Build openWRT for P-2812HNU-F1 -DG13-
Posted: 09 Feb 2015, 02:34
For device: P-2812HNU-F1
Building OS: Linux Debian Jessie 8.0
Version: r? -DG13-
Plan start: 9 feb 2015
--
We start with 'nothing', from scratch!
I used mainly this OpenWrt wiki page:
http://wiki.openwrt.org/doc/howto/buildroot.exigence
Linux pre-install
Make sure your linux version has the following packages installed:
# thanks aam 4 the last 2 packages
Use 'apt-show-versions |grep {package}' to check the packages.
OpenWrt first build:
And below here, most stuff is from oxo @ forum page:
https://forum.openwrt.org/viewtopic.php?id=53511
Perform next commands:
You must select a target before "make defconfig" or default broadcom is selected:
https://forum.openwrt.org/viewtopic.php ... 70#p140470
Only use this the FIRST time your build a firmware package.
Updates can be made with the same package and take only 10 minutes to build new one,
NOT if you re-run this 'echo CONFIG_TARGET_lantiq=y > .config' command!
echo CONFIG_TARGET_lantiq=y > .config
# ONLY ONES #
- To check (14): Do we need another 'lantiq'? -> echo CONFIG_TARGET_lantiq_xrx200=y > .config
OpenWrt Re-build / Update:
Perform commands (from the right 'path'):
Within Menuconfig you make your selections:
Just to make sure SED is not active:
https://dev.openwrt.org/ticket/10612
Now we get building the image...
This will build your firmware package, and can take some time, especially the first run.
Within 'bin/lantiq/' you will find needed firmware files to flash earlier OpenWrt versions.
Or debrick a ZyXEL firmware running box to run OpenWrt:
http://wiki.openwrt.org/toh/zyxel/p2812hnu-f1
On error:
When receiving an error during this run, 'make V=s' should be run to determine what causes this error.
This is also written on screen, if there is an error.
Reading https://forum.openwrt.org/viewtopic.php?id=53511 and you can also update your current OpenWrt build-environment.
(Some) Packages that seems to be uninstallable by the WEB GUI, return a kernel error, means in most cases that you have to rebuild your firmware package and INCLUDE the missing package in the build-process.
-----
To check within & during new build:
+ LUCI should be set default, check and select if not, default its OFF!
+ Some other packages, like USB drive support are default DISABLED.
-----
TODO:
- Create nandtpl images.
- remove 'MAC Device Info Overrides' from luci-menu (not working, no support).
- Change MAC in RT3062.eeprom offset 4 (files/lib/firmware/):
https://forum.openwrt.org/viewtopic.php ... 45#p264645
8 feb 2015
Updates / changes:
+ = installed
t = testing
- = removed
feb 2015:
new (testing):
t) Different DSL, atm -> ptm:
https://forum.openwrt.org/viewtopic.php ... 08#p264708
9 feb 2015
- kmod-ltq-ptm-vr9 instead of: kmod-ltq-atm-vr9
-DG13- 9 feb 2015 OpenWrt Chaos Calmer r?
-New build, with:
-------------------------------------------------------------------------------
+ Privoxy 3.0.23-1 & luci-app-privoxy 1.0.2-0
+ luci-app-statistics
+ USB memory drive support
t 'kmod-ltq-ptm-vr9' instead of 'kmod-ltq-atm-vr9'
- Removed: 'MAC Device Info Overrides' from luci-menu (not working, no support)
- Removed: Dynamic DNS
- p910nd - Printer server
- (SIP) Devices on Network
- Removed: kmod-scsi-core - 3.14.30-1
-DG12- 7 feb 2015 OpenWrt Chaos Calmer r44257
-Re-build, including:
-------------------------------------------------------------------------------
+ Privoxy 3.0.23-1 & luci-app-privoxy 1.0.2-0
t luci-app-statistics
t USB memory drive support
t Dynamic DNS
t p910nd - Printer server
t (SIP) Devices on Network
-DG11a- 5 feb 2015 OpenWrt Chaos Calmer r44257
-Re-build, including:
-------------------------------------------------------------------------------
+Privoxy 3.0.23-1 & luci-app-privoxy 1.0.2-0
t luci-app-statistics
t USB memory drive support
-DG09- 3 feb 2015 (23:06) OpenWrt Chaos Calmer r
-Re-build, including:
-------------------------------------------------------------------------------
-DG08- 3 feb 2015 (01:32) OpenWrt Chaos Calmer r
-Re-build, including:
-------------------------------------------------------------------------------
-DG07- 2 feb 2015 OpenWrt Chaos Calmer r
-Re-build, including:
-------------------------------------------------------------------------------
-DG06- 1 feb 2015 (21:49) OpenWrt Chaos Calmer r
-Re-build, including:
-------------------------------------------------------------------------------
-DG05- 1 feb 2015 (20:59) OpenWrt Chaos Calmer r44236
-Re-build, including:
-------------------------------------------------------------------------------
-DG04- 1 feb 2015 (13:45) OpenWrt Chaos Calmer r44233
-Re-build, including:
-------------------------------------------------------------------------------
-DG03- 26 jan 2015 OpenWrt Chaos Calmer r44147
-Re-build, including:
-------------------------------------------------------------------------------
= openwrt-lantiq-xrx200-P2812HNUF1-ubifs-sysupgrade3.tar
-DG02- 25 dec 2014 (02:23) OpenWrt Chaos Calmer r4
-Re-build, including:
-------------------------------------------------------------------------------
= openwrt-lantiq-xrx200-P2812HNUF1-ubifs-sysupgrade2.tar
-DG01- 25 dec 2014 (10:51) OpenWrt Chaos Calmer r
-New build, including:
-------------------------------------------------------------------------------
= openwrt-lantiq-xrx200-P2812HNUF1-ubifs-sysupgrade.tar
(other -scapi- build)
--
Tested and installed:
1) Privoxy 3.0.23-1 & luci-app-privoxy 1.0.2-0 (not active, -DG12-)
2) luci-app-statistics git-15.037.36178-4ba597b-1
3) USB memory drive support
Building OS: Linux Debian Jessie 8.0
Version: r? -DG13-
Plan start: 9 feb 2015
--
We start with 'nothing', from scratch!
I used mainly this OpenWrt wiki page:
http://wiki.openwrt.org/doc/howto/buildroot.exigence
Linux pre-install
Make sure your linux version has the following packages installed:
Code: Select all
- (su)do apt-get install gcc
binutils
bzip2
python
perl
make
findutils # (older: find) ?
grep
diffutils # (older: diff) ?
unzip
getopt
libz-dev
git-core
libssl-dev
build-essential
subversion
libncurses5-dev
zlib1g-dev
gawk
gcc-multilib
flex
gettext
quilt
lzopUse 'apt-show-versions |grep {package}' to check the packages.
OpenWrt first build:
And below here, most stuff is from oxo @ forum page:
https://forum.openwrt.org/viewtopic.php?id=53511
Perform next commands:
Code: Select all
(su)do apt-get update
git clone git://git.openwrt.org/openwrt.git
git clone git://git.openwrt.org/packages.git
cd openwrthttps://forum.openwrt.org/viewtopic.php ... 70#p140470
Only use this the FIRST time your build a firmware package.
Updates can be made with the same package and take only 10 minutes to build new one,
NOT if you re-run this 'echo CONFIG_TARGET_lantiq=y > .config' command!
echo CONFIG_TARGET_lantiq=y > .config
# ONLY ONES #
- To check (14): Do we need another 'lantiq'? -> echo CONFIG_TARGET_lantiq_xrx200=y > .config
OpenWrt Re-build / Update:
Perform commands (from the right 'path'):
Code: Select all
git pull
./scripts/feeds update -a
./scripts/feeds install -a
make defconfig
make prereq
make menuconfig- Target System: Lantiq
- Subtarget: XRX200
- Target Profile: ZyXEL P-2812HNU-F1
- Bootloaders: both
Just to make sure SED is not active:
https://dev.openwrt.org/ticket/10612
Code: Select all
unset SEDCode: Select all
makeWithin 'bin/lantiq/' you will find needed firmware files to flash earlier OpenWrt versions.
Or debrick a ZyXEL firmware running box to run OpenWrt:
http://wiki.openwrt.org/toh/zyxel/p2812hnu-f1
On error:
When receiving an error during this run, 'make V=s' should be run to determine what causes this error.
This is also written on screen, if there is an error.
Reading https://forum.openwrt.org/viewtopic.php?id=53511 and you can also update your current OpenWrt build-environment.
(Some) Packages that seems to be uninstallable by the WEB GUI, return a kernel error, means in most cases that you have to rebuild your firmware package and INCLUDE the missing package in the build-process.
-----
To check within & during new build:
+ LUCI should be set default, check and select if not, default its OFF!
+ Some other packages, like USB drive support are default DISABLED.
-----
TODO:
- Create nandtpl images.
- remove 'MAC Device Info Overrides' from luci-menu (not working, no support).
- Change MAC in RT3062.eeprom offset 4 (files/lib/firmware/):
https://forum.openwrt.org/viewtopic.php ... 45#p264645
8 feb 2015
Updates / changes:
+ = installed
t = testing
- = removed
feb 2015:
new (testing):
t) Different DSL, atm -> ptm:
https://forum.openwrt.org/viewtopic.php ... 08#p264708
9 feb 2015
- kmod-ltq-ptm-vr9 instead of: kmod-ltq-atm-vr9
-DG13- 9 feb 2015 OpenWrt Chaos Calmer r?
-New build, with:
-------------------------------------------------------------------------------
+ Privoxy 3.0.23-1 & luci-app-privoxy 1.0.2-0
+ luci-app-statistics
+ USB memory drive support
t 'kmod-ltq-ptm-vr9' instead of 'kmod-ltq-atm-vr9'
- Removed: 'MAC Device Info Overrides' from luci-menu (not working, no support)
- Removed: Dynamic DNS
- p910nd - Printer server
- (SIP) Devices on Network
- Removed: kmod-scsi-core - 3.14.30-1
-DG12- 7 feb 2015 OpenWrt Chaos Calmer r44257
-Re-build, including:
-------------------------------------------------------------------------------
+ Privoxy 3.0.23-1 & luci-app-privoxy 1.0.2-0
t luci-app-statistics
t USB memory drive support
t Dynamic DNS
t p910nd - Printer server
t (SIP) Devices on Network
-DG11a- 5 feb 2015 OpenWrt Chaos Calmer r44257
-Re-build, including:
-------------------------------------------------------------------------------
+Privoxy 3.0.23-1 & luci-app-privoxy 1.0.2-0
t luci-app-statistics
t USB memory drive support
-DG09- 3 feb 2015 (23:06) OpenWrt Chaos Calmer r
-Re-build, including:
-------------------------------------------------------------------------------
-DG08- 3 feb 2015 (01:32) OpenWrt Chaos Calmer r
-Re-build, including:
-------------------------------------------------------------------------------
-DG07- 2 feb 2015 OpenWrt Chaos Calmer r
-Re-build, including:
-------------------------------------------------------------------------------
-DG06- 1 feb 2015 (21:49) OpenWrt Chaos Calmer r
-Re-build, including:
-------------------------------------------------------------------------------
-DG05- 1 feb 2015 (20:59) OpenWrt Chaos Calmer r44236
-Re-build, including:
-------------------------------------------------------------------------------
-DG04- 1 feb 2015 (13:45) OpenWrt Chaos Calmer r44233
-Re-build, including:
-------------------------------------------------------------------------------
-DG03- 26 jan 2015 OpenWrt Chaos Calmer r44147
-Re-build, including:
-------------------------------------------------------------------------------
= openwrt-lantiq-xrx200-P2812HNUF1-ubifs-sysupgrade3.tar
-DG02- 25 dec 2014 (02:23) OpenWrt Chaos Calmer r4
-Re-build, including:
-------------------------------------------------------------------------------
= openwrt-lantiq-xrx200-P2812HNUF1-ubifs-sysupgrade2.tar
-DG01- 25 dec 2014 (10:51) OpenWrt Chaos Calmer r
-New build, including:
-------------------------------------------------------------------------------
= openwrt-lantiq-xrx200-P2812HNUF1-ubifs-sysupgrade.tar
(other -scapi- build)
--
Tested and installed:
1) Privoxy 3.0.23-1 & luci-app-privoxy 1.0.2-0 (not active, -DG12-)
2) luci-app-statistics git-15.037.36178-4ba597b-1
3) USB memory drive support