

And the rule with : sh: write error: Broken pipe or ACS: Survey is missing noise floor,
are NOT the most important one ... :)

Full log:

Code: Select all

Fri Oct 21 10:42:27 2016 daemon.info dnsmasq[1174]: using nameserver 208.67.220.220#53
Fri Oct 21 10:42:27 2016 daemon.info dnsmasq[1174]: read /etc/hosts - 1 addresses
Fri Oct 21 10:42:27 2016 daemon.info dnsmasq[1174]: read /tmp/hosts/dhcp - 2 addresses
Fri Oct 21 10:42:27 2016 daemon.info dnsmasq-dhcp[1174]: read /etc/ethers - 0 addresses
Fri Oct 21 10:42:31 2016 daemon.notice privoxy[1317]: Started successfully
Fri Oct 21 10:42:32 2016 daemon.notice netifd: radio0 (963): ACS: Survey is missing noise floor
Fri Oct 21 10:42:32 2016 daemon.notice netifd: radio0 (963): ACS: Survey is missing noise floor
Fri Oct 21 10:42:32 2016 daemon.notice netifd: radio0 (963): ACS: Survey is missing noise floor
Fri Oct 21 10:42:32 2016 daemon.notice netifd: radio0 (963): ACS: Survey is missing noise floor
Fri Oct 21 10:42:32 2016 daemon.notice netifd: radio0 (963): ACS: Survey is missing noise floor
Fri Oct 21 10:42:32 2016 daemon.notice netifd: radio0 (963): ACS: Survey is missing noise floor
Fri Oct 21 10:42:32 2016 daemon.notice netifd: radio0 (963): ACS: Survey is missing noise floor
Fri Oct 21 10:42:32 2016 daemon.notice netifd: radio0 (963): ACS: Survey is missing noise floor
Fri Oct 21 10:42:32 2016 daemon.notice netifd: radio0 (963): ACS: Survey is missing noise floor
Fri Oct 21 10:42:32 2016 daemon.notice netifd: radio0 (963): ACS: Survey is missing noise floor
Fri Oct 21 10:42:32 2016 daemon.notice netifd: radio0 (963): ACS: Survey is missing noise floor
Fri Oct 21 10:42:32 2016 daemon.notice netifd: radio0 (963): wlan0-1: ACS-COMPLETED freq=2412 channel=1
Fri Oct 21 10:42:32 2016 daemon.notice netifd: radio0 (963): wlan0-1: interface state ACS->HT_SCAN
Fri Oct 21 10:42:33 2016 kern.notice kernel: [   29.373241] random: nonblocking pool is initialized
Fri Oct 21 10:42:33 2016 daemon.notice netifd: radio0 (963): 20/40 MHz operation not permitted on channel pri=1 sec=5 based on overlapping BSSes
Fri Oct 21 10:42:33 2016 daemon.notice netifd: radio0 (963): Using interface wlan0-1 with hwaddr 00:0c:43:30:62:b1 and ssid "OpenWrt"
Fri Oct 21 10:42:34 2016 daemon.notice netifd: radio0 (963): wlan0-1: interface state HT_SCAN->ENABLED
Fri Oct 21 10:42:34 2016 daemon.notice netifd: radio0 (963): wlan0-1: AP-ENABLED 
Fri Oct 21 10:42:34 2016 kern.info kernel: [   30.730635] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Fri Oct 21 10:42:34 2016 daemon.notice netifd: radio0 (963): Successfully initialized wpa_supplicant
Fri Oct 21 10:42:35 2016 daemon.notice netifd: Interface 'wan' is enabled
Fri Oct 21 10:42:36 2016 kern.info kernel: [   32.915862] wlan0: authenticate with 02:13:49:11:66:8c
Fri Oct 21 10:42:36 2016 kern.info kernel: [   32.941577] wlan0: send auth to 02:13:49:11:66:8c (try 1/3)
Fri Oct 21 10:42:36 2016 kern.info kernel: [   32.947858] wlan0: authenticated
Fri Oct 21 10:42:36 2016 kern.info kernel: [   32.957290] wlan0: associate with 02:13:49:11:66:8c (try 1/3)
Fri Oct 21 10:42:36 2016 kern.info kernel: [   32.965594] wlan0: RX AssocResp from 02:13:49:11:66:8c (capab=0xc11 status=0 aid=1)
Fri Oct 21 10:42:36 2016 kern.info kernel: [   32.972090] wlan0: associated
Fri Oct 21 10:42:36 2016 kern.info kernel: [   32.975116] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Fri Oct 21 10:42:36 2016 daemon.notice netifd: Network device 'wlan0' link is up
Fri Oct 21 10:42:36 2016 daemon.notice netifd: Interface 'wan' has link connectivity 
Fri Oct 21 10:42:36 2016 daemon.notice netifd: Interface 'wan' is setting up now
Fri Oct 21 10:42:36 2016 daemon.notice netifd: wan (1366): udhcpc: started, v1.25.0
Fri Oct 21 10:42:37 2016 daemon.notice netifd: wan (1366): udhcpc: sending discover
Fri Oct 21 10:42:38 2016 kern.info kernel: [   34.815211] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
Fri Oct 21 10:42:38 2016 kern.info kernel: [   34.820603] br-lan: port 2(wlan0-1) entered forwarding state
Fri Oct 21 10:42:38 2016 kern.info kernel: [   34.826082] br-lan: port 2(wlan0-1) entered forwarding state
Fri Oct 21 10:42:38 2016 daemon.notice netifd: Network device 'wlan0-1' link is up
Fri Oct 21 10:42:40 2016 daemon.notice netifd: wan (1366): udhcpc: sending discover
Fri Oct 21 10:42:40 2016 daemon.notice netifd: wan (1366): udhcpc: sending select for 192.168.2.49
Fri Oct 21 10:42:40 2016 daemon.notice netifd: wan (1366): udhcpc: lease of 192.168.2.49 obtained, lease time 86400
Fri Oct 21 10:42:40 2016 daemon.notice netifd: Interface 'wan' is now up
Fri Oct 21 10:42:40 2016 daemon.info dnsmasq[1174]: reading /tmp/resolv.conf.auto
Fri Oct 21 10:42:40 2016 daemon.info dnsmasq[1174]: using local addresses only for domain lan3
Fri Oct 21 10:42:40 2016 daemon.info dnsmasq[1174]: using nameserver 8.8.8.8#53
Fri Oct 21 10:42:40 2016 daemon.info dnsmasq[1174]: using nameserver 208.67.220.220#53
Fri Oct 21 10:42:40 2016 daemon.info dnsmasq[1174]: using nameserver 192.168.2.1#53
Fri Oct 21 10:42:40 2016 kern.info kernel: [   36.829250] br-lan: port 2(wlan0-1) entered forwarding state
Fri Oct 21 10:42:40 2016 user.notice firewall: Reloading firewall due to ifup of wan (wlan0)
Fri Oct 21 10:42:40 2016 daemon.info privoxy[1317]: Restart request due to 'ifup' of interface 'wan'
Fri Oct 21 10:42:41 2016 daemon.notice privoxy[1317]: Shutdown successfully
Fri Oct 21 10:42:42 2016 daemon.info dnsmasq-dhcp[1174]: DHCPREQUEST(br-lan) 192.168.1.115 cc:52:af:41:5e:03 
Fri Oct 21 10:42:42 2016 daemon.info dnsmasq-dhcp[1174]: DHCPACK(br-lan) 192.168.1.115 cc:52:af:41:5e:03 DGPCi701
Mon Oct 24 16:30:34 2016 daemon.notice privoxy[1832]: Started successfully
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq[1174]: exiting on receipt of SIGTERM
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq[1935]: started, version 2.76 cachesize 150
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq[1935]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq[1935]: DNS service limited to local subnets
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq-dhcp[1935]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 12h
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq[1935]: using local addresses only for domain lan3
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq[1935]: reading /tmp/resolv.conf.auto
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq[1935]: using local addresses only for domain lan3
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq[1935]: using nameserver 8.8.8.8#53
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq[1935]: using nameserver 208.67.220.220#53
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq[1935]: using nameserver 192.168.2.1#53
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq[1935]: read /etc/hosts - 1 addresses
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq[1935]: read /tmp/hosts/dhcp - 2 addresses
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq-dhcp[1935]: read /etc/ethers - 0 addresses
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq[1935]: read /etc/hosts - 1 addresses
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq[1935]: read /tmp/hosts/dhcp - 2 addresses
Mon Oct 24 16:30:34 2016 daemon.info dnsmasq-dhcp[1935]: read /etc/ethers - 0 addresses
Mon Oct 24 16:30:44 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 16:30:44 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 16:30:44 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 16:30:44 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 16:30:44 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 16:30:44 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 16:30:44 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 16:30:44 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 16:30:44 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 16:30:44 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 16:30:44 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 16:30:44 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 16:30:44 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 16:30:44 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 16:30:44 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 16:35:04 2016 daemon.notice privoxy[1832]: Shutdown successfully
Mon Oct 24 16:35:05 2016 daemon.err uhttpd[1126]: 2016-10-24 16:35:05.695 775b7d74 Error: Ignoring unrecognized directive 'boot-delay	10' (245469056U) in line 25 in configuration file (/var/etc/privoxy.conf).
Mon Oct 24 16:35:06 2016 daemon.notice privoxy[3152]: Started successfully
Mon Oct 24 16:50:30 2016 kern.info kernel: [ 1236.778459] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 1 (2417/0 MHz)
Mon Oct 24 19:20:35 2016 kern.info kernel: [10241.769333] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 2 (2427/0 MHz)
Mon Oct 24 19:25:30 2016 kern.info kernel: [10536.778291] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 1 (2417/0 MHz)
Mon Oct 24 19:50:35 2016 kern.info kernel: [12041.756190] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 2 (2427/0 MHz)
Mon Oct 24 20:35:30 2016 kern.info kernel: [14736.831672] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 1 (2417/0 MHz)
Mon Oct 24 20:52:05 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 IEEE 802.11: authenticated
Mon Oct 24 20:52:05 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 IEEE 802.11: associated (aid 1)
Mon Oct 24 20:52:05 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: pairwise key handshake completed (RSN)
Mon Oct 24 20:52:08 2016 daemon.info dnsmasq-dhcp[1935]: DHCPDISCOVER(br-lan) 78:3a:84:d4:d7:22 
Mon Oct 24 20:52:08 2016 daemon.info dnsmasq-dhcp[1935]: DHCPOFFER(br-lan) 192.168.1.129 78:3a:84:d4:d7:22 
Mon Oct 24 20:52:08 2016 daemon.info dnsmasq-dhcp[1935]: DHCPDISCOVER(br-lan) 78:3a:84:d4:d7:22 
Mon Oct 24 20:52:08 2016 daemon.info dnsmasq-dhcp[1935]: DHCPOFFER(br-lan) 192.168.1.129 78:3a:84:d4:d7:22 
Mon Oct 24 20:52:09 2016 daemon.info dnsmasq-dhcp[1935]: DHCPREQUEST(br-lan) 192.168.1.129 78:3a:84:d4:d7:22 
Mon Oct 24 20:52:09 2016 daemon.info dnsmasq-dhcp[1935]: DHCPACK(br-lan) 192.168.1.129 78:3a:84:d4:d7:22 iPad-DG
Mon Oct 24 21:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 21:05:35 2016 kern.info kernel: [16541.842807] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 2 (2427/0 MHz)
Mon Oct 24 21:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 21:15:30 2016 kern.info kernel: [17136.789150] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 1 (2417/0 MHz)
Mon Oct 24 21:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 21:30:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 21:40:26 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 21:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 21:54:38 2016 authpriv.info dropbear[12239]: Child connection from 192.168.1.115:56293
Mon Oct 24 21:54:44 2016 authpriv.notice dropbear[12239]: Password auth succeeded for 'root' from 192.168.1.115:56293
Mon Oct 24 22:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 22:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 22:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 22:30:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 22:30:32 2016 daemon.info dnsmasq-dhcp[1935]: DHCPREQUEST(br-lan) 192.168.1.115 cc:52:af:41:5e:03 
Mon Oct 24 22:30:32 2016 daemon.info dnsmasq-dhcp[1935]: DHCPACK(br-lan) 192.168.1.115 cc:52:af:41:5e:03 DGPCi701
Mon Oct 24 22:35:35 2016 kern.info kernel: [21941.823904] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 2 (2427/0 MHz)
Mon Oct 24 22:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 22:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 22:55:30 2016 kern.info kernel: [23136.836430] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 1 (2417/0 MHz)
Mon Oct 24 23:00:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 23:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 23:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 23:30:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 23:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 23:40:49 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:49 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:49 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:49 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:49 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:49 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:49 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:49 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:49 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:49 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:49 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:49 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:49 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:49 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:49 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:49 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:50 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:50 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:50 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:50 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:50 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:50 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:50 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:50 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:50 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:50 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:51 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:51 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:51 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:51 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:51 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:51 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:51 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:51 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:51 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:51 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:51 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:51 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:51 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:51 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:40:51 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Mon Oct 24 23:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Mon Oct 24 23:50:34 2016 kern.info kernel: [26441.091121] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 2 (2427/0 MHz)
Tue Oct 25 00:00:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 00:00:30 2016 kern.info kernel: [27036.754219] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 1 (2417/0 MHz)
Tue Oct 25 00:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 00:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 00:30:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 00:30:35 2016 kern.info kernel: [28841.765233] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 2 (2427/0 MHz)
Tue Oct 25 00:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 00:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 01:00:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 01:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 01:12:47 2016 kern.info kernel: [31373.511797] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 1 (2417/0 MHz)
Tue Oct 25 01:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 01:30:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 01:40:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 01:42:52 2016 kern.info kernel: [33178.420708] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 2 (2427/0 MHz)
Tue Oct 25 01:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 01:57:47 2016 kern.info kernel: [34073.707084] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 1 (2417/0 MHz)
Tue Oct 25 02:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 02:10:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 02:13:25 2016 authpriv.info dropbear[12239]: Exit (root): Exited normally
Tue Oct 25 02:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 02:30:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 02:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 02:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 02:57:52 2016 kern.info kernel: [37679.019560] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 2 (2427/0 MHz)
Tue Oct 25 03:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 03:07:48 2016 kern.info kernel: [38274.275628] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 1 (2417/0 MHz)
Tue Oct 25 03:10:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 03:14:46 2016 daemon.info dnsmasq-dhcp[1935]: DHCPREQUEST(br-lan) 192.168.1.129 78:3a:84:d4:d7:22 
Tue Oct 25 03:14:46 2016 daemon.info dnsmasq-dhcp[1935]: DHCPACK(br-lan) 192.168.1.129 78:3a:84:d4:d7:22 iPad-DG
Tue Oct 25 03:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 03:30:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 03:32:38 2016 daemon.notice netifd: Network device 'eth0' link is down
Tue Oct 25 03:32:38 2016 kern.info kernel: [39764.787413] eth0: port 0 lost link
Tue Oct 25 03:32:38 2016 kern.info kernel: [39764.791073] br-lan: port 1(eth0.1) entered disabled state
Tue Oct 25 03:32:38 2016 daemon.notice netifd: VLAN 'eth0.1' link is down
Tue Oct 25 03:32:41 2016 daemon.notice netifd: Network device 'eth0' link is up
Tue Oct 25 03:32:41 2016 kern.info kernel: [39767.787415] eth0: port 0 got link
Tue Oct 25 03:32:41 2016 kern.info kernel: [39767.790707] br-lan: port 1(eth0.1) entered forwarding state
Tue Oct 25 03:32:41 2016 kern.info kernel: [39767.794974] br-lan: port 1(eth0.1) entered forwarding state
Tue Oct 25 03:32:41 2016 daemon.notice netifd: VLAN 'eth0.1' link is up
Tue Oct 25 03:32:43 2016 kern.info kernel: [39769.795231] br-lan: port 1(eth0.1) entered forwarding state
Tue Oct 25 03:32:49 2016 daemon.notice netifd: Network device 'eth0' link is down
Tue Oct 25 03:32:49 2016 kern.info kernel: [39775.787287] eth0: port 0 lost link
Tue Oct 25 03:32:49 2016 kern.info kernel: [39775.790950] br-lan: port 1(eth0.1) entered disabled state
Tue Oct 25 03:32:49 2016 daemon.notice netifd: VLAN 'eth0.1' link is down
Tue Oct 25 03:32:50 2016 daemon.notice netifd: Network device 'eth0' link is up
Tue Oct 25 03:32:50 2016 kern.info kernel: [39776.787317] eth0: port 0 got link
Tue Oct 25 03:32:50 2016 kern.info kernel: [39776.790627] br-lan: port 1(eth0.1) entered forwarding state
Tue Oct 25 03:32:50 2016 kern.info kernel: [39776.794894] br-lan: port 1(eth0.1) entered forwarding state
Tue Oct 25 03:32:50 2016 daemon.notice netifd: VLAN 'eth0.1' link is up
Tue Oct 25 03:32:52 2016 kern.info kernel: [39778.795121] br-lan: port 1(eth0.1) entered forwarding state
Tue Oct 25 03:32:54 2016 daemon.info dnsmasq-dhcp[1935]: DHCPREQUEST(br-lan) 192.168.1.115 cc:52:af:41:5e:03 
Tue Oct 25 03:32:54 2016 daemon.warn dnsmasq-dhcp[1935]: Ignoring domain DGTNT03 for DHCP host name DGPCi701
Tue Oct 25 03:32:54 2016 daemon.info dnsmasq-dhcp[1935]: DHCPACK(br-lan) 192.168.1.115 cc:52:af:41:5e:03 DGPCi701
Tue Oct 25 03:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 03:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 04:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 04:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 04:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 04:30:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 04:30:30 2016 daemon.notice netifd: wan (1366): udhcpc: sending renew
Tue Oct 25 04:30:30 2016 daemon.notice netifd: wan (1366): udhcpc: lease of 192.168.2.49 obtained, lease time 86400
Tue Oct 25 04:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 04:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 05:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 05:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 05:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 05:30:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 05:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 05:50:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 05:52:17 2016 daemon.info dnsmasq-dhcp[1935]: DHCPREQUEST(br-lan) 192.168.1.129 78:3a:84:d4:d7:22 
Tue Oct 25 05:52:17 2016 daemon.info dnsmasq-dhcp[1935]: DHCPACK(br-lan) 192.168.1.129 78:3a:84:d4:d7:22 iPad-DG
Tue Oct 25 06:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 06:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 06:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 06:30:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 06:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 06:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 07:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 07:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 07:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 07:30:26 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 07:40:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 07:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 08:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 08:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 08:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 08:30:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 08:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 08:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 09:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 09:10:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 09:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 09:30:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 09:33:04 2016 daemon.info dnsmasq-dhcp[1935]: DHCPREQUEST(br-lan) 192.168.1.115 cc:52:af:41:5e:03 
Tue Oct 25 09:33:04 2016 daemon.warn dnsmasq-dhcp[1935]: Ignoring domain DGTNT03 for DHCP host name DGPCi701
Tue Oct 25 09:33:04 2016 daemon.info dnsmasq-dhcp[1935]: DHCPACK(br-lan) 192.168.1.115 cc:52:af:41:5e:03 DGPCi701
Tue Oct 25 09:38:46 2016 daemon.notice netifd: Network device 'eth0' link is down
Tue Oct 25 09:38:46 2016 kern.info kernel: [61732.526109] eth0: port 0 lost link
Tue Oct 25 09:38:46 2016 kern.info kernel: [61732.529652] br-lan: port 1(eth0.1) entered disabled state
Tue Oct 25 09:38:46 2016 daemon.notice netifd: VLAN 'eth0.1' link is down
Tue Oct 25 09:38:48 2016 daemon.notice netifd: Network device 'eth0' link is up
Tue Oct 25 09:38:48 2016 kern.info kernel: [61734.526110] eth0: port 0 got link
Tue Oct 25 09:38:48 2016 kern.info kernel: [61734.529395] br-lan: port 1(eth0.1) entered forwarding state
Tue Oct 25 09:38:48 2016 kern.info kernel: [61734.533672] br-lan: port 1(eth0.1) entered forwarding state
Tue Oct 25 09:38:48 2016 daemon.notice netifd: VLAN 'eth0.1' link is up
Tue Oct 25 09:38:49 2016 daemon.info dnsmasq-dhcp[1935]: DHCPREQUEST(br-lan) 192.168.1.115 cc:52:af:41:5e:03 
Tue Oct 25 09:38:49 2016 daemon.warn dnsmasq-dhcp[1935]: Ignoring domain DGTNT03 for DHCP host name DGPCi701
Tue Oct 25 09:38:49 2016 daemon.info dnsmasq-dhcp[1935]: DHCPACK(br-lan) 192.168.1.115 cc:52:af:41:5e:03 DGPCi701
Tue Oct 25 09:38:50 2016 kern.info kernel: [61736.533931] br-lan: port 1(eth0.1) entered forwarding state
Tue Oct 25 09:39:10 2016 daemon.notice netifd: Network device 'eth0' link is down
Tue Oct 25 09:39:10 2016 kern.info kernel: [61756.525834] eth0: port 0 lost link
Tue Oct 25 09:39:10 2016 kern.info kernel: [61756.529386] br-lan: port 1(eth0.1) entered disabled state
Tue Oct 25 09:39:10 2016 daemon.notice netifd: VLAN 'eth0.1' link is down
Tue Oct 25 09:39:13 2016 daemon.notice netifd: Network device 'eth0' link is up
Tue Oct 25 09:39:13 2016 kern.info kernel: [61759.525813] eth0: port 0 got link
Tue Oct 25 09:39:13 2016 kern.info kernel: [61759.528968] br-lan: port 1(eth0.1) entered forwarding state
Tue Oct 25 09:39:13 2016 kern.info kernel: [61759.533380] br-lan: port 1(eth0.1) entered forwarding state
Tue Oct 25 09:39:13 2016 daemon.notice netifd: VLAN 'eth0.1' link is up
Tue Oct 25 09:39:13 2016 daemon.info dnsmasq-dhcp[1935]: DHCPREQUEST(br-lan) 192.168.1.115 cc:52:af:41:5e:03 
Tue Oct 25 09:39:13 2016 daemon.info dnsmasq-dhcp[1935]: DHCPACK(br-lan) 192.168.1.115 cc:52:af:41:5e:03 DGPCi701
Tue Oct 25 09:39:15 2016 kern.info kernel: [61761.533633] br-lan: port 1(eth0.1) entered forwarding state
Tue Oct 25 09:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 09:42:58 2016 daemon.info dnsmasq-dhcp[1935]: DHCPREQUEST(br-lan) 192.168.1.115 cc:52:af:41:5e:03 
Tue Oct 25 09:42:58 2016 daemon.warn dnsmasq-dhcp[1935]: Ignoring domain DGTNT03 for DHCP host name DGPCi701
Tue Oct 25 09:42:58 2016 daemon.info dnsmasq-dhcp[1935]: DHCPACK(br-lan) 192.168.1.115 cc:52:af:41:5e:03 DGPCi701
Tue Oct 25 09:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 10:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 10:05:25 2016 authpriv.info dropbear[18682]: Child connection from 192.168.1.115:50026
Tue Oct 25 10:05:32 2016 authpriv.notice dropbear[18682]: Password auth succeeded for 'root' from 192.168.1.115:50026
Tue Oct 25 10:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 10:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 10:30:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 10:40:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 10:50:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 11:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 11:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 11:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 11:30:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:04 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:39:05 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 11:45:24 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:24 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:24 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:24 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:45:25 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 11:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 12:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:45 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:07:46 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 12:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 12:20:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 12:25:35 2016 kern.info kernel: [71741.791178] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 2 (2427/0 MHz)
Tue Oct 25 12:30:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 12:32:22 2016 kern.info kernel: [72148.115826] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 1 (2417/0 MHz)
Tue Oct 25 12:40:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 12:50:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 13:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 13:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 13:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 13:30:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 13:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 13:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 14:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 14:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 14:11:46 2016 daemon.info dnsmasq-dhcp[1935]: DHCPREQUEST(br-lan) 192.168.1.129 78:3a:84:d4:d7:22 
Tue Oct 25 14:11:46 2016 daemon.info dnsmasq-dhcp[1935]: DHCPACK(br-lan) 192.168.1.129 78:3a:84:d4:d7:22 iPad-DG
Tue Oct 25 14:20:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 14:30:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 14:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 14:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 15:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:16 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:17 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:17 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:17 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:17 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:17 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:17 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:17 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:17 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:17 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:17 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:17 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:17 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:17 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:17 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:06:17 2016 daemon.err uhttpd[1126]: sh: write error: Broken pipe
Tue Oct 25 15:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 15:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 15:30:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 15:39:13 2016 daemon.info dnsmasq-dhcp[1935]: DHCPREQUEST(br-lan) 192.168.1.115 cc:52:af:41:5e:03 
Tue Oct 25 15:39:13 2016 daemon.info dnsmasq-dhcp[1935]: DHCPACK(br-lan) 192.168.1.115 cc:52:af:41:5e:03 DGPCi701
Tue Oct 25 15:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 15:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 16:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 16:10:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 16:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 16:30:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 16:30:30 2016 daemon.notice netifd: wan (1366): udhcpc: sending renew
Tue Oct 25 16:30:30 2016 daemon.notice netifd: wan (1366): udhcpc: lease of 192.168.2.49 obtained, lease time 86400
Tue Oct 25 16:33:24 2016 kern.info kernel: [86610.221571] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 2 (2427/0 MHz)
Tue Oct 25 16:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 16:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 16:50:29 2016 kern.info kernel: [87635.351860] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 1 (2417/0 MHz)
Tue Oct 25 17:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 17:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 17:15:34 2016 kern.info kernel: [89140.438411] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 2 (2427/0 MHz)
Tue Oct 25 17:20:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 17:25:31 2016 kern.info kernel: [89736.710000] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 1 (2417/0 MHz)
Tue Oct 25 17:30:25 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 17:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 17:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 17:55:12 2016 authpriv.info dropbear[18682]: Exit (root): Exited normally
Tue Oct 25 18:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 18:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 18:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 18:20:34 2016 kern.info kernel: [93040.247926] wlan0: AP 02:13:49:11:66:8c changed bandwidth, new config is 2417 MHz, width 2 (2427/0 MHz)
Tue Oct 25 18:30:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 18:40:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 18:50:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 19:00:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 19:10:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 19:20:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 19:25:59 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 IEEE 802.11: disconnected due to excessive missing ACKs
Tue Oct 25 19:25:59 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 IEEE 802.11: authenticated
Tue Oct 25 19:25:59 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 IEEE 802.11: associated (aid 1)
Tue Oct 25 19:26:00 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: pairwise key handshake completed (RSN)
Tue Oct 25 19:26:00 2016 daemon.info dnsmasq-dhcp[1935]: DHCPREQUEST(br-lan) 192.168.1.129 78:3a:84:d4:d7:22 
Tue Oct 25 19:26:00 2016 daemon.info dnsmasq-dhcp[1935]: DHCPACK(br-lan) 192.168.1.129 78:3a:84:d4:d7:22 iPad-DG
Tue Oct 25 19:30:24 2016 daemon.info hostapd: wlan0-1: STA 78:3a:84:d4:d7:22 WPA: group key handshake completed (RSN)
Tue Oct 25 19:30:39 2016 kern.warn kernel: [97244.907694] ieee80211 phy0: rt2x00lib_rxdone_read_signal: Warning - Frame received with unrecognized signal, mode=0x0001, signal=0x010c, type=4
Tue Oct 25 19:34:12 2016 daemon.notice netifd: wan (1366): udhcpc: received SIGTERM
Tue Oct 25 19:34:12 2016 daemon.notice netifd: Interface 'wan' is now down
Tue Oct 25 19:34:12 2016 daemon.notice netifd: Interface 'wan' is disabled
Tue Oct 25 19:34:12 2016 daemon.notice netifd: Interface 'wan' is enabled
Tue Oct 25 19:34:12 2016 daemon.notice netifd: Interface 'wan' is setting up now
Tue Oct 25 19:34:12 2016 daemon.info dnsmasq[1935]: reading /tmp/resolv.conf.auto
Tue Oct 25 19:34:12 2016 daemon.info dnsmasq[1935]: using local addresses only for domain lan3
Tue Oct 25 19:34:12 2016 daemon.info dnsmasq[1935]: using nameserver 8.8.8.8#53
Tue Oct 25 19:34:12 2016 daemon.info dnsmasq[1935]: using nameserver 208.67.220.220#53
Tue Oct 25 19:34:13 2016 daemon.notice netifd: wan (23371): udhcpc: started, v1.25.0
Tue Oct 25 19:34:13 2016 daemon.notice netifd: wan (23371): udhcpc: sending discover
Tue Oct 25 19:34:13 2016 kern.info kernel: [97459.364162] wlan0: deauthenticating from 02:13:49:11:66:8c by local choice (Reason: 3=DEAUTH_LEAVING)
Tue Oct 25 19:34:14 2016 kern.warn kernel: [97459.544275] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
Tue Oct 25 19:34:14 2016 kern.warn kernel: [97459.724297] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
Tue Oct 25 19:34:14 2016 daemon.notice netifd: Network device 'wlan0' link is down
Tue Oct 25 19:34:14 2016 daemon.notice netifd: Interface 'wan' has link connectivity loss
Tue Oct 25 19:34:14 2016 kern.info kernel: [97459.749112] device wlan0-1 left promiscuous mode
Tue Oct 25 19:34:14 2016 kern.info kernel: [97459.752451] br-lan: port 2(wlan0-1) entered disabled state
Tue Oct 25 19:34:14 2016 daemon.notice netifd: wan (23371): udhcpc: received SIGTERM
Tue Oct 25 19:34:14 2016 kern.warn kernel: [97459.968222] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
Tue Oct 25 19:34:14 2016 daemon.notice netifd: Network device 'wlan0-1' link is down
Tue Oct 25 19:34:14 2016 kern.warn kernel: [97460.188270] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
Tue Oct 25 19:34:14 2016 daemon.notice netifd: Interface 'wan' is disabled
Tue Oct 25 19:34:15 2016 daemon.notice netifd: radio0 (23436): command failed: Not supported (-122)
Tue Oct 25 19:34:15 2016 daemon.notice netifd: radio0 (23436): sh: acs_survey: out of range
Tue Oct 25 19:34:16 2016 daemon.notice netifd: radio0 (23436): Configuration file: /var/run/hostapd-phy0.conf
Tue Oct 25 19:34:17 2016 kern.info kernel: [97462.521591] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
Tue Oct 25 19:34:17 2016 kern.info kernel: [97462.544959] device wlan0-1 entered promiscuous mode
Tue Oct 25 19:34:17 2016 daemon.notice netifd: radio0 (23436): wlan0-1: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Oct 25 19:34:17 2016 daemon.notice netifd: radio0 (23436): ACS: Automatic channel selection started, this may take a bit
Tue Oct 25 19:34:17 2016 daemon.notice netifd: radio0 (23436): wlan0-1: interface state COUNTRY_UPDATE->ACS
Tue Oct 25 19:34:17 2016 daemon.notice netifd: radio0 (23436): wlan0-1: ACS-STARTED 
Tue Oct 25 19:34:17 2016 daemon.info dnsmasq[1935]: exiting on receipt of SIGTERM
Tue Oct 25 19:34:17 2016 daemon.info dnsmasq[23683]: started, version 2.76 cachesize 150
Tue Oct 25 19:34:17 2016 daemon.info dnsmasq[23683]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Tue Oct 25 19:34:17 2016 daemon.info dnsmasq[23683]: DNS service limited to local subnets
Tue Oct 25 19:34:17 2016 daemon.info dnsmasq-dhcp[23683]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 12h
Tue Oct 25 19:34:17 2016 daemon.info dnsmasq[23683]: using local addresses only for domain lan3
Tue Oct 25 19:34:17 2016 daemon.info dnsmasq[23683]: reading /tmp/resolv.conf.auto
Tue Oct 25 19:34:17 2016 daemon.info dnsmasq[23683]: using local addresses only for domain lan3
Tue Oct 25 19:34:17 2016 daemon.info dnsmasq[23683]: using nameserver 8.8.8.8#53
Tue Oct 25 19:34:17 2016 daemon.info dnsmasq[23683]: using nameserver 208.67.220.220#53
Tue Oct 25 19:34:17 2016 daemon.info dnsmasq[23683]: read /etc/hosts - 1 addresses
Tue Oct 25 19:34:17 2016 daemon.info dnsmasq[23683]: read /tmp/hosts/dhcp - 2 addresses
Tue Oct 25 19:34:17 2016 daemon.info dnsmasq-dhcp[23683]: read /etc/ethers - 0 addresses
Tue Oct 25 19:34:18 2016 daemon.notice netifd: radio0 (23436): handle_probe_req: send failed
Tue Oct 25 19:34:25 2016 daemon.notice netifd: radio0 (23436): ACS: Survey is missing noise floor
Tue Oct 25 19:34:25 2016 daemon.notice netifd: radio0 (23436): ACS: Survey is missing noise floor
Tue Oct 25 19:34:25 2016 daemon.notice netifd: radio0 (23436): ACS: Survey is missing noise floor
Tue Oct 25 19:34:25 2016 daemon.notice netifd: radio0 (23436): ACS: Survey is missing noise floor
Tue Oct 25 19:34:25 2016 daemon.notice netifd: radio0 (23436): ACS: Survey is missing noise floor
Tue Oct 25 19:34:25 2016 daemon.notice netifd: radio0 (23436): ACS: Survey is missing noise floor
Tue Oct 25 19:34:25 2016 daemon.notice netifd: radio0 (23436): ACS: Survey is missing noise floor
Tue Oct 25 19:34:25 2016 daemon.notice netifd: radio0 (23436): ACS: Survey is missing noise floor
Tue Oct 25 19:34:25 2016 daemon.notice netifd: radio0 (23436): ACS: Survey is missing noise floor
Tue Oct 25 19:34:25 2016 daemon.notice netifd: radio0 (23436): ACS: Survey is missing noise floor
Tue Oct 25 19:34:25 2016 daemon.notice netifd: radio0 (23436): ACS: Survey is missing noise floor
Tue Oct 25 19:34:25 2016 daemon.notice netifd: radio0 (23436): ACS: Survey is missing noise floor
Tue Oct 25 19:34:25 2016 daemon.notice netifd: radio0 (23436): wlan0-1: ACS-COMPLETED freq=2417 channel=2
Tue Oct 25 19:34:25 2016 daemon.notice netifd: radio0 (23436): wlan0-1: interface state ACS->HT_SCAN
Tue Oct 25 19:34:26 2016 daemon.notice netifd: radio0 (23436): 20/40 MHz operation not permitted on channel pri=2 sec=6 based on overlapping BSSes
Tue Oct 25 19:34:26 2016 daemon.notice netifd: radio0 (23436): Using interface wlan0-1 with hwaddr 00:0c:43:30:62:b1 and ssid "OpenWrt"
Tue Oct 25 19:34:27 2016 daemon.notice netifd: radio0 (23436): wlan0-1: interface state HT_SCAN->ENABLED
Tue Oct 25 19:34:27 2016 daemon.notice netifd: radio0 (23436): wlan0-1: AP-ENABLED 
Tue Oct 25 19:34:27 2016 kern.info kernel: [97473.413529] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Tue Oct 25 19:34:28 2016 daemon.notice netifd: radio0 (23436): Successfully initialized wpa_supplicant
Tue Oct 25 19:34:29 2016 daemon.notice netifd: Interface 'wan' is enabled
Tue Oct 25 19:34:30 2016 kern.info kernel: [97475.764923] wlan0: authenticate with 02:13:49:11:66:8c
Tue Oct 25 19:34:30 2016 kern.info kernel: [97475.796373] wlan0: send auth to 02:13:49:11:66:8c (try 1/3)
Tue Oct 25 19:34:30 2016 kern.info kernel: [97475.804725] wlan0: authenticated
Tue Oct 25 19:34:30 2016 kern.info kernel: [97475.824098] wlan0: associate with 02:13:49:11:66:8c (try 1/3)
Tue Oct 25 19:34:30 2016 kern.info kernel: [97475.840182] wlan0: RX AssocResp from 02:13:49:11:66:8c (capab=0xc11 status=0 aid=1)
Tue Oct 25 19:34:30 2016 kern.info kernel: [97475.846685] wlan0: associated
Tue Oct 25 19:34:30 2016 kern.info kernel: [97475.849579] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Tue Oct 25 19:34:30 2016 daemon.notice netifd: Network device 'wlan0' link is up
Tue Oct 25 19:34:30 2016 daemon.notice netifd: Interface 'wan' has link connectivity 
Tue Oct 25 19:34:30 2016 daemon.notice netifd: Interface 'wan' is setting up now
Tue Oct 25 19:34:30 2016 kern.err kernel: [97476.164292] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2
Tue Oct 25 19:34:30 2016 kern.err kernel: [97476.164292] Please file bug report to http://rt2x00.serialmonkey.com
Tue Oct 25 19:34:30 2016 daemon.notice netifd: wan (24384): udhcpc: started, v1.25.0
Tue Oct 25 19:34:31 2016 daemon.notice netifd: wan (24384): udhcpc: sending discover
Tue Oct 25 19:34:32 2016 kern.info kernel: [97478.276360] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
Tue Oct 25 19:34:32 2016 kern.info kernel: [97478.281775] br-lan: port 2(wlan0-1) entered forwarding state
Tue Oct 25 19:34:32 2016 kern.info kernel: [97478.287230] br-lan: port 2(wlan0-1) entered forwarding state
Tue Oct 25 19:34:32 2016 daemon.notice netifd: Network device 'wlan0-1' link is up
Tue Oct 25 19:34:34 2016 daemon.notice netifd: wan (24384): udhcpc: sending discover
Tue Oct 25 19:34:34 2016 kern.info kernel: [97480.288022] br-lan: port 2(wlan0-1) entered forwarding state
Tue Oct 25 19:34:37 2016 daemon.notice netifd: wan (24384): udhcpc: sending discover
Tue Oct 25 19:35:45 2016 kern.info kernel: [97551.087199] wlan0: deauthenticating from 02:13:49:11:66:8c by local choice (Reason: 3=DEAUTH_LEAVING)
Tue Oct 25 19:35:45 2016 daemon.notice netifd: Network device 'wlan0' link is down
Tue Oct 25 19:35:45 2016 daemon.notice netifd: Interface 'wan' has link connectivity loss
Tue Oct 25 19:35:45 2016 kern.info kernel: [97551.124697] device wlan0-1 left promiscuous mode
Tue Oct 25 19:35:45 2016 kern.info kernel: [97551.128045] br-lan: port 2(wlan0-1) entered disabled state
Tue Oct 25 19:35:45 2016 daemon.notice netifd: Network device 'wlan0-1' link is down
Tue Oct 25 19:35:45 2016 daemon.notice netifd: wan (24384): udhcpc: received SIGTERM
Tue Oct 25 19:35:55 2016 daemon.notice netifd: Interface 'wan' is disabled
Tue Oct 25 19:35:56 2016 daemon.notice netifd: radio0 (28996): command failed: Not supported (-122)
Tue Oct 25 19:35:56 2016 daemon.notice netifd: radio0 (28996): sh: acs_survey: out of range
Tue Oct 25 19:35:56 2016 daemon.notice netifd: radio0 (28996): Configuration file: /var/run/hostapd-phy0.conf
Tue Oct 25 19:35:57 2016 kern.info kernel: [97562.564410] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
Tue Oct 25 19:35:57 2016 kern.info kernel: [97562.582241] device wlan0-1 entered promiscuous mode
Tue Oct 25 19:35:57 2016 daemon.notice netifd: radio0 (28996): wlan0-1: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Oct 25 19:35:57 2016 daemon.notice netifd: radio0 (28996): ACS: Automatic channel selection started, this may take a bit
Tue Oct 25 19:35:57 2016 daemon.notice netifd: radio0 (28996): wlan0-1: interface state COUNTRY_UPDATE->ACS
Tue Oct 25 19:35:57 2016 daemon.notice netifd: radio0 (28996): wlan0-1: ACS-STARTED 
Tue Oct 25 19:36:05 2016 daemon.notice netifd: radio0 (28996): ACS: Survey is missing noise floor
Tue Oct 25 19:36:05 2016 daemon.notice netifd: radio0 (28996): ACS: Survey is missing noise floor
Tue Oct 25 19:36:05 2016 daemon.notice netifd: radio0 (28996): ACS: Survey is missing noise floor
Tue Oct 25 19:36:05 2016 daemon.notice netifd: radio0 (28996): ACS: Survey is missing noise floor
Tue Oct 25 19:36:05 2016 daemon.notice netifd: radio0 (28996): ACS: Survey is missing noise floor
Tue Oct 25 19:36:05 2016 daemon.notice netifd: radio0 (28996): ACS: Survey is missing noise floor
Tue Oct 25 19:36:05 2016 daemon.notice netifd: radio0 (28996): ACS: Survey is missing noise floor
Tue Oct 25 19:36:05 2016 daemon.notice netifd: radio0 (28996): ACS: Survey is missing noise floor
Tue Oct 25 19:36:05 2016 daemon.notice netifd: radio0 (28996): ACS: Survey is missing noise floor
Tue Oct 25 19:36:05 2016 daemon.notice netifd: radio0 (28996): ACS: Survey is missing noise floor
Tue Oct 25 19:36:05 2016 daemon.notice netifd: radio0 (28996): ACS: Survey is missing noise floor
Tue Oct 25 19:36:05 2016 daemon.notice netifd: radio0 (28996): ACS: Survey is missing noise floor
Tue Oct 25 19:36:05 2016 daemon.notice netifd: radio0 (28996): wlan0-1: ACS-COMPLETED freq=2417 channel=2
Tue Oct 25 19:36:05 2016 daemon.notice netifd: radio0 (28996): wlan0-1: interface state ACS->HT_SCAN
Tue Oct 25 19:36:06 2016 daemon.notice netifd: radio0 (28996): 20/40 MHz operation not permitted on channel pri=2 sec=6 based on overlapping BSSes
Tue Oct 25 19:36:06 2016 daemon.notice netifd: radio0 (28996): Using interface wlan0-1 with hwaddr 00:0c:43:30:62:b1 and ssid "OpenWrt"
Tue Oct 25 19:36:07 2016 daemon.notice netifd: radio0 (28996): wlan0-1: interface state HT_SCAN->ENABLED
Tue Oct 25 19:36:07 2016 daemon.notice netifd: radio0 (28996): wlan0-1: AP-ENABLED 
Tue Oct 25 19:36:07 2016 kern.info kernel: [97572.865010] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Tue Oct 25 19:36:07 2016 daemon.notice netifd: radio0 (28996): Successfully initialized wpa_supplicant
Tue Oct 25 19:36:08 2016 daemon.notice netifd: Interface 'wan' is enabled
Tue Oct 25 19:36:09 2016 kern.info kernel: [97574.728854] wlan0: authenticate with 02:13:49:11:66:8c
Tue Oct 25 19:36:09 2016 kern.info kernel: [97574.755224] wlan0: send auth to 02:13:49:11:66:8c (try 1/3)
Tue Oct 25 19:36:09 2016 kern.info kernel: [97574.763127] wlan0: authenticated
Tue Oct 25 19:36:09 2016 kern.info kernel: [97574.782904] wlan0: associate with 02:13:49:11:66:8c (try 1/3)
Tue Oct 25 19:36:09 2016 kern.info kernel: [97574.792566] wlan0: RX AssocResp from 02:13:49:11:66:8c (capab=0xc11 status=0 aid=1)
Tue Oct 25 19:36:09 2016 kern.info kernel: [97574.799081] wlan0: associated
Tue Oct 25 19:36:09 2016 kern.info kernel: [97574.802015] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Tue Oct 25 19:36:09 2016 daemon.notice netifd: Network device 'wlan0' link is up
Tue Oct 25 19:36:09 2016 daemon.notice netifd: Interface 'wan' has link connectivity 
Tue Oct 25 19:36:09 2016 daemon.notice netifd: Interface 'wan' is setting up now
Tue Oct 25 19:36:09 2016 daemon.notice netifd: wan (29753): udhcpc: started, v1.25.0
Tue Oct 25 19:36:09 2016 daemon.notice netifd: wan (29753): udhcpc: sending discover
Tue Oct 25 19:36:10 2016 kern.err kernel: [97576.079240] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2
Tue Oct 25 19:36:10 2016 kern.err kernel: [97576.079240] Please file bug report to http://rt2x00.serialmonkey.com
Tue Oct 25 19:36:11 2016 kern.info kernel: [97577.023443] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
Tue Oct 25 19:36:11 2016 kern.info kernel: [97577.028815] br-lan: port 2(wlan0-1) entered forwarding state
Tue Oct 25 19:36:11 2016 kern.info kernel: [97577.034306] br-lan: port 2(wlan0-1) entered forwarding state
Tue Oct 25 19:36:11 2016 daemon.notice netifd: Network device 'wlan0-1' link is up
Tue Oct 25 19:36:11 2016 kern.info kernel: [97577.043141] wlan0: deauthenticating from 02:13:49:11:66:8c by local choice (Reason: 3=DEAUTH_LEAVING)
Tue Oct 25 19:36:11 2016 kern.info kernel: [97577.069477] device wlan0-1 left promiscuous mode
Tue Oct 25 19:36:11 2016 kern.info kernel: [97577.072821] br-lan: port 2(wlan0-1) entered disabled state
Tue Oct 25 19:36:11 2016 daemon.notice netifd: Network device 'wlan0' link is down
Tue Oct 25 19:36:11 2016 daemon.notice netifd: Interface 'wan' has link connectivity loss
Tue Oct 25 19:36:11 2016 daemon.notice netifd: Network device 'wlan0-1' link is down
Tue Oct 25 19:36:11 2016 daemon.notice netifd: wan (29753): udhcpc: received SIGTERM
Tue Oct 25 19:36:21 2016 daemon.notice netifd: Interface 'wan' is disabled
Tue Oct 25 19:36:21 2016 daemon.notice netifd: radio0 (30369): command failed: Not supported (-122)
Tue Oct 25 19:36:21 2016 daemon.notice netifd: radio0 (30369): sh: acs_survey: out of range
Tue Oct 25 19:36:22 2016 daemon.notice netifd: radio0 (30369): Configuration file: /var/run/hostapd-phy0.conf
Tue Oct 25 19:36:22 2016 kern.info kernel: [97587.936020] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
Tue Oct 25 19:36:22 2016 kern.info kernel: [97587.946513] device wlan0-1 entered promiscuous mode
Tue Oct 25 19:36:22 2016 daemon.notice netifd: radio0 (30369): wlan0-1: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Oct 25 19:36:22 2016 daemon.notice netifd: radio0 (30369): ACS: Automatic channel selection started, this may take a bit
Tue Oct 25 19:36:22 2016 daemon.notice netifd: radio0 (30369): wlan0-1: interface state COUNTRY_UPDATE->ACS
Tue Oct 25 19:36:22 2016 daemon.notice netifd: radio0 (30369): wlan0-1: ACS-STARTED 
Tue Oct 25 19:36:30 2016 daemon.notice netifd: radio0 (30369): ACS: Survey is missing noise floor
Tue Oct 25 19:36:30 2016 daemon.notice netifd: radio0 (30369): ACS: Survey is missing noise floor
Tue Oct 25 19:36:30 2016 daemon.notice netifd: radio0 (30369): ACS: Survey is missing noise floor
Tue Oct 25 19:36:30 2016 daemon.notice netifd: radio0 (30369): ACS: Survey is missing noise floor
Tue Oct 25 19:36:30 2016 daemon.notice netifd: radio0 (30369): ACS: Survey is missing noise floor
Tue Oct 25 19:36:30 2016 daemon.notice netifd: radio0 (30369): ACS: Survey is missing noise floor
Tue Oct 25 19:36:30 2016 daemon.notice netifd: radio0 (30369): ACS: Survey is missing noise floor
Tue Oct 25 19:36:30 2016 daemon.notice netifd: radio0 (30369): ACS: Survey is missing noise floor
Tue Oct 25 19:36:30 2016 daemon.notice netifd: radio0 (30369): ACS: Survey is missing noise floor
Tue Oct 25 19:36:30 2016 daemon.notice netifd: radio0 (30369): ACS: Survey is missing noise floor
Tue Oct 25 19:36:30 2016 daemon.notice netifd: radio0 (30369): ACS: Survey is missing noise floor
Tue Oct 25 19:36:30 2016 daemon.notice netifd: radio0 (30369): ACS: Survey is missing noise floor
Tue Oct 25 19:36:30 2016 daemon.notice netifd: radio0 (30369): wlan0-1: ACS-COMPLETED freq=2417 channel=2
Tue Oct 25 19:36:30 2016 daemon.notice netifd: radio0 (30369): wlan0-1: interface state ACS->HT_SCAN
Tue Oct 25 19:36:32 2016 daemon.notice netifd: radio0 (30369): 20/40 MHz operation not permitted on channel pri=2 sec=6 based on overlapping BSSes
Tue Oct 25 19:36:32 2016 daemon.notice netifd: radio0 (30369): Using interface wlan0-1 with hwaddr 00:0c:43:30:62:b1 and ssid "OpenWrt"
Tue Oct 25 19:36:32 2016 daemon.notice netifd: radio0 (30369): wlan0-1: interface state HT_SCAN->ENABLED
Tue Oct 25 19:36:32 2016 daemon.notice netifd: radio0 (30369): wlan0-1: AP-ENABLED 
Tue Oct 25 19:36:32 2016 kern.info kernel: [97598.224824] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Tue Oct 25 19:36:32 2016 daemon.notice netifd: radio0 (30369): Successfully initialized wpa_supplicant
Tue Oct 25 19:36:34 2016 daemon.notice netifd: Interface 'wan' is enabled
Tue Oct 25 19:36:35 2016 kern.info kernel: [97600.799919] wlan0: authenticate with 02:13:49:11:66:8c
Tue Oct 25 19:36:35 2016 kern.info kernel: [97600.830863] wlan0: send auth to 02:13:49:11:66:8c (try 1/3)
Tue Oct 25 19:36:35 2016 kern.info kernel: [97600.836687] wlan0: authenticated
Tue Oct 25 19:36:35 2016 kern.info kernel: [97600.842615] wlan0: associate with 02:13:49:11:66:8c (try 1/3)
Tue Oct 25 19:36:35 2016 kern.info kernel: [97600.853940] wlan0: RX AssocResp from 02:13:49:11:66:8c (capab=0xc11 status=0 aid=1)
Tue Oct 25 19:36:35 2016 kern.info kernel: [97600.860443] wlan0: associated
Tue Oct 25 19:36:35 2016 kern.info kernel: [97600.863550] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Tue Oct 25 19:36:35 2016 daemon.notice netifd: Network device 'wlan0' link is up
Tue Oct 25 19:36:35 2016 daemon.notice netifd: Interface 'wan' has link connectivity 
Tue Oct 25 19:36:35 2016 daemon.notice netifd: Interface 'wan' is setting up now
Tue Oct 25 19:36:35 2016 daemon.notice netifd: wan (30988): udhcpc: started, v1.25.0
Tue Oct 25 19:36:35 2016 daemon.notice netifd: wan (30988): udhcpc: sending discover
Tue Oct 25 19:36:36 2016 kern.err kernel: [97602.106934] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2
Tue Oct 25 19:36:36 2016 kern.err kernel: [97602.106934] Please file bug report to http://rt2x00.serialmonkey.com
Tue Oct 25 19:36:37 2016 kern.info kernel: [97603.306447] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
Tue Oct 25 19:36:37 2016 kern.info kernel: [97603.311854] br-lan: port 2(wlan0-1) entered forwarding state
Tue Oct 25 19:36:37 2016 kern.info kernel: [97603.317366] br-lan: port 2(wlan0-1) entered forwarding state
Tue Oct 25 19:36:37 2016 daemon.notice netifd: Network device 'wlan0-1' link is up
Tue Oct 25 19:36:38 2016 daemon.notice netifd: wan (30988): udhcpc: sending discover
Tue Oct 25 19:36:39 2016 kern.info kernel: [97605.318501] br-lan: port 2(wlan0-1) entered forwarding state
Tue Oct 25 19:36:41 2016 daemon.notice netifd: wan (30988): udhcpc: sending discover
Tue Oct 25 19:37:02 2016 daemon.notice netifd: Interface 'wan' is disabled
Tue Oct 25 19:37:02 2016 daemon.notice netifd: Interface 'wan' has link connectivity loss
Tue Oct 25 19:37:02 2016 daemon.notice netifd: wan (30988): udhcpc: received SIGTERM
Tue Oct 25 19:37:02 2016 daemon.notice netifd: Interface 'wan' is now down
Tue Oct 25 19:37:03 2016 kern.info kernel: [97628.649263] wlan0: deauthenticating from 02:13:49:11:66:8c by local choice (Reason: 3=DEAUTH_LEAVING)
Tue Oct 25 19:37:03 2016 kern.info kernel: [97628.682593] device wlan0-1 left promiscuous mode
Tue Oct 25 19:37:03 2016 kern.info kernel: [97628.685880] br-lan: port 2(wlan0-1) entered disabled state
Tue Oct 25 19:37:03 2016 daemon.notice netifd: Network device 'wlan0-1' link is down
Tue Oct 25 19:37:13 2016 daemon.notice netifd: radio0 (636): command failed: Not supported (-122)
Tue Oct 25 19:37:14 2016 daemon.notice netifd: radio0 (636): sh: acs_survey: out of range
Tue Oct 25 19:37:14 2016 daemon.notice netifd: radio0 (636): Configuration file: /var/run/hostapd-phy0.conf
Tue Oct 25 19:37:14 2016 kern.info kernel: [97640.291764] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Tue Oct 25 19:37:14 2016 kern.info kernel: [97640.331208] device wlan0 entered promiscuous mode
Tue Oct 25 19:37:14 2016 daemon.notice netifd: radio0 (636): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Oct 25 19:37:14 2016 daemon.notice netifd: radio0 (636): ACS: Automatic channel selection started, this may take a bit
Tue Oct 25 19:37:14 2016 daemon.notice netifd: radio0 (636): wlan0: interface state COUNTRY_UPDATE->ACS
Tue Oct 25 19:37:14 2016 daemon.notice netifd: radio0 (636): wlan0: ACS-STARTED
This occurs on my ZyXEL P-2812HNU-F1 box, with 2 WLAN 'lines' active, 1 is working as WAN, the other as part of LAN (WLAN-repeater).
Most strange message of above log is:

Code: Select all

Tue Oct 25 19:34:30 2016 kern.err kernel: [97476.164292] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2
Tue Oct 25 19:34:30 2016 kern.err kernel: [97476.164292] Please file bug report to http://rt2x00.serialmonkey.com
After this message, you can disable and enable WiFi and it looks like it get a connection, but in real it won't connect.
Only a reboot will help.

DG.
admin
Site Admin
Posts: 473
Joined: 06 Feb 2007, 13:36

Re: LEDE OpenWrt on ZyXEL

Post by admin »

First active build (2nd as the 1st build was missing the eeprom file for WLAN activity)

Image

Code: Select all

 Linux version 4.4.30 (openwrt@LD861) (gcc version 5.4.0 (LEDE GCC 5.4.0 r2144) ) #0 Tue Nov 8 19:00:42 2016
This build has the following options:
  • Luci
    statistics
    block-mount (still to be tested)
  • Privoxy
  • Tor
  • Nano (editor)
  • htop
And is working as 'default' router. Only LAN & WLAN are behind Tor Network.
Other options are possible, like only WLAN or only LAN behind Tor.
This even could work using the router as anonymous repeater.

Current running OpenWrt config can be kept.

DG.
admin
Site Admin
Posts: 473
Joined: 06 Feb 2007, 13:36

Re: LEDE OpenWrt on ZyXEL

Post by admin »

But still weird CPU usage ... even on latest build.

Image

Disabled DSL-functionality (again) & rebooted the device.
Maybe have to setup syslog server to monitor the box, as 2 days, the box was dead next morning.
What does the tor-job when there's no client request (even connected)?

Did also see strange 'usr sbin hostapd' cpu usage ...
After manually stopped DSL (and disabled it in startup) i have to reboot ones.

Kernel logs:

Code: Select all

[    0.000000] Linux version 4.4.30 (openwrt@LD861) (gcc version 5.4.0 (LEDE GCC 5.4.0 r2144) ) #0 Tue Nov 8 19:00:42 2016
[    0.000000] SoC: xRX200 rev 1.1
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019555 (MIPS 34Kc)
[    0.000000] MIPS: machine is P2812HNUF1 - ZyXEL P-2812HNU-F1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 804e03b0, node_mem_map 8100a4a0
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00044862
[    0.000000] Readback ErrCtl register=00044862
[    0.000000] Memory: 123276K/131072K available (3793K kernel code, 162K rwdata, 1156K rodata, 1208K init, 212K bss, 7796K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] Setting up vectored interrupts
[    0.000000] CPU Clock: 500MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
[    0.000011] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns
[    0.007855] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[    0.042306] pid_max: default: 32768 minimum: 301
[    0.047142] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.053714] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.067297] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.077076] pinctrl core: initialized pinctrl subsystem
[    0.082911] NET: Registered protocol family 16
[    0.092086] pinctrl-xway 1e100b10.pinmux: Init done
[    0.097588] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
[    0.207812] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[    0.223119] PCI host bridge /fpi@10000000/pci@E105400 ranges:
[    0.228766]  MEM 0x0000000018000000..0x0000000019ffffff
[    0.234018]   IO 0x000000001ae00000..0x000000001affffff
[    0.254167] gpio-stp-xway 1e100bb0.stp: Init done
[    0.259531] usbcore: registered new interface driver usbfs
[    0.265019] usbcore: registered new interface driver hub
[    0.270381] usbcore: registered new device driver usb
[    0.275876] PCI host bridge to bus 0000:00
[    0.279866] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
[    0.286772] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
[    0.293715] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.300570] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.308617] pci 0000:00:0e.0: [1814:3062] type 00 class 0x028000
[    0.308670] pci 0000:00:0e.0: reg 0x10: [mem 0xffff0000-0xffffffff]
[    0.309045] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.309091] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
[    0.316768] clocksource: Switched to clocksource MIPS
[    0.323322] NET: Registered protocol family 2
[    0.328447] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.335337] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.341716] TCP: Hash tables configured (established 1024 bind 1024)
[    0.348225] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.354070] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.360653] NET: Registered protocol family 1
[    0.365043] PCI: CLS 0 bytes, default 32
[    0.371455] gptu: totally 6 16-bit timers/counters
[    0.376289] gptu: misc_register on minor 63
[    0.380392] gptu: succeeded to request irq 126
[    0.384883] gptu: succeeded to request irq 127
[    0.389395] gptu: succeeded to request irq 128
[    0.393909] gptu: succeeded to request irq 129
[    0.398422] gptu: succeeded to request irq 130
[    0.402936] gptu: succeeded to request irq 131
[    0.407789] ralink,eeprom ralink_eep: using RT3062.eeprom as eeprom
[    0.414165] phy-xrx200 gphy-xrx200: requesting lantiq/vr9_phy11g_a1x.bin
[    0.421502] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 7D80000
[    0.427834] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 7D80000
[    0.534578] No VPEs reserved for AP/SP, not initialize VPE loader
[    0.534578] Pass maxvpes=<n> argument as kernel argument
[    0.545946] No TCs reserved for AP/SP, not initializing RTLX.
[    0.545946] Pass maxtcs=<n> argument as kernel argument
[    0.557907] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.564024] Crashlog allocated RAM at address 0x3f00000
[    0.588539] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.594285] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.608190] io scheduler noop registered
[    0.612010] io scheduler deadline registered (default)
[    0.617884] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[    0.626776] console [ttyLTQ0] enabled
[    0.634105] bootconsole [early0] disabled
[    0.645401] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[    0.650294] nand: Samsung NAND 128MiB 3,3V 8-bit
[    0.654909] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.662560] Scanning device for bad blocks
[    0.687041] Bad eraseblock 242 at 0x000001e40000
[    0.700966] Bad eraseblock 370 at 0x000002e40000
[    0.713189] Bad eraseblock 478 at 0x000003bc0000
[    0.752610] Bad eraseblock 909 at 0x0000071a0000
[    0.765443] 4 ofpart partitions found on MTD device 10000000.nand-parts
[    0.770624] Creating 4 MTD partitions on "10000000.nand-parts":
[    0.776543] 0x000000000000-0x000000040000 : "uboot"
[    0.783196] 0x000000040000-0x000000060000 : "uboot-env"
[    0.789119] 0x000000060000-0x000000260000 : "kernel"
[    0.794717] 0x000000260000-0x000008000000 : "ubi"
[    0.903436] libphy: lantiq,xrx200-mdio: probed
[    0.977502] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:00, irq=-1)
[    1.045477] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:01, irq=-1)
[    1.113462] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:11, irq=-1)
[    1.181462] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:13, irq=-1)
[    1.249477] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:05, irq=-1)
[    1.257729] wdt 1f8803f0.watchdog: Init done
[    1.264592] NET: Registered protocol family 10
[    1.274673] NET: Registered protocol family 17
[    1.277830] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.290345] 8021q: 802.1Q VLAN Support v1.8
[    1.299399] UBI: auto-attach mtd3
[    1.301144] ubi0: attaching mtd3
[    1.486956] ubi0: scanning is finished
[    1.501203] ubi0: attached mtd3 (name "ubi", size 125 MiB)
[    1.505287] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[    1.512128] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    1.518832] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
[    1.525619] ubi0: good PEBs: 1001, bad PEBs: 4, corrupted PEBs: 0
[    1.531711] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.538940] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1881164135
[    1.548076] ubi0: available PEBs: 0, total reserved PEBs: 1001, PEBs reserved for bad PEB handling: 16
[    1.557446] ubi0: background thread "ubi_bgt0d" started, PID 316
[    1.586491] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 318
[    1.614532] UBIFS (ubi0:0): recovery needed
[    1.754048] UBIFS (ubi0:0): recovery completed
[    1.757176] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.764469] UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.774382] UBIFS (ubi0:0): FS size: 125153280 bytes (119 MiB, 970 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
[    1.784991] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[    1.790833] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 539FF09C-8309-461A-8E8D-2842CD906CAB, small LPT model
[    1.802384] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    1.811837] Freeing unused kernel memory: 1208K (80502000 - 80630000)
[    1.956847] init: Console is alive
[    1.959076] init: - watchdog -
[    2.240152] SCSI subsystem initialized
[    2.273021] dwc2 1e101000.ifxhcd: requested GPIO 495
[    2.276581] dwc2 1e101000.ifxhcd: Configuration mismatch. Forcing host mode
[    3.140971] dwc2 1e101000.ifxhcd: DWC OTG Controller
[    3.144542] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
[    3.151905] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
[    3.157408] dwc2 1e101000.ifxhcd: Hardware does not support descriptor DMA mode -
[    3.164848] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
[    3.172296] hub 1-0:1.0: USB hub found
[    3.175256] hub 1-0:1.0: 1 port detected
[    3.179347] dwc2 1e106000.ifxhcd: Configuration mismatch. Forcing host mode
[    4.040969] dwc2 1e106000.ifxhcd: DWC OTG Controller
[    4.044558] dwc2 1e106000.ifxhcd: new USB bus registered, assigned bus number 2
[    4.051880] dwc2 1e106000.ifxhcd: irq 91, io mem 0x00000000
[    4.057398] dwc2 1e106000.ifxhcd: Hardware does not support descriptor DMA mode -
[    4.064841] dwc2 1e106000.ifxhcd: falling back to buffer DMA mode.
[    4.072454] hub 2-0:1.0: USB hub found
[    4.075255] hub 2-0:1.0: 1 port detected
[    4.091739] usbcore: registered new interface driver usb-storage
[    4.107840] init: - preinit -
[    4.112983] eth0: port 2 got link
[    4.249772] eth0: port 5 got link
[    4.332960] random: procd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
[    4.363657] IPv6: eth0: IPv6 duplicate address fe80::211:22ff:fe33:4455 detected!
[    7.483873] mount_root: mounting /dev/root
[    7.489168] mount_root: loading kmods from internal overlay
[    8.096716] block: attempting to load /etc/config/fstab
[    8.103813] block: extroot: not configured
[    8.110473] urandom-seed: Seeding with /etc/urandom.seed
[    8.158208] procd: - early -
[    8.161007] procd: - watchdog -
[    8.248871] eth0: port 5 lost link
[    8.728503] procd: - ubus -
[    8.754768] random: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
[    8.785264] random: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
[    8.793393] random: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
[    8.801891] random: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
[    8.811737] random: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
[    8.819815] random: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
[    8.829091] random: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
[    8.838021] random: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
[    8.847244] procd: - init -
[    9.112871] eth0: port 2 lost link
[    9.154358] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
[    9.179795] NET: Registered protocol family 8
[    9.182769] NET: Registered protocol family 20
[    9.219428] PPP generic driver version 2.4.2
[    9.232686] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.297829] Lantiq (VRX) DSL CPE MEI driver, version 1.5.17.6, (c) 2007-2015 Lantiq Beteiligungs-GmbH & Co. KG
[    9.297829] 
[    9.297829] Lantiq CPE API Driver version: DSL CPE API V4.17.18.6
[    9.356667] 
[    9.356667] Predefined debug level: 3
[    9.372534] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[    9.378719] Backport generated by backports.git backports-20160324-9-g0e38f5c
[    9.391452] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.405723] Infineon Technologies DEU driver version 2.0.0 
[    9.411779] IFX DEU DES initialized (multiblock).
[    9.416046] IFX DEU AES initialized (multiblock).
[    9.420186] IFX DEU ARC4 initialized (multiblock).
[    9.424856] IFX DEU SHA1 initialized.
[    9.428348] IFX DEU MD5 initialized.
[    9.432037] IFX DEU SHA1_HMAC initialized.
[    9.436073] IFX DEU MD5_HMAC initialized.
[    9.459787] nf_conntrack version 0.5.0 (1945 buckets, 7780 max)
[    9.487024] NET: Registered protocol family 24
[    9.492421] usbcore: registered new interface driver ums-alauda
[    9.499323] usbcore: registered new interface driver ums-cypress
[    9.506489] usbcore: registered new interface driver ums-datafab
[    9.513462] usbcore: registered new interface driver ums-freecom
[    9.520557] usbcore: registered new interface driver ums-isd200
[    9.527637] usbcore: registered new interface driver ums-jumpshot
[    9.534730] usbcore: registered new interface driver ums-karma
[    9.542169] usbcore: registered new interface driver ums-sddr09
[    9.549301] usbcore: registered new interface driver ums-sddr55
[    9.556566] usbcore: registered new interface driver ums-usbat
[    9.583731] xt_time: kernel timezone is -0000
[    9.884308] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
[    9.888826] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT3062.eeprom'.
[    9.900076] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected
[    9.906451] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008 detected
[    9.913981] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.487626] random: jshn: uninitialized urandom read (4 bytes read, 45 bits of entropy available)
[   14.353648] PTM 1.0.27    PTM (E1) firmware version 0.30
[   14.357574] ifxmips_ptm: PTM init succeed
[   19.147986] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.152667] eth0: port 2 got link
[   19.156863] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.190742] device eth0 entered promiscuous mode
[   19.215252] device eth0.2 entered promiscuous mode
[   19.242540] br-lan: port 1(eth0.2) entered forwarding state
[   19.246785] br-lan: port 1(eth0.2) entered forwarding state
[   19.253603] eth0: port 5 got link
[   21.248826] br-lan: port 1(eth0.2) entered forwarding state
[   22.335972] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
[   22.378134] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40
[   22.502283] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.559662] device wlan0 entered promiscuous mode
[   24.561058] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   24.566258] br-lan: port 2(wlan0) entered forwarding state
[   24.571591] br-lan: port 2(wlan0) entered forwarding state
[   24.594244] device wlan0-1 entered promiscuous mode
[   24.599699] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
[   24.604444] br-lan: port 3(wlan0-1) entered forwarding state
[   24.610097] br-lan: port 3(wlan0-1) entered forwarding state
[   25.218581] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[   26.572785] br-lan: port 2(wlan0) entered forwarding state
[   26.612832] br-lan: port 3(wlan0-1) entered forwarding state
[   28.196831] random: nonblocking pool is initialized
System logs:

Code: Select all

Tue Nov  8 23:49:20 2016 kern.notice kernel: [    0.000000] Linux version 4.4.30 (openwrt@LD861) (gcc version 5.4.0 (LEDE GCC 5.4.0 r2144) ) #0 Tue Nov 8 19:00:42 2016
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] SoC: xRX200 rev 1.1
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] CPU0 revision is: 00019555 (MIPS 34Kc)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] MIPS: machine is P2812HNUF1 - ZyXEL P-2812HNU-F1
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] Determined physical RAM map:
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000]  memory: 08000000 @ 00000000 (usable)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] Zone ranges:
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] Movable zone start for each node
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] Early memory node ranges
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Tue Nov  8 23:49:20 2016 kern.debug kernel: [    0.000000] On node 0 totalpages: 32768
Tue Nov  8 23:49:20 2016 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 804e03b0, node_mem_map 8100a4a0
Tue Nov  8 23:49:20 2016 kern.debug kernel: [    0.000000]   Normal zone: 256 pages used for memmap
Tue Nov  8 23:49:20 2016 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Tue Nov  8 23:49:20 2016 kern.debug kernel: [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
Tue Nov  8 23:49:20 2016 kern.warn kernel: [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Tue Nov  8 23:49:20 2016 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Tue Nov  8 23:49:20 2016 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Tue Nov  8 23:49:20 2016 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] Writing ErrCtl register=00044862
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] Readback ErrCtl register=00044862
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] Memory: 123276K/131072K available (3793K kernel code, 162K rwdata, 1156K rodata, 1208K init, 212K bss, 7796K reserved, 0K cma-reserved)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] NR_IRQS:256
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] Setting up vectored interrupts
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] CPU Clock: 500MHz
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.000011] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.007855] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.042306] pid_max: default: 32768 minimum: 301
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.047142] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.053714] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.067297] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.077076] pinctrl core: initialized pinctrl subsystem
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.082911] NET: Registered protocol family 16
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.092086] pinctrl-xway 1e100b10.pinmux: Init done
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.097588] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels: 28
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.207812] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.223119] PCI host bridge /fpi@10000000/pci@E105400 ranges:
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.228766]  MEM 0x0000000018000000..0x0000000019ffffff
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.234018]   IO 0x000000001ae00000..0x000000001affffff
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.254167] gpio-stp-xway 1e100bb0.stp: Init done
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.259531] usbcore: registered new interface driver usbfs
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.265019] usbcore: registered new interface driver hub
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.270381] usbcore: registered new device driver usb
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.275876] PCI host bridge to bus 0000:00
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.279866] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.286772] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.293715] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.300570] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Tue Nov  8 23:49:20 2016 kern.debug kernel: [    0.308617] pci 0000:00:0e.0: [1814:3062] type 00 class 0x028000
Tue Nov  8 23:49:20 2016 kern.debug kernel: [    0.308670] pci 0000:00:0e.0: reg 0x10: [mem 0xffff0000-0xffffffff]
Tue Nov  8 23:49:20 2016 kern.debug kernel: [    0.309045] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.309091] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.316768] clocksource: Switched to clocksource MIPS
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.323322] NET: Registered protocol family 2
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.328447] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.335337] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.341716] TCP: Hash tables configured (established 1024 bind 1024)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.348225] UDP hash table entries: 256 (order: 0, 4096 bytes)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.354070] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.360653] NET: Registered protocol family 1
Tue Nov  8 23:49:20 2016 kern.debug kernel: [    0.365043] PCI: CLS 0 bytes, default 32
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.371455] gptu: totally 6 16-bit timers/counters
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.376289] gptu: misc_register on minor 63
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.380392] gptu: succeeded to request irq 126
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.384883] gptu: succeeded to request irq 127
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.389395] gptu: succeeded to request irq 128
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.393909] gptu: succeeded to request irq 129
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.398422] gptu: succeeded to request irq 130
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.402936] gptu: succeeded to request irq 131
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.407789] ralink,eeprom ralink_eep: using RT3062.eeprom as eeprom
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.414165] phy-xrx200 gphy-xrx200: requesting lantiq/vr9_phy11g_a1x.bin
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.421502] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 7D80000
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.427834] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 7D80000
Tue Nov  8 23:49:20 2016 kern.warn kernel: [    0.534578] No VPEs reserved for AP/SP, not initialize VPE loader
Tue Nov  8 23:49:20 2016 kern.warn kernel: [    0.534578] Pass maxvpes=<n> argument as kernel argument
Tue Nov  8 23:49:20 2016 kern.warn kernel: [    0.545946] No TCs reserved for AP/SP, not initializing RTLX.
Tue Nov  8 23:49:20 2016 kern.warn kernel: [    0.545946] Pass maxtcs=<n> argument as kernel argument
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.557907] futex hash table entries: 256 (order: -1, 3072 bytes)
Tue Nov  8 23:49:20 2016 kern.warn kernel: [    0.564024] Crashlog allocated RAM at address 0x3f00000
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.588539] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.594285] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.608190] io scheduler noop registered
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.612010] io scheduler deadline registered (default)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.617884] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.626776] console [ttyLTQ0] enabled
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.634105] bootconsole [early0] disabled
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.645401] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.650294] nand: Samsung NAND 128MiB 3,3V 8-bit
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.654909] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.662560] Scanning device for bad blocks
Tue Nov  8 23:49:20 2016 kern.warn kernel: [    0.687041] Bad eraseblock 242 at 0x000001e40000
Tue Nov  8 23:49:20 2016 kern.warn kernel: [    0.700966] Bad eraseblock 370 at 0x000002e40000
Tue Nov  8 23:49:20 2016 kern.warn kernel: [    0.713189] Bad eraseblock 478 at 0x000003bc0000
Tue Nov  8 23:49:20 2016 kern.warn kernel: [    0.752610] Bad eraseblock 909 at 0x0000071a0000
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    0.765443] 4 ofpart partitions found on MTD device 10000000.nand-parts
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    0.770624] Creating 4 MTD partitions on "10000000.nand-parts":
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    0.776543] 0x000000000000-0x000000040000 : "uboot"
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    0.783196] 0x000000040000-0x000000060000 : "uboot-env"
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    0.789119] 0x000000060000-0x000000260000 : "kernel"
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    0.794717] 0x000000260000-0x000008000000 : "ubi"
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.903436] libphy: lantiq,xrx200-mdio: probed
Tue Nov  8 23:49:20 2016 kern.info kernel: [    0.977502] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:00, irq=-1)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    1.045477] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:01, irq=-1)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    1.113462] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:11, irq=-1)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    1.181462] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:13, irq=-1)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    1.249477] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.3] (phy_addr=0:05, irq=-1)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    1.257729] wdt 1f8803f0.watchdog: Init done
Tue Nov  8 23:49:20 2016 kern.info kernel: [    1.264592] NET: Registered protocol family 10
Tue Nov  8 23:49:20 2016 kern.info kernel: [    1.274673] NET: Registered protocol family 17
Tue Nov  8 23:49:20 2016 kern.info kernel: [    1.277830] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Tue Nov  8 23:49:20 2016 kern.info kernel: [    1.290345] 8021q: 802.1Q VLAN Support v1.8
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.299399] UBI: auto-attach mtd3
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.301144] ubi0: attaching mtd3
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.486956] ubi0: scanning is finished
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.501203] ubi0: attached mtd3 (name "ubi", size 125 MiB)
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.505287] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.512128] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.518832] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.525619] ubi0: good PEBs: 1001, bad PEBs: 4, corrupted PEBs: 0
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.531711] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.538940] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1881164135
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.548076] ubi0: available PEBs: 0, total reserved PEBs: 1001, PEBs reserved for bad PEB handling: 16
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.557446] ubi0: background thread "ubi_bgt0d" started, PID 316
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.586491] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 318
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.614532] UBIFS (ubi0:0): recovery needed
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.754048] UBIFS (ubi0:0): recovery completed
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.757176] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.764469] UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.774382] UBIFS (ubi0:0): FS size: 125153280 bytes (119 MiB, 970 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.784991] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    1.790833] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 539FF09C-8309-461A-8E8D-2842CD906CAB, small LPT model
Tue Nov  8 23:49:20 2016 kern.info kernel: [    1.802384] VFS: Mounted root (ubifs filesystem) on device 0:11.
Tue Nov  8 23:49:20 2016 kern.info kernel: [    1.811837] Freeing unused kernel memory: 1208K (80502000 - 80630000)
Tue Nov  8 23:49:20 2016 user.info kernel: [    1.956847] init: Console is alive
Tue Nov  8 23:49:20 2016 user.info kernel: [    1.959076] init: - watchdog -
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    2.240152] SCSI subsystem initialized
Tue Nov  8 23:49:20 2016 kern.info kernel: [    2.273021] dwc2 1e101000.ifxhcd: requested GPIO 495
Tue Nov  8 23:49:20 2016 kern.warn kernel: [    2.276581] dwc2 1e101000.ifxhcd: Configuration mismatch. Forcing host mode
Tue Nov  8 23:49:20 2016 kern.info kernel: [    3.140971] dwc2 1e101000.ifxhcd: DWC OTG Controller
Tue Nov  8 23:49:20 2016 kern.info kernel: [    3.144542] dwc2 1e101000.ifxhcd: new USB bus registered, assigned bus number 1
Tue Nov  8 23:49:20 2016 kern.info kernel: [    3.151905] dwc2 1e101000.ifxhcd: irq 62, io mem 0x00000000
Tue Nov  8 23:49:20 2016 kern.err kernel: [    3.157408] dwc2 1e101000.ifxhcd: Hardware does not support descriptor DMA mode -
Tue Nov  8 23:49:20 2016 kern.err kernel: [    3.164848] dwc2 1e101000.ifxhcd: falling back to buffer DMA mode.
Tue Nov  8 23:49:20 2016 kern.info kernel: [    3.172296] hub 1-0:1.0: USB hub found
Tue Nov  8 23:49:20 2016 kern.info kernel: [    3.175256] hub 1-0:1.0: 1 port detected
Tue Nov  8 23:49:20 2016 kern.warn kernel: [    3.179347] dwc2 1e106000.ifxhcd: Configuration mismatch. Forcing host mode
Tue Nov  8 23:49:20 2016 kern.info kernel: [    4.040969] dwc2 1e106000.ifxhcd: DWC OTG Controller
Tue Nov  8 23:49:20 2016 kern.info kernel: [    4.044558] dwc2 1e106000.ifxhcd: new USB bus registered, assigned bus number 2
Tue Nov  8 23:49:20 2016 kern.info kernel: [    4.051880] dwc2 1e106000.ifxhcd: irq 91, io mem 0x00000000
Tue Nov  8 23:49:20 2016 kern.err kernel: [    4.057398] dwc2 1e106000.ifxhcd: Hardware does not support descriptor DMA mode -
Tue Nov  8 23:49:20 2016 kern.err kernel: [    4.064841] dwc2 1e106000.ifxhcd: falling back to buffer DMA mode.
Tue Nov  8 23:49:20 2016 kern.info kernel: [    4.072454] hub 2-0:1.0: USB hub found
Tue Nov  8 23:49:20 2016 kern.info kernel: [    4.075255] hub 2-0:1.0: 1 port detected
Tue Nov  8 23:49:20 2016 kern.info kernel: [    4.091739] usbcore: registered new interface driver usb-storage
Tue Nov  8 23:49:20 2016 user.info kernel: [    4.107840] init: - preinit -
Tue Nov  8 23:49:20 2016 kern.info kernel: [    4.112983] eth0: port 2 got link
Tue Nov  8 23:49:20 2016 kern.info kernel: [    4.249772] eth0: port 5 got link
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    4.332960] random: procd: uninitialized urandom read (4 bytes read, 19 bits of entropy available)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    4.363657] IPv6: eth0: IPv6 duplicate address fe80::211:22ff:fe33:4455 detected!
Tue Nov  8 23:49:20 2016 user.notice kernel: [    7.483873] mount_root: mounting /dev/root
Tue Nov  8 23:49:20 2016 user.info kernel: [    7.489168] mount_root: loading kmods from internal overlay
Tue Nov  8 23:49:20 2016 user.info kernel: [    8.096716] block: attempting to load /etc/config/fstab
Tue Nov  8 23:49:20 2016 user.info kernel: [    8.103813] block: extroot: not configured
Tue Nov  8 23:49:20 2016 user.warn kernel: [    8.110473] urandom-seed: Seeding with /etc/urandom.seed
Tue Nov  8 23:49:20 2016 user.info kernel: [    8.158208] procd: - early -
Tue Nov  8 23:49:20 2016 user.info kernel: [    8.161007] procd: - watchdog -
Tue Nov  8 23:49:20 2016 kern.info kernel: [    8.248871] eth0: port 5 lost link
Tue Nov  8 23:49:20 2016 user.info kernel: [    8.728503] procd: - ubus -
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    8.754768] random: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    8.785264] random: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    8.793393] random: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    8.801891] random: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    8.811737] random: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    8.819815] random: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    8.829091] random: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    8.838021] random: ubusd: uninitialized urandom read (4 bytes read, 38 bits of entropy available)
Tue Nov  8 23:49:20 2016 user.info kernel: [    8.847244] procd: - init -
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.112871] eth0: port 2 lost link
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.154358] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.179795] NET: Registered protocol family 8
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.182769] NET: Registered protocol family 20
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.219428] PPP generic driver version 2.4.2
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.232686] ip6_tables: (C) 2000-2006 Netfilter Core Team
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.297829] Lantiq (VRX) DSL CPE MEI driver, version 1.5.17.6, (c) 2007-2015 Lantiq Beteiligungs-GmbH & Co. KG
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.297829] 
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.297829] Lantiq CPE API Driver version: DSL CPE API V4.17.18.6
Tue Nov  8 23:49:20 2016 kern.warn kernel: [    9.356667] 
Tue Nov  8 23:49:20 2016 kern.warn kernel: [    9.356667] Predefined debug level: 3
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.372534] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.378719] Backport generated by backports.git backports-20160324-9-g0e38f5c
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.391452] ip_tables: (C) 2000-2006 Netfilter Core Team
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.405723] Infineon Technologies DEU driver version 2.0.0 
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    9.411779] IFX DEU DES initialized (multiblock).
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    9.416046] IFX DEU AES initialized (multiblock).
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    9.420186] IFX DEU ARC4 initialized (multiblock).
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    9.424856] IFX DEU SHA1 initialized.
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    9.428348] IFX DEU MD5 initialized.
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    9.432037] IFX DEU SHA1_HMAC initialized.
Tue Nov  8 23:49:20 2016 kern.notice kernel: [    9.436073] IFX DEU MD5_HMAC initialized.
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.459787] nf_conntrack version 0.5.0 (1945 buckets, 7780 max)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.487024] NET: Registered protocol family 24
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.492421] usbcore: registered new interface driver ums-alauda
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.499323] usbcore: registered new interface driver ums-cypress
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.506489] usbcore: registered new interface driver ums-datafab
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.513462] usbcore: registered new interface driver ums-freecom
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.520557] usbcore: registered new interface driver ums-isd200
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.527637] usbcore: registered new interface driver ums-jumpshot
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.534730] usbcore: registered new interface driver ums-karma
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.542169] usbcore: registered new interface driver ums-sddr09
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.549301] usbcore: registered new interface driver ums-sddr55
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.556566] usbcore: registered new interface driver ums-usbat
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.583731] xt_time: kernel timezone is -0000
Tue Nov  8 23:49:20 2016 kern.warn kernel: [    9.884308] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.888826] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT3062.eeprom'.
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.900076] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected
Tue Nov  8 23:49:20 2016 kern.info kernel: [    9.906451] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008 detected
Tue Nov  8 23:49:20 2016 kern.debug kernel: [    9.913981] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Tue Nov  8 23:49:20 2016 kern.notice kernel: [   10.487626] random: jshn: uninitialized urandom read (4 bytes read, 45 bits of entropy available)
Tue Nov  8 23:49:22 2016 user.notice : Added device handler type: 8021ad
Tue Nov  8 23:49:22 2016 user.notice : Added device handler type: 8021q
Tue Nov  8 23:49:22 2016 user.notice : Added device handler type: macvlan
Tue Nov  8 23:49:22 2016 user.notice : Added device handler type: bridge
Tue Nov  8 23:49:22 2016 user.notice : Added device handler type: Network device
Tue Nov  8 23:49:22 2016 user.notice : Added device handler type: tunnel
Tue Nov  8 23:49:24 2016 kern.info kernel: [   14.353648] PTM 1.0.27    PTM (E1) firmware version 0.30
Tue Nov  8 23:49:24 2016 kern.warn kernel: [   14.357574] ifxmips_ptm: PTM init succeed
Tue Nov  8 23:49:26 2016 authpriv.info dropbear[867]: Not backgrounding
Tue Nov  8 23:49:29 2016 kern.info kernel: [   19.147986] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Tue Nov  8 23:49:29 2016 kern.info kernel: [   19.152667] eth0: port 2 got link
Tue Nov  8 23:49:29 2016 kern.info kernel: [   19.156863] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Tue Nov  8 23:49:29 2016 kern.info kernel: [   19.190742] device eth0 entered promiscuous mode
Tue Nov  8 23:49:29 2016 kern.info kernel: [   19.215252] device eth0.2 entered promiscuous mode
Tue Nov  8 23:49:29 2016 kern.info kernel: [   19.242540] br-lan: port 1(eth0.2) entered forwarding state
Tue Nov  8 23:49:29 2016 kern.info kernel: [   19.246785] br-lan: port 1(eth0.2) entered forwarding state
Tue Nov  8 23:49:29 2016 kern.info kernel: [   19.253603] eth0: port 5 got link
Tue Nov  8 23:49:29 2016 daemon.notice netifd: Interface 'lan' is enabled
Tue Nov  8 23:49:29 2016 daemon.notice netifd: Interface 'lan' is setting up now
Tue Nov  8 23:49:29 2016 daemon.notice netifd: Interface 'lan' is now up
Tue Nov  8 23:49:29 2016 daemon.notice netifd: Interface 'loopback' is enabled
Tue Nov  8 23:49:29 2016 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Nov  8 23:49:29 2016 daemon.notice netifd: Interface 'loopback' is now up
Tue Nov  8 23:49:29 2016 daemon.notice netifd: Interface 'wan' is enabled
Tue Nov  8 23:49:29 2016 daemon.notice netifd: bridge 'br-lan' link is up
Tue Nov  8 23:49:29 2016 daemon.notice netifd: Interface 'lan' has link connectivity 
Tue Nov  8 23:49:29 2016 daemon.notice netifd: Network device 'eth0' link is up
Tue Nov  8 23:49:29 2016 daemon.notice netifd: VLAN 'eth0.2' link is up
Tue Nov  8 23:49:29 2016 daemon.notice netifd: Network device 'lo' link is up
Tue Nov  8 23:49:29 2016 daemon.notice netifd: Interface 'loopback' has link connectivity 
Tue Nov  8 23:49:29 2016 daemon.notice netifd: VLAN 'eth0.3' link is up
Tue Nov  8 23:49:29 2016 daemon.notice netifd: Interface 'wan' has link connectivity 
Tue Nov  8 23:49:29 2016 daemon.notice netifd: Interface 'wan' is setting up now
Tue Nov  8 23:49:29 2016 daemon.info privoxy[]: Scheduled startup in 10 seconds
Tue Nov  8 23:49:29 2016 user.notice : setting up led wifi
Tue Nov  8 23:49:29 2016 user.notice : setting up led usb
Tue Nov  8 23:49:30 2016 user.notice : setting up led usb2
Tue Nov  8 23:49:30 2016 daemon.notice netifd: wan (1058): udhcpc: started, v1.25.1
Tue Nov  8 23:49:30 2016 user.notice : setting up led dsl
Tue Nov  8 23:49:30 2016 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Nov  8 23:49:30 2016 user.notice : setting up led internet
Tue Nov  8 23:49:30 2016 daemon.notice netifd: wan (1058): udhcpc: sending discover
Tue Nov  8 23:49:30 2016 daemon.notice netifd: wan (1058): udhcpc: sending select for 192.168.1.106
Tue Nov  8 23:49:30 2016 daemon.notice netifd: wan (1058): udhcpc: lease of 192.168.1.106 obtained, lease time 43200
Tue Nov  8 23:49:30 2016 daemon.notice netifd: radio0 (991): command failed: Not supported (-122)
Tue Nov  8 23:49:31 2016 daemon.notice netifd: Interface 'wan' is now up
Tue Nov  8 23:49:31 2016 kern.info kernel: [   21.248826] br-lan: port 1(eth0.2) entered forwarding state
Tue Nov  8 23:49:32 2016 user.notice firewall: Reloading firewall due to ifup of wan (eth0.3)
Tue Nov  8 23:49:32 2016 daemon.notice netifd: radio0 (991): Configuration file: /var/run/hostapd-phy0.conf
Tue Nov  8 23:49:32 2016 kern.info kernel: [   22.335972] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
Tue Nov  8 23:49:32 2016 kern.info kernel: [   22.378134] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40
Tue Nov  8 23:49:32 2016 kern.info kernel: [   22.502283] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Tue Nov  8 23:49:32 2016 kern.info kernel: [   22.559662] device wlan0 entered promiscuous mode
Tue Nov  8 23:49:32 2016 daemon.notice netifd: radio0 (991): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Nov  8 23:49:32 2016 daemon.notice netifd: radio0 (991): wlan0: interface state COUNTRY_UPDATE->HT_SCAN
Tue Nov  8 23:49:32 2016 daemon.info procd: - init complete -
Tue Nov  8 23:49:33 2016 daemon.notice netifd: radio0 (991): 20/40 MHz operation not permitted on channel pri=11 sec=7 based on overlapping BSSes
Tue Nov  8 23:49:33 2016 daemon.notice netifd: radio0 (991): Using interface wlan0 with hwaddr b0:b2:dc:10:46:0c and ssid "Zy_private_C4M7FN"
Tue Nov  8 23:49:34 2016 kern.info kernel: [   24.561058] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Tue Nov  8 23:49:34 2016 kern.info kernel: [   24.566258] br-lan: port 2(wlan0) entered forwarding state
Tue Nov  8 23:49:34 2016 kern.info kernel: [   24.571591] br-lan: port 2(wlan0) entered forwarding state
Tue Nov  8 23:49:34 2016 kern.info kernel: [   24.594244] device wlan0-1 entered promiscuous mode
Tue Nov  8 23:49:34 2016 kern.info kernel: [   24.599699] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
Tue Nov  8 23:49:34 2016 kern.info kernel: [   24.604444] br-lan: port 3(wlan0-1) entered forwarding state
Tue Nov  8 23:49:34 2016 kern.info kernel: [   24.610097] br-lan: port 3(wlan0-1) entered forwarding state
Tue Nov  8 23:49:34 2016 daemon.notice netifd: radio0 (991): Using interface wlan0-1 with hwaddr b0:b2:dc:10:46:0d and ssid "OpenWrt-TOR"
Tue Nov  8 23:49:35 2016 kern.info kernel: [   25.218581] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
Tue Nov  8 23:49:35 2016 daemon.notice netifd: radio0 (991): wlan0: interface state HT_SCAN->ENABLED
Tue Nov  8 23:49:35 2016 daemon.notice netifd: radio0 (991): wlan0: AP-ENABLED 
Tue Nov  8 23:49:35 2016 daemon.notice netifd: Network device 'wlan0' link is up
Tue Nov  8 23:49:35 2016 daemon.notice netifd: Network device 'wlan0-1' link is up
Wed Nov  9 10:13:37 2016 kern.info kernel: [   26.572785] br-lan: port 2(wlan0) entered forwarding state
Wed Nov  9 10:13:37 2016 kern.info kernel: [   26.612832] br-lan: port 3(wlan0-1) entered forwarding state
Wed Nov  9 10:13:37 2016 daemon.info dnsmasq[1322]: started, version 2.76 DNS disabled
Wed Nov  9 10:13:37 2016 daemon.info dnsmasq[1322]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Wed Nov  9 10:13:37 2016 daemon.info dnsmasq[1322]: DNS service limited to local subnets
Wed Nov  9 10:13:37 2016 daemon.info dnsmasq-dhcp[1322]: DHCP, IP range 192.168.100.100 -- 192.168.100.149, lease time 12h
Wed Nov  9 10:13:37 2016 daemon.info dnsmasq-dhcp[1322]: read /etc/ethers - 0 addresses
Wed Nov  9 10:13:37 2016 daemon.info dnsmasq-dhcp[1322]: read /etc/ethers - 0 addresses
Wed Nov  9 10:13:38 2016 kern.notice kernel: [   28.196831] random: nonblocking pool is initialized
Wed Nov  9 10:13:40 2016 daemon.info dnsmasq-dhcp[1322]: DHCPDISCOVER(br-lan) 192.168.100.131 00:24:7e:df:d3:79 
Wed Nov  9 10:13:40 2016 daemon.info dnsmasq-dhcp[1322]: DHCPOFFER(br-lan) 192.168.100.131 00:24:7e:df:d3:79 
Wed Nov  9 10:13:40 2016 daemon.info dnsmasq-dhcp[1322]: DHCPREQUEST(br-lan) 192.168.100.131 00:24:7e:df:d3:79 
Wed Nov  9 10:13:40 2016 daemon.info dnsmasq-dhcp[1322]: DHCPACK(br-lan) 192.168.100.131 00:24:7e:df:d3:79 R8CNXEV-6474EC3
Wed Nov  9 10:13:42 2016 daemon.notice privoxy[1472]: Started successfully
Wed Nov  9 10:14:09 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: authenticated
Wed Nov  9 10:14:09 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: associated (aid 1)
Wed Nov  9 10:14:09 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: pairwise key handshake completed (RSN)
Wed Nov  9 10:14:13 2016 daemon.info dnsmasq-dhcp[1322]: DHCPDISCOVER(br-lan) 00:26:c6:33:cb:82 
Wed Nov  9 10:14:13 2016 daemon.info dnsmasq-dhcp[1322]: DHCPOFFER(br-lan) 192.168.100.100 00:26:c6:33:cb:82 
Wed Nov  9 10:14:13 2016 daemon.info dnsmasq-dhcp[1322]: DHCPREQUEST(br-lan) 192.168.100.100 00:26:c6:33:cb:82 
Wed Nov  9 10:14:13 2016 daemon.info dnsmasq-dhcp[1322]: DHCPACK(br-lan) 192.168.100.100 00:26:c6:33:cb:82 R8CNXEV-6474EC3
Wed Nov  9 10:15:24 2016 daemon.info dnsmasq-dhcp[1322]: DHCPINFORM(br-lan) 192.168.100.100 00:26:c6:33:cb:82 
Wed Nov  9 10:15:24 2016 daemon.info dnsmasq-dhcp[1322]: DHCPACK(br-lan) 192.168.100.100 00:26:c6:33:cb:82 R8CNXEV-6474EC3
Wed Nov  9 10:15:24 2016 daemon.info dnsmasq-dhcp[1322]: DHCPINFORM(br-lan) 192.168.100.131 00:24:7e:df:d3:79 
Wed Nov  9 10:15:24 2016 daemon.info dnsmasq-dhcp[1322]: DHCPACK(br-lan) 192.168.100.131 00:24:7e:df:d3:79 R8CNXEV-6474EC3
Wed Nov  9 10:23:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 10:33:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 10:43:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 10:53:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 11:03:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:20 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:21 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:21 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:21 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:21 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:21 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:21 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:21 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:21 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:21 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:21 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:21 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:21 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:21 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:21 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:06:21 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 11:13:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 11:23:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 11:33:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 11:43:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 11:53:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 12:03:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 12:13:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 12:23:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 12:33:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 12:36:45 2016 kern.info kernel: [ 8613.859386] eth0: port 2 lost link
Wed Nov  9 12:43:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 12:53:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 13:03:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 13:13:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 13:23:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 13:33:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 13:43:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 13:53:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 14:03:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 14:13:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 14:23:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 14:33:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 14:43:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 14:53:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 15:03:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 15:13:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 15:15:53 2016 daemon.info dnsmasq-dhcp[1322]: DHCPINFORM(br-lan) 192.168.100.100 00:26:c6:33:cb:82 
Wed Nov  9 15:15:53 2016 daemon.info dnsmasq-dhcp[1322]: DHCPACK(br-lan) 192.168.100.100 00:26:c6:33:cb:82 R8CNXEV-6474EC3
Wed Nov  9 15:23:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 15:33:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 15:41:33 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:33 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:33 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:33 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:33 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:33 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:34 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:35 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:35 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:35 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:35 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:35 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:35 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:35 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:35 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:35 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:35 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:35 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:35 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:35 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:35 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:41:35 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 15:43:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 15:53:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 16:03:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 16:13:30 2016 daemon.notice netifd: wan (1058): udhcpc: sending renew
Wed Nov  9 16:13:30 2016 daemon.notice netifd: wan (1058): udhcpc: lease of 192.168.1.106 obtained, lease time 43200
Wed Nov  9 16:13:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 16:14:12 2016 daemon.info dnsmasq-dhcp[1322]: DHCPREQUEST(br-lan) 192.168.100.100 00:26:c6:33:cb:82 
Wed Nov  9 16:14:12 2016 daemon.info dnsmasq-dhcp[1322]: DHCPACK(br-lan) 192.168.100.100 00:26:c6:33:cb:82 R8CNXEV-6474EC3
Wed Nov  9 16:23:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 16:33:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 16:43:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 16:53:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 16:59:51 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: authenticated
Wed Nov  9 16:59:51 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: associated (aid 1)
Wed Nov  9 16:59:51 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: pairwise key handshake completed (RSN)
Wed Nov  9 17:03:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 17:13:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 17:23:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 17:23:36 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: authenticated
Wed Nov  9 17:23:36 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: associated (aid 1)
Wed Nov  9 17:23:36 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: pairwise key handshake completed (RSN)
Wed Nov  9 17:23:37 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: authenticated
Wed Nov  9 17:23:37 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: associated (aid 1)
Wed Nov  9 17:23:37 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: pairwise key handshake completed (RSN)
Wed Nov  9 17:23:39 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: authenticated
Wed Nov  9 17:23:39 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: associated (aid 1)
Wed Nov  9 17:23:39 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: pairwise key handshake completed (RSN)
Wed Nov  9 17:23:43 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: authenticated
Wed Nov  9 17:23:43 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: associated (aid 1)
Wed Nov  9 17:23:43 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: pairwise key handshake completed (RSN)
Wed Nov  9 17:23:44 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: authenticated
Wed Nov  9 17:23:44 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: associated (aid 1)
Wed Nov  9 17:23:44 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: pairwise key handshake completed (RSN)
Wed Nov  9 17:23:46 2016 daemon.info dnsmasq-dhcp[1322]: DHCPREQUEST(br-lan) 192.168.100.100 00:26:c6:33:cb:82 
Wed Nov  9 17:23:46 2016 daemon.info dnsmasq-dhcp[1322]: DHCPACK(br-lan) 192.168.100.100 00:26:c6:33:cb:82 R8CNXEV-6474EC3
Wed Nov  9 17:23:51 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: authenticated
Wed Nov  9 17:23:51 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: associated (aid 1)
Wed Nov  9 17:23:51 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: pairwise key handshake completed (RSN)
Wed Nov  9 17:23:53 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: authenticated
Wed Nov  9 17:23:53 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: associated (aid 1)
Wed Nov  9 17:23:53 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: pairwise key handshake completed (RSN)
Wed Nov  9 17:26:59 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: authenticated
Wed Nov  9 17:26:59 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: associated (aid 1)
Wed Nov  9 17:26:59 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: pairwise key handshake completed (RSN)
Wed Nov  9 17:33:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 17:43:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 17:53:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 18:03:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 18:13:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 18:23:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 18:33:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 18:43:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 18:53:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 19:03:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 19:13:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 19:23:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 19:33:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 19:43:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 19:53:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 20:03:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 20:13:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 20:16:21 2016 daemon.info dnsmasq-dhcp[1322]: DHCPINFORM(br-lan) 192.168.100.100 00:26:c6:33:cb:82 
Wed Nov  9 20:16:21 2016 daemon.info dnsmasq-dhcp[1322]: DHCPACK(br-lan) 192.168.100.100 00:26:c6:33:cb:82 R8CNXEV-6474EC3
Wed Nov  9 20:23:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 20:33:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 20:43:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 20:51:05 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: authenticated
Wed Nov  9 20:51:05 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 IEEE 802.11: associated (aid 1)
Wed Nov  9 20:51:05 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: pairwise key handshake completed (RSN)
Wed Nov  9 20:53:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 21:03:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 21:07:29 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:07:29 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:07:29 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:07:48 2016 authpriv.info dropbear[21080]: Child connection from 192.168.1.115:61240
Wed Nov  9 21:07:59 2016 authpriv.notice dropbear[21080]: Password auth succeeded for 'root' from 192.168.1.115:61240
Wed Nov  9 21:13:36 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:18:44 2016 daemon.err uhttpd[910]: sh: write error: Broken pipe
Wed Nov  9 21:23:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 21:33:36 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
Wed Nov  9 21:43:35 2016 daemon.info hostapd: wlan0: STA 00:26:c6:33:cb:82 WPA: group key handshake completed (RSN)
DG.
admin
Site Admin
Posts: 473
Joined: 06 Feb 2007, 13:36

Re: LEDE OpenWrt on ZyXEL

Post by admin »

After this reboot the box is really quieter!

Image

And is still working after 20 hours of service.
Looking great!

DG.
admin
Site Admin
Posts: 473
Joined: 06 Feb 2007, 13:36

Re: LEDE OpenWrt on ZyXEL with TOR & Privoxy.

Post by admin »

Lede OpenWrt r2144

Code: Select all

Hostname		     lede
Model			     P2812HNUF1 - ZyXEL P-2812HNU-F1
Firmware Version	LEDE Reboot r2144 / LuCI Master (git-16.313.38580-3936e79)
Kernel Version	  4.4.30
New build, making default config files 4 different functionality.
Box firmware has following (extra) options:
  • TOR (+geoip)
  • Privoxy
  • nano (text editor)
  • htop (monitoring tool)
  • adjusted RT3062.eeprom file, according MAC address on the box (same MAC range as programmed direct after flash)
  • 192.168.100.1 as LAN & WLAN default IP address (also used by Privoxy & Tor configuration)
    DHCP serves 50 addresses (192.168.100.100 - 192.168.100.150)
Making use of vlans, it's even possible to program all ethernet ports differently. This is NOT used here.
Only WAN is differentiated from LAN ports by vlans (swconfig).
Image
NEVER ever disable vlan functionality, it will break your WAN & LAN settings (only WiFi is then available..)

Already working OpenWrt versions on the ZyXEL P-2812HNU(L)-F1 should be able to update to this version by WEB GUI, use System, Backup / Flash Firmware to upload file: Packages used in latest version 004:

Code: Select all

atm-esi - 2.5.2-5
base-files - 170-r2144
block-mount - 2016-09-31-94a5b0ad8d53f024f036c3526b48c34ebbd66a2f
br2684ctl - 2.5.2-5
bspatch - 4.3-1
busybox - 1.25.1-2
collectd - 5.5.2-3
collectd-mod-cpu - 5.5.2-3
collectd-mod-interface - 5.5.2-3
collectd-mod-iwinfo - 5.5.2-3
collectd-mod-load - 5.5.2-3
collectd-mod-memory - 5.5.2-3
collectd-mod-network - 5.5.2-3
collectd-mod-rrdtool - 5.5.2-3
dnsmasq - 2.76-5
dosfstools - 4.0-2
dropbear - 2016.74-1
dsl-vrx200-firmware-xdsl-a - 05.08.01.08.01.06_05.08.00.0B.01.01_osc-1
dsl-vrx200-firmware-xdsl-b-patch - 05.08.01.08.01.06_05.08.00.0B.01.01_osc-1
e2fsprogs - 1.43.3-1
firewall - 2016-11-07
fstools - 2016-09-31-94a5b0ad8d53f024f036c3526b48c34ebbd66a2f
hostapd-common - 2016-09-05-1
htop - 2.0.2-1
ip6tables - 1.4.21-2
iptables - 1.4.21-2
iw - 4.3-1
jshn - 2016-07-29-290c64ef5b5c3e75be851594f269d6a9568e64e5
jsonfilter - 2016-07-02-dea067ad67d977c247c300c06676a06adf21e0c7
kernel - 4.4.30-1-c04a1cb2800304d125b59409469f8b8f
kmod-atm - 4.4.30-1
kmod-cfg80211 - 4.4.30+2016-10-08-1
kmod-crypto-aead - 4.4.30-1
kmod-crypto-crc32c - 4.4.30-1
kmod-crypto-hash - 4.4.30-1
kmod-crypto-manager - 4.4.30-1
kmod-crypto-null - 4.4.30-1
kmod-crypto-pcompress - 4.4.30-1
kmod-eeprom-93cx6 - 4.4.30-1
kmod-fs-ext4 - 4.4.30-1
kmod-fs-vfat - 4.4.30-1
kmod-gpio-button-hotplug - 4.4.30-2
kmod-ip6tables - 4.4.30-1
kmod-ipt-conntrack - 4.4.30-1
kmod-ipt-core - 4.4.30-1
kmod-ipt-nat - 4.4.30-1
kmod-leds-gpio - 4.4.30-1
kmod-lib-crc-ccitt - 4.4.30-1
kmod-lib-crc-itu-t - 4.4.30-1
kmod-lib-crc16 - 4.4.30-1
kmod-ltq-atm-vr9 - 4.4.30-1
kmod-ltq-deu-vr9 - 4.4.30-1
kmod-ltq-ifxos - 4.4.30+1.5.19-2
kmod-ltq-ptm-vr9 - 4.4.30-1
kmod-ltq-vdsl-vr9 - 4.4.30+4.17.18.6-1
kmod-ltq-vdsl-vr9-mei - 4.4.30+1.5.17.6-1
kmod-mac80211 - 4.4.30+2016-10-08-1
kmod-nf-conntrack - 4.4.30-1
kmod-nf-conntrack6 - 4.4.30-1
kmod-nf-ipt - 4.4.30-1
kmod-nf-ipt6 - 4.4.30-1
kmod-nf-nat - 4.4.30-1
kmod-nls-base - 4.4.30-1
kmod-nls-cp437 - 4.4.30-1
kmod-nls-iso8859-1 - 4.4.30-1
kmod-nls-utf8 - 4.4.30-1
kmod-ppp - 4.4.30-1
kmod-pppoa - 4.4.30-1
kmod-pppoe - 4.4.30-1
kmod-pppox - 4.4.30-1
kmod-rt2800-lib - 4.4.30+2016-10-08-1
kmod-rt2800-mmio - 4.4.30+2016-10-08-1
kmod-rt2800-pci - 4.4.30+2016-10-08-1
kmod-rt2x00-lib - 4.4.30+2016-10-08-1
kmod-rt2x00-mmio - 4.4.30+2016-10-08-1
kmod-rt2x00-pci - 4.4.30+2016-10-08-1
kmod-scsi-core - 4.4.30-1
kmod-slhc - 4.4.30-1
kmod-usb-core - 4.4.30-1
kmod-usb-dwc2 - 4.4.30-1
kmod-usb-ledtrig-usbport - 4.4.30-1
kmod-usb-storage - 4.4.30-1
kmod-usb-storage-extras - 4.4.30-1
kmod-usb2 - 4.4.30-1
lede-keyring - 2016-04-30-5c7857eed3fa06a9005f96b9b029388c7f316e83
libblkid - 2.28-1
libblobmsg-json - 2016-07-29-290c64ef5b5c3e75be851594f269d6a9568e64e5
libbz2 - 1.0.6-2
libc - 1.1.15-1
libcap - 2.24-1
libevent2 - 2.0.22-1
libext2fs - 1.43.3-1
libgcc - 5.4.0-1
libip4tc - 1.4.21-2
libip6tc - 1.4.21-2
libiwinfo - 2016-09-21-fd9e17be0c43bd6b8df5371f0b353747bc563874
libiwinfo-lua - 2016-09-21-fd9e17be0c43bd6b8df5371f0b353747bc563874
libjson-c - 0.12.1-1
libjson-script - 2016-07-29-290c64ef5b5c3e75be851594f269d6a9568e64e5
libkmod - 20-1
libltdl - 2.4-1
liblua - 5.1.5-1
libmount - 2.28-1
libncursesw - 5.9-4
libnl-tiny - 0.1-5
libopenssl - 1.0.2j-1
libpcre - 8.39-1
libpthread - 1.1.15-1
librrd1 - 1.0.50-2
librt - 1.1.15-1
libsmartcols - 2.28-1
libubox - 2016-07-29-290c64ef5b5c3e75be851594f269d6a9568e64e5
libubus - 2016-10-12-312448a5b147c221836827a7a641e76a4514db44
libubus-lua - 2016-10-12-312448a5b147c221836827a7a641e76a4514db44
libuci - 2016-07-04.1-1
libuci-lua - 2016-07-04.1-1
libuclient - 2016-07-30-ccb314db2e99463de15eed9d7626360d82aec4d2
libusb-1.0 - 1.0.20-1
libuuid - 2.28-1
libxtables - 1.4.21-2
linux-atm - 2.5.2-5
ltq-vdsl-app - 4.17.18.6-1
lua - 5.1.5-1
luci - git-16.313.38580-3936e79-1
luci-app-firewall - git-16.313.38580-3936e79-1
luci-app-privoxy - 1.0.6-1
luci-app-statistics - git-16.313.38580-3936e79-1
luci-base - git-16.313.38580-3936e79-1
luci-lib-ip - git-16.313.38580-3936e79-1
luci-lib-jsonc - git-16.313.38580-3936e79-1
luci-lib-nixio - git-16.313.38580-3936e79-1
luci-mod-admin-full - git-16.313.38580-3936e79-1
luci-proto-ipv6 - git-16.313.38580-3936e79-1
luci-proto-ppp - git-16.313.38580-3936e79-1
luci-theme-bootstrap - git-16.313.38580-3936e79-1
mount-utils - 2.28-1
mtd - 21
nano - 2.7.0-1
netifd - 2016-10-27-1615fc93b878eb28af434a7093631109197c7197
odhcp6c - 2016-06-30-7533a6243dc3ac5a747cf6ccbc4d0539dafd3e07
odhcpd - 2016-09-22-6292fcd5c2b73cdc3cbc8942672cf7a4173354b1
opkg - 9c97d5ecd795709c8584e972bfdf3aee3a5b846d-13
pciutils - 3.5.2-1
ppp - 2.4.7-10
ppp-mod-pppoa - 2.4.7-10
ppp-mod-pppoe - 2.4.7-10
privoxy - 3.0.26-2
procd - 2016-10-19-d80aaf4dc5ab00d65c0ae40dd7d6006155caa33b
procd-nand - 2016-10-19-d80aaf4dc5ab00d65c0ae40dd7d6006155caa33b
rpcd - 2016-06-30-23417e94d25570e6d62542bac46edd51e8e0243a
rrdtool1 - 1.0.50-2
rt2800-pci-firmware - 2016-09-21-42ad5367dd38371b2a1bb263b6efa85f9b92fc93-1
swconfig - 11
terminfo - 5.9-4
tor - 0.2.8.9-1
tor-geoip - 0.2.8.9-1
ubi-utils - 1.5.2-1
ubox - 2016-08-17-34c597b8f478a4937fa041bf9da988990314ea85
ubus - 2016-10-12-312448a5b147c221836827a7a641e76a4514db44
ubusd - 2016-10-12-312448a5b147c221836827a7a641e76a4514db44
uci - 2016-07-04.1-1
uclient-fetch - 2016-07-30-ccb314db2e99463de15eed9d7626360d82aec4d2
uhttpd - 2016-10-25-1628fa4b34aa143187353f81e8001b9a15286bda
uhttpd-mod-ubus - 2016-10-25-1628fa4b34aa143187353f81e8001b9a15286bda
usbutils - 007-5
usign - 2015-07-04-ef6419142a3b0fbcddcccf536e3c1880302c6f89
wpad-mini - 2016-09-05-1
zlib - 1.2.8-1
You could test with your current configuration, but as the firmware image contains TOR, it's geoip and maybe other packages not used before, configuration settings are essential.
These can be found below. [Not yet available ..]
Make notice of your settings and try to combine them with one of the following configuration files:
  • Default OFF configuration, NO proxy, NO tor. (DNS is passed through!!)
  • Default ON configuration, Privoxy & TOR. (no DNS 4 all clients!)
    More configuration options will follow, if needed (for example: WLAN repeater setup with Privoxy & TOR)
All clients however still needs some proxy adjustment before all is working.
Make sure you set your browsers network settings according the picture below:
Image
192.168.100.1 with port 8118 for regular & https websites (first 2 items)
port 9050 is used for socks v5 pass-through.
At least fill under 'Exceptions' the ip address of the router itself (192.168.100.1), otherwise the web-interface won't work in LAN.

Within a terminal session to the box, just after boot up.
The following command will tell if TOR is finished startup:

Code: Select all

tail -f /var/log/tor/notices.log
If you see something like: Tor has successfully opened a circuit. Looks like client functionality is working.
Followed by: Bootstrapped 100%: Done
Tor is configured and working.
Newer versions have a command on the web GUI (System / Custom Commands) to check this notices.log file.

After these settings & about 2-5 minutes wait for the box to connect to the TOR network your 'look alike' IP can be checked.
Several sites deliver 'your' IP, like: And they all should return NOT your real ISP IP address.

DG.
Post Reply