Page 1 of 1

TorRouter v21.02.x & v22.03.x

Posted: 12 Mar 2022, 20:42
by admin
First tests are from augustus 2023 with v21.02.2
We used a Github fork to build this version.

Image

TorRouter v21.02.2 boot log:

Code: Select all

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00085
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Core 0 Frequency, 0 MHz
B -       261 - PBL, Start
B -      1339 - bootable_media_detect_entry, Start
B -      1678 - bootable_media_detect_success, Start
B -      1692 - elf_loader_entry, Start
B -      5069 - auth_hash_seg_entry, Start
B -      7213 - auth_hash_seg_exit, Start
B -    570975 - elf_segs_hash_verify_entry, Start
B -    686038 - PBL, End
B -    686062 - SBL1, Start
B -    774573 - pm_device_init, Start
D -         6 - pm_device_init, Delta
B -    776018 - boot_flash_init, Start
D -     54271 - boot_flash_init, Delta
B -    834464 - boot_config_data_table_init, Start
D -      3815 - boot_config_data_table_init, Delta - (419 Bytes)
B -    841675 - clock_init, Start
D -      7575 - clock_init, Delta
B -    853775 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
B -    857271 - sbl1_ddr_set_params, Start
B -    862265 - cpr_init, Start
D -         2 - cpr_init, Delta
B -    866653 - Pre_DDR_clock_init, Start
D -         4 - Pre_DDR_clock_init, Delta
D -     13161 - sbl1_ddr_set_params, Delta
B -    880495 - pm_driver_init, Start
D -         2 - pm_driver_init, Delta
B -    950700 - sbl1_wait_for_ddr_training, Start
D -        29 - sbl1_wait_for_ddr_training, Delta
B -    966484 - Image Load, Start
D -    142794 - QSEE Image Loaded, Delta - (286068 Bytes)
B -   1109781 - Image Load, Start
D -      1446 - SEC Image Loaded, Delta - (2048 Bytes)
B -   1119937 - Image Load, Start
D -     48085 - APPSBL Image Loaded, Delta - (88264 Bytes)
B -   1168443 - QSEE Execution, Start
D -        66 - QSEE Execution, Delta
B -   1174572 - SBL1, End
D -    490620 - SBL1, Delta
S - Flash Throughput, 1982 KB/s  (376799 Bytes,  190048 us)
S - DDR Frequency, 533 MHz

(AVM) EVA Revision: 1.3550
(C) Copyright 2005 AVM Date: Jul 25 2018 Time: 16:42:30 (0) 3 0x0-0x240D

[FLASH:] MACRONIX Uniform-Flash 32MB 256 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 512 sectors a 64kB)
[SYSTEM:] CortexA9

Eva_AVM >.....Device Tree Blob for SubRevision 4 not found.
Using Device Tree Blob of SubRevision 2


U-Boot 2012.07 [local,r11208-ce6496d796] (Sep 08 2020 - 11:39:21)

smem ram ptable found: ver: 1 len: 3
DRAM:  256 MiB
machid : 0x8010000
Maximum malloc length: 512 KBytes
mem_malloc_start/brk/end: 0x84140000/84140000/84200000
Relocation offset: 0
NAND:  SF: Detected MX25L25635E with page size 4 KiB, total 32 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x2000000
32 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
name         : offset   size
0:SBL1       : 00000000 00040000
0:MIBIB      : 00040000 00020000
0:QSEE       : 00060000 00060000
0:CDT        : 000c0000 00010000
0:DDRPARAMS  : 000d0000 00010000
0:APPSBLENV  : 000e0000 00010000
0:APPSBL     : 000f0000 00030000
machid: 8010000
Net:   Configure GPIOSRead 1024 bytes from 011dc00
maca: 2c:3a:fd:3:11:ae
macb: 2c:3a:fd:3:11:af
MAC0 addr:2c:3a:fd:3:11:ae
PHY ID1: 0x4d
PHY ID2: 0xd0b1
ipq40xx_ess_sw_init done
eth0
Hit any key to stop autoboot:  0

Loading from nand0, offset 0x2a0000
Fit image detected...
   FIT description: ARM OpenWrt FIT (Flattened Image Tree)
    Image 0 (kernel@1)
     Description:  ARM OpenWrt Linux-5.4.179
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x850000e4
     Data Size:    2805529 Bytes = 2.7 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80208000
     Entry Point:  0x80208000
     Hash algo:    crc32
     Hash value:   9580f15b
     Hash algo:    sha1
     Hash value:   49957e4e1a572539a374de682b93f70017b9b7c7
    Image 1 (fdt@1)
     Description:  ARM OpenWrt avm_fritzbox-4040 device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x852ad13c
     Data Size:    17227 Bytes = 16.8 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   5b124722
     Hash algo:    sha1
     Hash value:   6f4f5101641cbd59dd45b6308a8ba730fb23f21c
    Default Configuration: 'config@1'
    Configuration 0 (config@1)
     Description:  OpenWrt
     Kernel:       kernel@1
     FDT:          fdt@1
## Booting kernel from FIT Image at 85000000 ...
   Using 'config@1' configuration
   Trying 'kernel@1' kernel subimage
     Description:  ARM OpenWrt Linux-5.4.179
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x850000e4
     Data Size:    2805529 Bytes = 2.7 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80208000
     Entry Point:  0x80208000
     Hash algo:    crc32
     Hash value:   9580f15b
     Hash algo:    sha1
     Hash value:   49957e4e1a572539a374de682b93f70017b9b7c7
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Flattened Device Tree from FIT Image at 85000000
   Using 'config@1' configuration
   Trying 'fdt@1' FDT blob subimage
     Description:  ARM OpenWrt avm_fritzbox-4040 device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x852ad13c
     Data Size:    17227 Bytes = 16.8 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   5b124722
     Hash algo:    sha1
     Hash value:   6f4f5101641cbd59dd45b6308a8ba730fb23f21c
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x852ad13c
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 84128000, end 8412f34a ... OK
Read 1024 bytes from 011dc00
maca: 2c:3a:fd:3:11:ae
macb: 2c:3a:fd:3:11:af
Using machid 0x8010000 from environment

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.179 (torrouter@LD865) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r1649                                5-bf0c965af0)) #0 SMP Wed Feb 16 20:29:10 2022
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: AVM FRITZ!Box 4040
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] percpu: Embedded 15 pages/cpu s30092 r8192 d23156 u61440
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64448
[    0.000000] Kernel command line:
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 247604K/260096K available (5578K kernel code, 185K rwdata, 1468K rodata, 10                                24K init, 232K bss, 12492K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x2f0/0x49c with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_                                idle_ns: 440795203732 ns
[    0.000008] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
[    0.000024] Switching to timer-based delay loop, resolution 20ns
[    0.000257] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 Bo                                goMIPS (lpj=480000)
[    0.000276] pid_max: default: 32768 minimum: 301
[    0.000499] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.000518] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.001632] CPU: Testing write buffer coherency: ok
[    0.002780] Setting up static identity map for 0x80300000 - 0x80300060
[    0.002934] rcu: Hierarchical SRCU implementation.
[    0.003436] smp: Bringing up secondary CPUs ...
[    0.006828] smp: Brought up 1 node, 4 CPUs
[    0.006851] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[    0.006860] CPU: All CPU(s) started in SVC mode.
[    0.011923] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.012095] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260                                4462750000 ns
[    0.012125] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.012354] pinctrl core: initialized pinctrl subsystem
[    0.013488] NET: Registered protocol family 16
[    0.013790] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.015154] cpuidle: using governor ladder
[    0.015204] cpuidle: using governor menu
[    0.037302] cryptd: max_cpu_qlen set to 1000
[    0.041106] usbcore: registered new interface driver usbfs
[    0.041180] usbcore: registered new interface driver hub
[    0.041253] usbcore: registered new device driver usb
[    0.041305] pps_core: LinuxPPS API ver. 1 registered
[    0.041316] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linu                                x.it>
[    0.041346] PTP clock support registered
[    0.043034] clocksource: Switched to clocksource arch_sys_counter
[    0.043927] thermal_sys: Registered thermal governor 'step_wise'
[    0.044251] NET: Registered protocol family 2
[    0.044428] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.045131] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.045183] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.045228] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.045284] TCP: Hash tables configured (established 2048 bind 2048)
[    0.045414] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.045456] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.045720] NET: Registered protocol family 1
[    0.045775] PCI: CLS 0 bytes, default 64
[    0.047925] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    0.054372] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.054392] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 R                                ed Hat, Inc.
[    0.115579] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
[    0.115601] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
[    0.116389] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[    0.116494] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
[    0.116600] tcsr 1953000.ess_tcsr: setting ess interface select = 0
[    0.116707] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[    0.117058] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.117715] msm_serial 78af000.serial: msm_serial: detected port #0
[    0.117762] msm_serial 78af000.serial: uartclk = 1843200
[    0.117820] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 25, base_baud = 115200) is a MSM
[    0.117848] msm_serial: console setup on port #0
[    0.593140] printk: console [ttyMSM0] enabled
[    0.598066] msm_serial: driver initialized
[    0.607665] loop: module loaded
[    0.608784] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    0.611232] spi-nor spi0.0: mx25l25635e (32768 Kbytes)
[    0.617052] 13 fixed-partitions partitions found on MTD device spi0.0
[    0.621856] Creating 13 MTD partitions on "spi0.0":
[    0.628400] 0x000000000000-0x000000040000 : "SBL1"
[    0.634069] 0x000000040000-0x000000060000 : "MIBIB"
[    0.638799] 0x000000060000-0x0000000c0000 : "QSEE"
[    0.643633] 0x0000000c0000-0x0000000d0000 : "CDT"
[    0.648481] 0x0000000d0000-0x0000000e0000 : "DDRPARAMS"
[    0.653315] 0x0000000e0000-0x0000000f0000 : "APPSBLENV"
[    0.658263] 0x0000000f0000-0x0000003cc000 : "urlader"
[    0.663504] 0x00000011dc00-0x000000120000 : "urlader_config"
[    0.668672] 0x000000120000-0x0000001a0000 : "tffs1"
[    0.674491] 0x0000001a0000-0x000000220000 : "tffs2"
[    0.679011] 0x000000220000-0x0000002a0000 : "uboot"
[    0.683952] 0x0000002a0000-0x000001f00000 : "firmware"
[    0.689189] 2 fit-fw partitions found on MTD device firmware
[    0.693092] Creating 2 MTD partitions on "firmware":
[    0.698858] 0x000000000000-0x0000002c0000 : "kernel"
[    0.704761] 0x0000002b19b8-0x000001c60000 : "rootfs"
[    0.709607] mtd: device 13 (rootfs) set to be root filesystem
[    0.714009] 1 squashfs-split partitions found on MTD device rootfs
[    0.719346] 0x000001420000-0x000001c60000 : "rootfs_data"
[    0.726405] 0x000001f00000-0x000002000000 : "jffs2"
[    0.758132] ESS reset ok!
[    0.782427] ESS reset ok!
[    1.204558] GPIO line 409 (enable USB3 power) hogged as output/high
[    1.316998] i2c /dev entries driver
[    1.318699] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 632000 KHz
[    1.319370] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 716000 KHz
[    1.327111] sdhci: Secure Digital Host Controller Interface driver
[    1.335333] sdhci: Copyright(c) Pierre Ossman
[    1.341253] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.349126] NET: Registered protocol family 10
[    1.352743] Segment Routing with IPv6
[    1.355802] NET: Registered protocol family 17
[    1.359463] 8021q: 802.1Q VLAN Support v1.8
[    1.363800] Registering SWP/SWPB emulation handler
[    1.37749▒[    1.384233] VFS: Mounted root (squashfs filesystem) readonly on device 31:13.
[    1.385872] Freeing unused kernel memory: 1024K
[    1.436362] Run /sbin/init as init process
[    1.468161] random: fast init done
[    2.209892] init: Console is alive
[    2.210132] init: - watchdog -
[    3.506774] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.631916] dwc3-qcom 8af8800.usb3: IRQ hs_phy_irq not found
[    3.631954] dwc3-qcom 8af8800.usb3: IRQ dp_hs_phy_irq not found
[    3.636726] dwc3-qcom 8af8800.usb3: IRQ dm_hs_phy_irq not found
[    3.642292] dwc3-qcom 8af8800.usb3: IRQ ss_phy_irq not found
[    3.649975] dwc3-qcom 60f8800.usb2: IRQ hs_phy_irq not found
[    3.654142] dwc3-qcom 60f8800.usb2: IRQ dp_hs_phy_irq not found
[    3.659739] dwc3-qcom 60f8800.usb2: IRQ dm_hs_phy_irq not found
[    3.665415] dwc3-qcom 60f8800.usb2: IRQ ss_phy_irq not found
[    3.675462] dwc3 8a00000.dwc3: Failed to get clk 'ref': -2
[    3.794466] dwc3 6000000.dwc3: Failed to get clk 'ref': -2
[    3.900180] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.900340] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    3.905088] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x00000000                                02010010
[    3.912228] xhci-hcd xhci-hcd.0.auto: irq 94, io mem 0x08a00000
[    3.922476] hub 1-0:1.0: USB hub found
[    3.927512] hub 1-0:1.0: 1 port detected
[    3.931584] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.935391] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    3.940627] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    3.950857] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.955439] hub 2-0:1.0: USB hub found
[    3.963091] hub 2-0:1.0: 1 port detected
[    3.967085] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    3.970670] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    3.976220] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x00000000                                02010010
[    3.983618] xhci-hcd xhci-hcd.1.auto: irq 95, io mem 0x06000000
[    3.998258] hub 3-0:1.0: USB hub found
[    3.998819] hub 3-0:1.0: 1 port detected
[    4.002914] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    4.006748] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    4.011981] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    4.019671] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.026751] hub 4-0:1.0: USB hub found
[    4.034437] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    4.048722] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.057995] init: - preinit -
[    4.934827] crng init done
[    5.459540] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    9.758575] mount_root: loading kmods from internal overlay
[    9.769505] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    9.772373] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[   10.637344] jffs2: notice: (171) jffs2_build_xattr_subsystem: complete building xattr subsystem                                , 71 of xdatum (61 unchecked, 10 orphan) and 78 of xref (10 dead, 0 orphan) found.
[   10.639426] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   10.680331] block: extroot: not configured
[   10.855041] jffs2: notice: (169) jffs2_build_xattr_subsystem: complete building xattr subsystem                                , 71 of xdatum (61 unchecked, 10 orphan) and 78 of xref (10 dead, 0 orphan) found.
[   10.865233] mount_root: loading kmods from internal overlay
[   10.883565] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[   10.895824] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/                                *
[   12.006253] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   12.041678] block: extroot: not configured
[   12.044056] mount_root: switching to jffs2 overlay
[   12.141163] overlayfs: upper fs does not support tmpfile.
[   12.166385] urandom-seed: Seeding with /etc/urandom.seed
[   12.292051] procd: - early -
[   12.292194] procd: - watchdog -
[   12.888909] procd: - watchdog -
[   12.894215] procd: - ubus -
[   13.051584] procd: - init -
Please press Enter to activate this console.
[   14.513838] urngd: v1.0.2 started.
[   14.518032] kmodloader: loading kernel modules from /etc/modules.d/*
[   14.521846] tun: Universal TUN/TAP device driver, 1.6
[   14.534129] Loading modules backported from Linux version v5.10.85-0-ge4f2aee6612e
[   14.534169] Backport generated by backports.git v5.10.85-1-0-gf988973f
[   14.554200] xt_time: kernel timezone is -0000
[   14.597395] PPP generic driver version 2.4.2
[   14.598459] NET: Registered protocol family 24
[   15.926496] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 000                                0:0000
[   15.926546] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   15.938090] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features                                 mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpo                                ng-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ac                                k-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
[   16.034189] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:16 crc32 e2dfaa91
[   17.322205] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   17.322257] ath10k_ahb a000000.wifi: msdu-desc: 2500  skid: 32
[   17.357032] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 250                                0  sw-crypt: 0 ct-sta: 0'
[   17.358011] ath10k_ahb a000000.wifi: wmi print 'free: 53252 iram: 13432 sram: 35752'
[   17.485318] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32                                 raw 0 hwcrypto 1
[   18.482928] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 000                                0:0000
[   18.482983] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   18.495799] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features                                 mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpo                                ng-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ac                                k-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
[   18.551045] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 e2dfaa91
[   19.839718] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   19.839763] ath10k_ahb a800000.wifi: msdu-desc: 2500  skid: 32
[   19.875763] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 250                                0  sw-crypt: 0 ct-sta: 0'
[   19.876807] ath10k_ahb a800000.wifi: wmi print 'free: 53252 iram: 13432 sram: 35752'
[   20.004188] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32                                 raw 0 hwcrypto 1
[   20.129510] kmodloader: done loading kernel modules from /etc/modules.d/*
[   26.180362] br-lan: port 1(eth0) entered blocking state
[   26.180401] br-lan: port 1(eth0) entered disabled state
[   26.184870] device eth0 entered promiscuous mode
[   26.316643] ess_edma c080000.edma eth1: Link is Down
[   27.193142] br-lan: port 1(eth0) entered blocking state
[   27.193182] br-lan: port 1(eth0) entered forwarding state
[   27.197621] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   29.434720] ess_edma c080000.edma eth1: Link is Up - 1Gbps/Full - flow control rx/tx
[   29.434820] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready



BusyBox v1.33.2 (2022-02-16 20:29:10 UTC) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 TorRouter 21.02.2, r16495-bf0c965af0
 -----------------------------------------------------
root@OpenWrt:/#
Original AVM firmware boot log:

Code: Select all

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=AVM_BOOT.BF.3.1.1
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=1208
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000000
S - Core 0 Frequency, 0 MHz
B -       261 - PBL, Start
B -      1338 - bootable_media_detect_entry, Start
B -      1678 - bootable_media_detect_success, Start
B -      1692 - elf_loader_entry, Start
B -      5357 - auth_hash_seg_entry, Start
B -      7290 - auth_hash_seg_exit, Start
B -    829057 - elf_segs_hash_verify_entry, Start
B -    996282 - PBL, End
B -         0 - SBL1, Start
B -   1092933 - pm_device_init, Start
D -         6 - pm_device_init, Delta
B -   1094036 - boot_flash_init, Start
D -     52653 - boot_flash_init, Delta
B -   1151015 - boot_config_data_table_init, Start
D -      3439 - boot_config_data_table_init, Delta - (419 Bytes)
B -   1158642 - clock_init, Start
D -      7422 - clock_init, Delta
B -   1169574 - CDT version:2,Platform ID:8,Major 
B -   1170870 - sbl1_ddr_set_params, Start
B -   1175572 - cpr_init, Start
D -         3 - cpr_init, Delta
B -   1180657 - Pre_DDR_clock_init, Start
D -         4 - Pre_DDR_clock_init, Delta
D -     13026 - sbl1_ddr_set_params, Delta
B -   1194476 - pm_driver_init, Start
D -         3 - pm_driver_init, Delta
B -   1229401 - sbl1_wait_for_ddr_training, Start
D -        32 - sbl1_wait_for_ddr_training, Delta
B -   1245502 - Image Load, Start
D -    145861 - QSEE Image Loaded, Delta - (293144 Bytes)
B -   1391670 - Image Load, Start
D -      1347 - SEC Image Loaded, Delta - (2048 Bytes)
B -   1406052 - Selected TZ0: 10228 (0:QSEE)
B -   1406521 - Image Load, Start
D -     48557 - APPSBL Image Loaded, Delta - (90484 Bytes)
B -   1455375 - QSEE Execution, Start
D -        59 - QSEE Execution, Delta
B -   1461541 - SBL1, End
D -   1463565 - SBL1, Delta
S - Flash Throughput, 1993 KB/s  (386095 Bytes,  193709 us)
S - DDR Frequency, 533 MHz


(AVM) EVA Revision: 1.3243

(C) Copyright 2005 AVM Date: Dec 13 2016 Time: 16:13:32 (0) 3 0x0-0x240D

[FLASH:] MACRONIX Uniform-Flash 32MB 256 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 512 sectors a 64kB) 
[SYSTEM:] CortexA9 

Eva_AVM >.........................................................Device Tree Blob for SubRevision 4 not found.
Using Device Tree Blob of SubRevision 3 
[    0.000000][0] Booting Linux on physical CPU 0x0
[    0.000000][0] Linux version 4.4.60 (jenkins@jenkins-ci.avm.de) (gcc version 5.5.0 (Buildroot 2018.11.4-g908cf03c90) ) #1 SMP PREEMPT 2021-04-26
[    0.000000][0] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000][0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000][0] Machine model: AVM FRITZ!Box 4040
[    0.000000][0] Reserved memory: OVERLAP DETECTED!
[    0.000000][0] avm_sbl_boot_string@86FFFC00 (0x86fffc00--0x87000112) overlaps with avm_reboot_string@0x86FFFE00 (0x86fffe00--0x86ffffff)
[    0.000000][0] Memory policy: Data cache writealloc
[    0.000000][0] [fw-info] Version 07.29
[    0.000000][0] [module-mem] Use 0x80e00000-0x8102bfff (mapped at c0e00000-c102bfff) for 5 modules
[    0.000000][0] [module-mem] Using whitelist, set default strict_mode=1
[    0.000000][0] PERCPU: Embedded 12 pages/cpu @ce8dd000 s19788 r8192 d21172 u49152
[    0.000000][0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 55593
[    0.000000][0] Kernel command line: mtdram1=0x8EB00000,0x90000000 clk_ignore_unused audit=1 slub_debug=FL
[    0.000000][0] [prepare_ram_resource] entered
[    0.000000][0] [prepare_ram_resource] mtdram1 0x8eb00000-0x8fffffff
[    0.000000][0] audit: enabled (after initialization)
[    0.000000][0] setup_slub_debug: slub_debug = DEBUG_FREE STORE_USER_LITE
[    0.000000][0] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000][0] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000][0] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000][0] Memory: 206732K/224252K available (5793K kernel code, 1276K rwdata, 2028K rodata, 240K init, 2657K bss, 17520K reserved, 0K cma-reserved, 0K highmem)
[    0.000000][0] Virtual kernel memory layout:
[    0.000000][0]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000][0]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000][0]     vmalloc : 0xcf000000 - 0xff800000   ( 776 MB)
[    0.000000][0]     lowmem  : 0xc0000000 - 0xceb00000   ( 235 MB)
[    0.000000][0]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000][0]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000][0]       .text : 0xc0208000 - 0xc09ab898   (7823 kB)
[    0.000000][0]       .init : 0xc09ac000 - 0xc09e8000   ( 240 kB)
[    0.000000][0]       .data : 0xc09e8000 - 0xc0b27000   (1276 kB)
[    0.000000][0]        .bss : 0xc0b29000 - 0xc0dc170c   (2658 kB)
[    0.000000][0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000][0] Preemptible hierarchical RCU implementation.
[    0.000000][0] Build-time adjustment of leaf fanout to 32.
[    0.000000][0] NR_IRQS:16 nr_irqs:16 16
[    0.000000][0] Architected cp15 timer(s) running at 48.00MHz (virt).
[    0.000000][0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
[    0.000000][0] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
[    0.000000][0] Switching to timer-based delay loop, resolution 20ns
[    0.000302][0] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=192000)
[    0.000331][0] pid_max: default: 32768 minimum: 301
[    0.000488][0] Security Framework initialized
[    0.000524][0] AppArmor: AppArmor initialized
[    0.000620][0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000642][0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001437][0] CPU: Testing write buffer coherency: ok
[    0.001922][0] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002024][0] Setting up static identity map for 0x802082c0 - 0x80208318
[    0.036530][1] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.048563][2] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.060634][3] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.060745][0] Brought up 4 CPUs
[    0.060794][0] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[    0.060809][0] CPU: All CPU(s) started in SVC mode.
[    0.061656][0] devtmpfs: initialized
[    0.072719][0] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.073244][0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.073291][0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.073871][0] pinctrl core: initialized pinctrl subsystem
[    0.075790][0] NET: Registered protocol family 16
[    0.077521][0] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.078056][0] console [avm0] enabled
[    0.088526][0] cpuidle: using governor ladder
[    0.100548][0] cpuidle: using governor menu
[    0.100587][0] Creating Config Table
[    0.104879][0] [qcom:qtimer_ipq40xx_probe] WARNING avm,clk-rate not set in dt, using built in default
[    0.109054][0] [qcom:watchdog] wdt_ipq40xx_probe ...
[    0.116789][0] hw-breakpoint: debug architecture 0x5 unsupported.
[    0.119113][0] Read of property:soc_version_minor from node failed
[    0.119139][0] Read of property:soc_version_major from node failed
[    0.119156][0] Read of property:cpu_type from node failed
[    0.119175][0] CPU: unavail, SoC Version: 4294967295.4294967295
[    0.119333][0] <CORE> glink_init: IPC Logging Disabled
[    0.120071][0] avm_alloc_page_extension node_extension_table[0] entries=60160 (size=240640)  alloced
[    0.120112][0] [fdt_get_reserved_mem_resource] mem_count = 6; search name = "avm_reboot_string"
[    0.120138][0] Reboot Status is: Power-On 
[    0.121756][0] console [pstore0] enabled
[    0.121776][0] pstore: Registered ramoops as persistent store backend
[    0.121797][0] ramoops: attached 0x100000@0x86000000, ecc: 0/0
[    0.143696][0] SCSI subsystem initialized
[    0.144397][0] usbcore: registered new interface driver usbfs
[    0.144513][0] usbcore: registered new interface driver hub
[    0.144676][0] usbcore: registered new device driver usb
[    0.146666][0] Advanced Linux Sound Architecture Driver Initialized.
[    0.147606][0] AVM PA for Linux version 4.4.60 (jenkins@jenkins-ci.avm.de) (gcc version 5.5.0 (Buildroot 2018.11.4-g908cf03c90) ) #1 SMP PREEMPT 2021-04-26
[    0.147606][0]  (early init)
[    0.148099][0] NET: Registered protocol family 8
[    0.148129][0] NET: Registered protocol family 20
[    0.148531][0] TZ-pin nr 15 reprioritized to 60
[    0.148565][0] TZ-pin nr 36 reprioritized to 60
[    0.148659][0] TZ-pin nr 206 reprioritized to 60
[    0.148681][0] TZ-pin nr 213 reprioritized to 60
[    0.148705][0] TZ-pin nr 225 reprioritized to 60
[    0.148724][0] TZ-pin nr 226 reprioritized to 60
[    0.148744][0] TZ-pin nr 227 reprioritized to 60
[    0.148763][0] TZ-pin nr 228 reprioritized to 60
[    0.148782][0] TZ-pin nr 229 reprioritized to 60
[    0.148802][0] TZ-pin nr 230 reprioritized to 60
[    0.148821][0] TZ-pin nr 231 reprioritized to 60
[    0.148840][0] TZ-pin nr 232 reprioritized to 60
[    0.148923][0] TZ-pin nr 233 reprioritized to 60
[    0.148961][0] TZ-pin nr 269 reprioritized to 60
[    0.149366][1] [AVM_FIQ] FIQ disabled on CPU3 to install new vector!
[    0.149374][2] [AVM_FIQ] FIQ disabled on CPU1 to install new vector!
[    0.149409][0] [AVM_FIQ] FIQ disabled on CPU2 to install new vector!
[    0.149431][0] [AVM_FIQ] FIQ disabled on CPU0 to install new vector!
[    0.149449][0] [AVM_FIQ] Vector installed!
[    0.149451][0] Set FIQ handler address
[    0.149487][2] [AVM_FIQ] FIQ enabled again on CPU1!
[    0.149496][3] [AVM_FIQ] FIQ enabled again on CPU2!
[    0.149533][0] [AVM_FIQ] FIQ enabled again on CPU3!
[    0.149570][0] [AVM_FIQ] FIQ enabled again on CPU0!
[    0.149572][0] [AVM_FIQ] (Version 1.0)(TZ 10228)
[    0.149604][0] TZLOG: Buffer allocated
[    0.149738][0] clocksource: Switched to clocksource arch_sys_counter
[    0.150520][0] AppArmor: AppArmor Filesystem Enabled
[    0.153135][0] NET: Registered protocol family 2
[    0.154466][0] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.154529][0] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    0.154589][0] TCP: Hash tables configured (established 2048 bind 2048)
[    0.154675][0] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.154722][0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.155052][0] avm_pa: try to activate hw accelaration for pid 3 (ipv4) called from avm_pa_dev_pidhandle_register_with_ingress
[    0.155123][0] NET: Registered protocol family 1
[    0.155651][0] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.158084][0] audit: initializing netlink subsys (enabled)
[    0.158182][0] audit: type=2000 audit(0.155:1): initialized
[    0.186754][0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.187399][0] ANTFS Module: Version 2.46
[    0.187691][0] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZO) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.190846][0] fuse init (API version 7.23)
[    0.197435][0] Key type asymmetric registered
[    0.197478][0] Asymmetric key parser 'x509' registered
[    0.197572][0] io scheduler noop registered
[    0.197603][0] io scheduler deadline registered (default)
[    0.204718][0] glink_loopback_server_init: IPC Logging disabled
[    0.206390][0] NET: Registered protocol family 27
[    0.206423][0] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
[    0.206459][0] qmi_log_init: IPC Logging disabled
[    0.206477][0] qmi_log_init: IPC Logging disabled
[    0.206823][0] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
[    0.206942][0] tcsr 1953000.ess_tcsr: setting ess interface select = 0
[    0.207035][0] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[    0.207117][0] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[    0.207375][0] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set
[    0.208518][0] msm_serial 78af000.serial: msm_serial: detected port #0
[    0.208642][0] msm_dectuart_probe: set dectuart_port to ttyMSM0
[    0.208707][0] msm_serial 78af000.serial: uartclk = 1843200
[    0.208766][0] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 25, base_baud = 115200) is a MSM
[    0.208811][0] msm_serial: console setup on port #0
[    1.117378][0] console [ttyMSM0] enabled
[    1.122615][0] msm_serial: driver initialized
[    1.126511][0] msm_serial_hsl_init: driver initialized
[    1.131049][0] [loadcontrol] set auto - scale=1
[    1.135441] [avm] configured: watchdog event debug 
[    1.144680][0] AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0)
[    1.145051][0] [qcom:watchdog] ar7wdt_hw_init...
[    1.151748][0] [avm_request_fiq_on] Virtual IRQ numbers are not supported. Use HWIRQ (35) for requested IRQ (26)
[    1.156553][0] [register_wdt_bark_irq] watchdog as fastirq(35) on all cpus registered with its default prio
[    1.166664][0] [avm_request_fiq_on] Forcing HW-IRQ 36 instead
[    1.176150][0] [register_wdt_bark_irq] watchdog as fastirq(36) on all cpus registered with highest prio
[    1.182040][0] [avm_request_fiq_on] Forcing HW-IRQ 213 instead
[    1.191256][0] [register_secure_wdt_bark_irq] secure watchdog as fastirq(213) on all cpus registered with highest prio
[    1.197225][0] [qcom:ar7wdt_hw_init] Wdt bark time: 320000, bite time: 640000
[    1.207833][0] [qcom:ar7wdt_hw_init] Secure watchdog: bark: 20s, bite time: 40s
[    1.215256][0] Register push button event to receive the set_factory_kernel event
[    1.234215][0] AVM Simple Profiling enabled Version 3.0
[    1.234267][0] [simple-profiling]:4 performance counters implemented
[    1.238315][0] [simple-profiling]all cpus:performance-mode: round-robin
[    1.244920][0] [simple-profiling]all cpus:performance-mode: round-robin
[    1.251243][0] [simple-profiling]all cpus:performance-mode: round-robin
[    1.257835][0] [simple-profiling]all cpus:performance-mode: round-robin
[    1.265556][0] avm_net_trace: Up and running.
[    1.274411][0] loop: module loaded
[    1.276692][0] zram: Added device: zram0
[    1.279611][0] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    1.285536][0] 2 avmpart_of_nor_spi partitions found on MTD device ram-filesystem
[    1.289981][0] Creating 2 MTD partitions on "ram-filesystem":
[    1.297580][0] 0x000000000000-0x000001500000 : "rootfs_ram"
[    1.305297][0] [mtd_add_handler] rootfs_ram (/dev/mtdblock0) will be used as root device
[    1.308729][0] 0x000001500001-0x000001500000 : "kernel_ram"
[    1.317016][0] mtd: partition "kernel_ram" is out of reach -- disabled
[    1.324182][0] mtd-ram mtd-ram: registered mtd device
[    1.329251][0] m25p80 spi0.0: mx25l25635e (32768 Kbytes)
[    1.334045][0] [TFFS3_Register_Panic_CB] registering panic callback for mtd spi0.0
[    1.339881][0] [avm partparse][mtd_parser_of_nor_spi] fond_rootfs
[    1.354648][0] 5 avmpart_of_nor_spi partitions found on MTD device spi0.0
[    1.354683][0] Creating 5 MTD partitions on "spi0.0":
[    1.360455][0] 0x000000000000-0x000000120000 : "urlader"
[    1.367402][0] 0x000000120000-0x0000001a0000 : "tffs (1)"
[    1.372732][0] 0x0000001a0000-0x000000220000 : "tffs (2)"
[    1.378051][0] 0x000000220000-0x000002000000 : "rootfs_kernel_spi"
[    1.383267][0] 0x000001f00000-0x000002000000 : "jffs2"
[    1.390491][0] libphy: Fixed MDIO Bus: probed
[    1.393266][0] qca-mdio 90000.mdio: Could not find phy-reset-gpio, idx 0
[    1.397452][0] libphy: qca_mdio: probed
[    1.406515][0] qca-mdio 90000.mdio: qca-mdio driver was registered
[    1.407592][0] tun: Universal TUN/TAP device driver, 1.6
[    1.413753][0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.924611][0] i2c /dev entries driver
[    1.926862][0] sdhci: Secure Digital Host Controller Interface driver
[    1.927270][0] sdhci: Copyright(c) Pierre Ossman
[    1.933841][0] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.940996][0] AVM PA for Linux Linux version 4.4.60 (jenkins@jenkins-ci.avm.de) (gcc version 5.5.0 (Buildroot 2018.11.4-g908cf03c90) ) #1 SMP PREEMPT 2021-04-26
[    1.940996][0]  (late init)
[    1.944920][0] gre: GRE over IPv4 demultiplexor driver
[    1.963596][0] NET: Registered protocol family 10
[    1.968928][0] avm_pa: try to activate hw accelaration for pid 4 (ipv6) called from avm_pa_dev_pidhandle_register_with_ingress
[    1.971473][0] sit: IPv6 over IPv4 tunneling driver
[    1.983652][0] NET: Registered protocol family 17
[    1.987768][0] Bridge broadcast ratelimiter registered
[    1.992238][0] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.997338][0] Bridge firewalling registered
[    2.010057][0] KOAM is loaded successfully.
[    2.014616][0] l2tp_core: L2TP core driver, V2.0
[    2.018450][0] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    2.023614][0] l2tp_netlink: L2TP netlink interface
[    2.029013][0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    2.033757][0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    2.040274][0] 8021q: 802.1Q VLAN Support v1.8
[    2.047008][0] Registering SWP/SWPB emulation handler
[    2.051123][0] [fdt_get_reserved_mem_resource] mem_count = 6; search name = "avm_sbl_boot_string"
[    2.056209][0] SBL Boot Info Version 1208 Boot TZ 0 Boot Eva 0
[    2.065051] TZ0 Version 10228 
[    2.070773][0] TZ1 not verified
[    2.073895][0] EVA0 not verified
[    2.076826][0] EVA1 not verified
[    2.080473][0] [avm_request_fiq_on] Using virtual IRQ (250)
[    2.083581][0] [avm_request_fiq_on] Using virtual IRQ (251)
[    2.088867][0] [avm_request_fiq_on] Using virtual IRQ (252)
[    2.094421][0] [avm_request_fiq_on] Using virtual IRQ (253)
[    2.100150][0] fastirq_to_linux_ipi_init: successfully installed irq=254
[    2.105655][0] fastirq_to_linux_ipi_init: successfully installed irq=255
[    2.112589][0] fastirq_to_linux_ipi_init: successfully installed irq=256
[    2.119259][0] fastirq_to_linux_ipi_init: successfully installed irq=257
[    2.128518][0] Could not find Env 'kernel_args' in the device tree
[    2.132863][0] tffs: Waiting for backend to be available
[    2.138520][0] [TFFS3_Init] Called.
[    2.144007][0] [TFFS3_Init] No storage module registered, trying legacy fallback
[    2.144900][2] hctosys: unable to open rtc device (rtc0)
[    2.150183][2] clk: Not disabling unused clocks
[    2.150204][2] ALSA device list:
[    2.150211][2]   No soundcards found.
[    2.167861][0] [TFFS3_CACHE_Configure] Setting up caching for backend legacy
[    2.171396][0] [TFFS3-CACHE] Caching module for TFFS 3.x
[    2.178515][0] [TFFS3_LGCY_Setup] using mtd3(tffs (1)), mtd4(tffs (2))
[    2.180867][2] VFS: Mounted root (squashfs filesystem) readonly on device 31:0.
[    2.182878][2] devtmpfs: mounted
[    2.183698][2] Freeing unused kernel memory: 240K (c09ac000 - c09e8000)
[    2.200996][0] [TFFS3_LGCY_Setup] mtd "tffs (1)": segment value 344
[    2.207298][0] [TFFS3_LGCY_Setup] mtd "tffs (2)": segment value 343
[    2.213446][0] [TFFS3_LGCY_Setup] Using segment 344 (avail: 344 + 343)
[    2.219681][0] [TFFS3_LGCY_Setup] mtd3 size=0x80000
[    2.226495][0] TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 3.0)
[    2.231145][0] Adam2 environment variables API installed.

starting pid 96, tty '/dev/ttyMSM0': '/etc/boot.d/1'
modprobe: module hui not found in modules.dep
[    2.795118][3] led_module: module license '
[    2.795118][3] (C) Copyright 2012 by AVM
[    2.795118][3] ' taints kernel.
[    2.795191][3] Disabling lock debugging due to kernel taint
[    2.808547][3] [LED] use GPIO 205 for 'gpio_avm_led_power'
[    2.810845][3] [LED] use GPIO 202 for 'gpio_avm_led_wan'
[    2.816323][3] [LED] use GPIO 200 for 'gpio_avm_led_wlan'
[    2.821792][3] [LED] use GPIO 206 for 'gpio_avm_led_lan_all'
[    2.827082][3] [LED] use GPIO 207 for 'gpio_avm_led_info'
[    2.832811][3] [LED] use GPIO 201 for 'gpio_avm_led_info_red'
[    2.838151][3] [BUTTON] use GPIO 58 for 'gpio_avm_button_wlan'
[    2.843930][3] [BUTTON] use GPIO 63 for 'gpio_avm_button_wlan_wps'
[    2.849609][3] [button_init] name button_both, virtual multipush button
[    2.855894][3] [avm_connect][state_machine_init] starting event worker thread
[    2.862660][3] led_module: Waiting for event system to be ready...
[    2.911756][0] [TFFS_Cache] Allocate segement buffer cache (size=32784)
[    2.912749][0] TFFS Name Table N
[Supervisor] Info: start disable_ipv6.service
[Supervisor] Info: start tffs.service
[Supervisor] Info: disable_ipv6.service exit success
Jan  1 00:00:03 ar7cfgctl[178]: load_config(ar7): open problem - factory default loaded

Jan  1 00:00:03 ar7cfgctl[184]: load_config(ar7): open problem - factory default loaded


Please press Enter to activate this console. P-Defaults: do nothing
[Supervisor] Info: tffs.service exit success
[Supervisor] Info: start untrustedd.service
00000004.580207 01.01.70/00:00:04 untrusted_api.c:183 Database is empty.
[Supervisor] Info: start rekey.service
firmwarecfg config_rekey: nop
[Supervisor] Info: rekey.service exit success
[Supervisor] Info: start environment.service
[Supervisor] Info: environment.service exit success
[Supervisor] Info: start cortexa9.service
SBL ACK done
[TZ-Update]
mount: mounting proc on /proc failed: Device or resource busy
Found mibib @ page 262144
1 TZs stored, updating index 0 first
[/usr/sbin/tz_update] TZ0 already up to date Version 10228
... tz not updated
[Supervisor] Info: cortexa9.service exit success
[Supervisor] Info: start flash-update.service
[Supervisor] Info: flash-update.service exit success
[Supervisor] Info: start oemcheck.service
[Supervisor] Error: could not start: /etc/boot.d/core/oemcheck
[Supervisor] execvp returned: No such file or directory
[Supervisor] Info: oemcheck.service ex[    5.800354][0] AVM_WATCHDOG: System Init Ueberwachung 240 Sekunden
it error
[Supervisor] Info: start watchdog.service
[Supervisor] Info: watchdog.service exit success
[Supervisor] Info: start capi-config.service
[Supervisor] Info: start udev.service
[Supervisor] Info: start udevadm.service
[Supervisor] Info: capi-config.service exit success
[    5.992819][1] udevd[345]: starting version 3.2.5
[    6.047915][1] udevd[345]: specified group 'tty' unknown
[    6.048248][1] udevd[345]: specified group 'dialout' unknown
[    6.052605][1] udevd[345]: specified group 'kmem' unknown
[    6.058211][1] udevd[345]: specified group 'input' unknown
[    6.063549][1] udevd[345]: specified group 'video' unknown
[    6.068983][1] udevd[345]: specified group 'audio' unknown
[    6.074535][1] udevd[345]: specified group 'lp' unknown
[    6.080026][1] udevd[345]: specified group 'disk' unknown
[    6.085107][1] udevd[345]: specified group 'cdrom' unknown
[    6.090607][1] udevd[345]: specified group 'tape' unknown
[    6.098759][1] udevd[345]: starting eudev-3.2.5
[    6.536103] ssdk_switch_device_num_init[1027]:INFO:ess-switch dts node number: 1
[    6.539876] ssdk_dt_get_switch_node[866]:INFO:ess-switch DT exist!
[    6.546853] ssdk_dt_parse_access_mode[767]:INFO:switch_access_mode: local bus
[    6.553013] ssdk_dt_parse_access_mode[780]:INFO:switchreg_base_addr: 0xc000000
[    6.560122] ssdk_dt_parse_access_mode[781]:INFO:switchreg_size: 0x80000
[    6.567327] ssdk_dt_parse_mac_mode[248]:INFO:mac mode = 0x0
[    6.573574] ssdk_dt_parse_mac_mode[254]:INFO:mac mode1 doesn't exit!
[    6.579131] ssdk_dt_parse_mac_mode[263]:INFO:mac mode2 doesn't exit!
[    6.585468] ssdk_dt_parse_phy_info[521]:INFO:qcom,port_phyinfo DT doesn't exist!
[    6.591815] ssdk_dt_parse_mdio[618]:INFO:mdio DT exist!
[    6.598854] ssdk_dt_parse_led[840]:INFO:current dts led_source_num is 0
[    6.604057] ssdk_dt_parse_psgmii[732]:INFO:ess-psgmii DT exist!
[    6.611009][3] ssdk_plat_init start
[    6.612936] ssdk_plat_init[1434]:INFO:Enable ess clk
[    6.681810] malibu_phy_api_ops_init[2874]:INFO:qca probe malibu phy driver succeeded!
[    6.689210] regi_init[3888]:INFO:Initializing DESS!!
[    8.165068] ssdk_psgmii_single_phy_testing[2316]:ERROR:PHY 4 single PSGMII test fail
[    8.380951] ssdk_psgmii_all_phy_testing[2387]:ERROR:PHY 4 all PSGMII test fail
[    8.384648] ssdk_psgmii_self_test[2506]:ERROR:phy test 0 failed: phy_t_status=0x1010.
[    9.110295][0] [0]system-load  83% loadavg 0.8 0.2 0.1 - pgstat: sum=49914 free=43613 slab=1950 alloc=2416/s fault=1841/s (sleep 1)
[    9.133923][3] [3]system-load  87% loadavg 0.8 0.2 0.1 - task runtime:29% max:udevd 25%  pgstat: sum=49914 free=43613 slab=1950 alloc=2426/s fault=1848/s (sleep 3)
[   10.076363] ssdk_psgmii_self_test[2524]:INFO:PSGMII recovered after 1 times reset
[   10.080332] ssdk_switch_register[1860]:INFO:Chip version 0x1401
[   10.086884] qca_link_polling_select[1516]:INFO:link-polling-required node does not exist
[   10.093091] ssdk_switch_register[1885]:INFO:polling is selected
[   10.100812] regi_init[3897]:INFO:Initializing DESS Done!!
[   10.105803][3] [regi_init] AVM_PA init
[   10.129331] regi_init[3936]:INFO:qca-ssdk module init succeeded!
[   10.149381][3] [module-mem] give 0x10000 bytes at c0e01000 to module 'essedma' (0x21b000 bytes left)
[   10.151685][3] Using 5 netdevs
[   10.158837][3] EDMA  Dev eth0 (0) --> phy mdio 0
[   10.160498][3] EDMA  Dev eth1 (1) --> phy mdio 1
[   10.165296][3] EDMA  Dev eth2 (2) --> phy mdio 2
[   10.169891][3] EDMA  Dev eth3 (3) --> phy mdio 3
[   10.174480][3] EDMA  Dev wan (4) --> phy mdio 4
[   10.179343][3] [avm_request_fiq_on] Virtual IRQ numbers are not supported. Use HWIRQ (272) for requested IRQ (77)
[Supervisor] Info: udevadm.service exit success
[Supervisor] Info: start piglet.service
[   10.277975][0] 
[   10.277975][0] [avm_debug] redirecting kernel-messages (/dev/debug)
[Supervisor] Info: piglet.service exit success
[Supervisor] Info: start capi.service
[Supervisor] Info: start modules-load.service
[   10.305098][3] 
[   10.305098][3] [avm_debug] redirecting kernel-messages (/dev/debug)
cat: can't open '/dev/debug': Device or resource busy
[   10.325798][1] cchardevice: loaded
[   10.383321][0] [module-mem] give 0x59000 bytes at c0e11000 to module 'pcmlink' (0x1c2000 bytes left)
[   10.387320][0] Could not find Env 'kernel_args' in the device tree
[   10.547139][2] [module-mem] give 0x135000 bytes at c0e6a000 to module 'isdn_fbox_fon5' (0x8d000 bytes left)
[   10.556475][2] [capi_oslib]avm_stack_attach: cpu2 -> cpu1
[   10.573851][1] 6[isdn]PCMLINK:  Codecslots=0 Slics=0 Pots=0 TE=0 NT=0 DECT=0 no HwCross DSP-EC: 0
[   10.574305][1] [isdn]no hardware found: voip-only
[   10.630151][2] [2]system-load  77% loadavg 0.15 0.3 0.1 - task runtime:26% max:udevd 17%  pgstat: sum=47537 free=39480 slab=2575 alloc=3025/s fault=2025/s (sleep 1)
[   10.664420][0] [module-mem] give 0x57000 bytes at c0f9f000 to module 'capi_codec' (0x36000 bytes left)
[Supervisor] Info: capi.service exit success
[   10.730795][2] kdsld: init start (sizeof(struct sk_buff) = 456)
[   10.730851][2] kdsld: Initialisation of debughandles ...
[   10.730918][2] kdsld: Initialisation of debughandles [OK]
[   10.730956][2] kdsld: Initialisation of global ...
[   10.731453][2] kdsld: Initialisation of global [OK]
[   10.731488][2] kdsld: Initialisation of procfs ...
[   10.731588][2] kdsld: Initialisation of procfs [OK]
[   10.731625][2] kdsld: Initialisation of kmod_debugctl ...
[   10.731691][2] kdsld: Initialisation of kmod_debugctl [OK]
[   10.731722][2] kdsld: Initialisation of cenv ...
[   10.731745][2] kdsld: Initialisation of cenv [OK]
[   10.731771][2] kdsld: Initialisation of ctimer ...
[   10.732146][2] kdsld: Initialisation of ctimer [OK]
[   10.732183][2] kdsld: Initialisation of dsld_setup ...
[   10.732215][2] kdsld: Initialisation of dsld_setup [OK]
[   10.732243][2] kdsld: Initialisation of adsl_net ...
[   10.733458][2] kdsld: Initialisation of adsl_net [OK]
[   10.733507][2] kdsld: Initialisation of ppptty_net ...
[   10.734788][2] kdsld: Initialisation of ppptty_net [OK]
[   10.734838][2] kdsld: Initialisation of ingress_shaping ...
[   10.736171][2] kdsld: Initialisation of ingress_shaping [OK]
[   10.736231][2] kdsld: Initialisation of pppdp ...
[   10.754165][2] kdsld: Initialisation of pppdp [OK]
[   10.754224][2] kdsld: Initialisation of kmodcmddev ...
[   10.754295][2] kdsld: Initialisation of kmodcmddev [OK]
[   10.754343][2] kdsld: Initialisation of kdsldev ...
[   10.754406][2] kdsld: Initialisation of kdsldev [OK]
[   10.754440][2] kdsld: Initialisation of kvpnd ...
[   10.754477][2] kdsld: Initialisation of kvpnd [OK]
[   10.754511][2] kdsld: Initialisation of kdsluserdev ...
[   10.754542][2] kdsld: Initialisation of kdsluserdev [OK]
[   10.754572][2] kdsld: Initialisation of kdsltrafficdev ...
[   10.754628][2] kdsld: Initialisation of kdsltrafficdev [OK]
[   10.754659][2] kdsld: Initialisation of kdslmiscdev ...
[   10.754689][2] kdsld: Initialisation of kdslmiscdev [OK]
[   10.754718][2] kdsld: Initialisation of packettrace ...
[   10.754811][2] kdsld: Initialisation of packettrace [OK]
[   10.754843][2] kdsld: Initialisation of nqos ...
[   10.756620][2] kdsld: Initialisation of nqos [OK]
[   10.756670][2] kdsld: Initialisation of http_filter ...
[   10.756704][2] userman: device registerd (userman_url) with major=235
[   10.756729][2] kdsld: Initialisation of http_filter [OK]
[   10.756752][2] kdsld: Initialisation of atmvcchook ...
[   10.756777][2] kdsld: Initialisation of atmvcchook [OK]
[   10.756799][2] kdsld: Initialisation of timer ...
[   10.756833][2] kdsld: Initialisation of timer [OK]
[   10.756857][2] kdsld: Initialisation of netdevice_notifier ...
[   10.756959][2] kdsld: Initialisation of netdevice_notifier [OK]
[   10.756987][2] kdsld: Initialisation of ttychannel_ldisc ...
[   10.757013][2] kdsld: ttychannel: ldisc 8 registered
[   10.757036][2] kdsld: Initialisation of ttychannel_ldisc [OK]
[   10.757059][2] kdsld: Initialisation of guestflt ...
[   10.757134][2] kdsld: Initialisation of guestflt [OK]
[   10.757159][2] kdsld: Initialisation of bridgeflt ...
[   10.757210][2] kdsld: Initialisation of bridgeflt [OK]
[   10.757235][2] kdsld: Initialisation of krextd ...
[   10.757260][2] kdsld: Initialisation of krextd:debughandles ...
[   10.757298][2] kdsld: Initialisation of krextd:debughandles [OK]
[   10.757322][2] kdsld: Initialisation of krextd:global ...
[   10.757350][2] kdsld: Initialisation of krextd:global [OK]
[   10.757375][2] kdsld: Initialisation of krextd:memcache ...
[   10.759179][2] kdsld: Initialisation of krextd:memcache [OK]
[   10.759231][2] kdsld: Initialisation of krextd:igmpcompr ...
[   10.759263][2] kdsld: Initialisation of krextd:igmpcompr [OK]
[   10.759288][2] kdsld: Initialisation of krextd:krextdev ...
[   10.759346][2] kdsld: Initialisation of krextd:krextdev [OK]
[   10.759378][2] kdsld: Initialisation of krextd:krextdev_wland ...
[   10.759417][2] kdsld: Initialisation of krextd:krextdev_wland [OK]
[   10.759449][2] kdsld: Initialisation of krextd:netdevice_notifier ...
[   10.759500][2] kdsld: Initialisation of krextd:netdevice_notifier [OK]
[   10.759529][2] kdsld: Initialisation of krextd:krextdprocfs ...
[   10.759603][2] kdsld: Initialisation of krextd:krextdprocfs [OK]
[   10.759634][2] kdsld: Initialisation of krextd:krextdtimer ...
[   10.759665][2] kdsld: Initialisation of krextd:krextdtimer [OK]
modprobe: module qcrypto not found in modules.dep
[   10.759693][2] kdsld: Initialisation of krextd [OK]
[   10.759717][2] kdsld: Initialisation of kdsldprocfs ...
[   10.759803][2] kdsld: Initialisation of kdsldprocfs [OK]
[   10.759829][2] kdsld: Initialisation of pcp ...
[   10.760603][2] kdsld: Initialisation of pcp [OK]
[   10.760638][2] kdsld: Initialisation [OK]
[ERROR] Failed to load kernel module qcrypto
[Supervisor] Info: modules-load.service exit success
[Supervisor] Info: start devnodes.service
[   11.110095][1] [1]system-load  76% loadavg 0.15 0.3 0.1 - task runtime:6% max:udevd 1%  pgstat: sum=47701 free=39348 slab=2721 alloc=3165/s fault=2089/s (sleep 2)
[   11.129864][3] avm_power: [avm_power_temperature] No cpu sensor registered
[Supervisor] Info: devnodes.service exit success
[Supervisor] Info: start apparmor.service
[Supervisor] Info: start filesystem.service
[Supervisor] Info: start jffs.service
/etc/boot.d/core/filesystems: line 9: mount_media: not found
[Supervisor] Info: filesystem.service exit error
[Supervisor] Info: start default-files.service
[   11.578667][3] audit: type=1400 audit(11.575:2): apparmor="STATUS" operation="profile_load" name="/sbin/nqcs" pid=511 comm="dd"
0+1 records in
0+1 records out
[Supervisor] Info: apparmor.service exit success
[   11.604823][0] jffs2: notice: (509) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[INFO] /dev/mtdblock6 mounted at /data
[Supervisor] Info: jffs.service exit success
[ERROR] /etc/internal_memory_default_en not found
TAM: create JFFS2 directory /data/tam
[   11.726498][3] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_usb_host: norm_power_rate=500 act_rate=0 mul=5 div=1 offset=0 NormP=2500 mW -> SumNormP=2500 mW
[   11.726689][3] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_usb_host2: norm_power_rate=500 act_rate=0 mul=5 div=1 offset=0 NormP=2500 mW -> SumNormP=5000 mW
[   11.726804][3] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_wlan: norm_power_rate=100 act_rate=0 mul=130 div=10 offset=100 NormP=1400 mW -> SumNormP=6400 mW
[   11.726909][3] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_cpuclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=6400 mW
[   11.727010][3] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_loadrate: norm_power_rate=100 act_rate=29 mul=29 div=10 offset=0 NormP=290 mW -> SumNormP=6690 mW
[   11.727111][3] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_systemclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=1500 NormP=1500 mW -> SumNormP=8190 mW
[   11.727212][3] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_ethernet: norm_power_rate=2817 act_rate=268435456 mul=1 div=1 offset=50 NormP=2867 mW -> SumNormP=11057 mW
[Supervisor] Info: default-files.service exit success
[Supervisor] Info: start config.service
[Supervisor] Info: start debug.service
[Supervisor] Info: start sysctl.service
net.ipv4.tcp_min_snd_mss = 536
kernel.panic_on_oops = 1
vm.panic_on_oom = 2
kernel.printk = 4
net.ipv4.ip_forward = 1
net.ipv4.tcp_min_tso_segs = 100
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1
[Supervisor] Info: sysctl.service exit success
[INFO] have to stop cat /dev/debug.
[   11.793029] sysrq: SysRq : Changing Loglevel
[   11.793094][0] sysrq: Loglevel set to 4
cat: read error: Broken pipe
[Supervisor] Info: debug.service exit success
[Supervisor] Info: config.service exit success
[Supervisor] Info: start avmipcd.service
[Supervisor] Info: start boxnotify.service
[Supervisor] Info: start capitcp.service
[Supervisor] Info: start inetd.service
[Supervisor] Info: start psupport-init-prenet.service
[Supervisor] Info: start run_clock.service
[Supervisor] Info: inetd.service exit success
run_clock demon started

[Supervisor] Info: run_clock.service exit success
[Supervisor] Info: boxnotify.service exit success
[Supervisor] Info: avmipcd.service exit success
[Supervisor] Info: start avmnexusd.service
[Supervisor] Info: start psetd.service
[Supervisor] Info: psupport-init-prenet.service exit success
[Supervisor] Info: start net.service
/etc/ewnw_devfiles.sh: checking /dev files ....
/etc/ewnw_devfiles.sh: /dev/kdsld already exists
/etc/ewnw_devfiles.sh: mknod /dev/kvpnd c 243 0
/etc/ewnw_devfiles.sh: /dev/kdsldptrace0 already exists
/etc/ewnw_devfiles.sh: /dev/kdsldptrace1 already exists
/etc/ewnw_devfiles.sh: /dev/kdsldptrace2 already exists
/etc/ewnw_devfiles.sh: /dev/kdsldptrace3 already exists
/etc/ewnw_devfiles.sh: /dev/kdsldptrace4 already exists
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace5 c 239 5
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace6 c 239 6
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace7 c 239 7
[Supervisor] Info: capitcp.service exit success
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace8 c 239 8
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace9 c 239 9
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace10 c 239 10
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace11 c 239 11
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace12 c 239 12
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace13 c 239 13
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace14 c 239 14
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace15 c 239 15
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace16 c 239 16
/etc/ewnw_devfiles.sh: /dev/kdsldptrace17 already exists
/etc/ewnw_devfiles.sh: /dev/kdsldptrace18 already exists
/etc/ewnw_devfiles.sh: /dev/kdsldptrace19 already exists
/etc/ewnw_devfiles.sh: /dev/kdsldptrace20 already exists
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace21 c 239 21
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace22 c 239 22
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace23 c 239 23
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace24 c 239 24
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace25 c 239 25
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace26 c 239 26
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace27 c 239 27
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace28 c 239 28
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace29 c 239 29
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace30 c 239 30
/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace31 c 239 31
Jan  1 01:00:12 avmnexusd[562]: starting ... (normal)

/etc/ewnw_devfiles.sh: mknod /dev/kdsldptrace32 c 239 32
1970-01-01 01:00:12 avmnexusd[562]: ready (0sec)
[Supervisor] Info: avmnexusd.service exit success
/etc/ewnw_devfiles.sh: mknod /dev/knqos c 238 0
/etc/ewnw_devfiles.sh: mknod /dev/avmtrackd c 237 0
/etc/ewnw_devfiles.sh: mknod /dev/avmtrackdquery c 236 0
/etc/ewnw_devfiles.sh: mknod /dev/bridgeflt c 234 0
/etc/ewnw_devfiles.sh: mknod /dev/krextd c 233 0
/etc/ewnw_devfiles.sh: mknod /dev/krextd_wlan c 232 0
/etc/ewnw_devfiles.sh: /dev files checked
[Supervisor] Info: psetd.service exit success
Jan  1 01:00:13 l2tpv3d[803]: starting ... (normal)

Jan  1 01:00:13 l2tpv3d[811]: started.

1970-01-01 01:00:13 l2tpv3d[803]: ready (0sec)
Jan  1 01:00:13 l2tpv3d[811]: verbose: DISABLED

Jan  1 01:00:13 ctlmgr[816]: pcpc_create_ctx: no pcpserver found

Jan  1 01:00:14 vpnd[821]: /var/flash/vpn.cfg: is empty

Jan  1 01:00:14 vpnd[821]: load_config(vpn): file empty - factory default loaded

Jan  1 01:00:14 vpnd[821]: starting ... (normal)

Jan  1 01:00:14 vpnd[830]: /var/flash/vpn.cfg: is empty

Jan  1 01:00:14 vpnd[830]: load_config(vpn): file empty - factory default loaded

Jan  1 01:00:14 vpnd[830]: [main]: startup ($Revision$$CompileDate: Oct 26 2021 14:15:22 $)

1970-01-01 01:00:14 vpnd[821]: ready (0sec)
Jan  1 01:00:14 ctlmgr[817]: /var/flash/ewnwstatus.cfg: is empty

Jan  1 01:00:14 ctlmgr[817]: load_config(ewnwstatus): file empty - factory default loaded

Jan  1 01:00:15 upnpd[834]: starting ... (normal)

1970-01-01 01:00:15 upnpd[834]: ready (0sec)
Jan  1 01:00:16 multid[842]: /var/flash/vpn.cfg: is empty

Jan  1 01:00:16 multid[842]: load_config(vpn): file empty - factory default loaded

Jan  1 01:00:16 multid[842]: startup ($Revision$$CompileDate: Oct 26 2021 14:15:22 $)

Jan  1 01:00:16 multid[842]: starting ... (normal)

Jan  1 01:00:16 multid[877]: HWRevision=227

Jan  1 01:00:16 multid[877]: br->interfaces: remove wan

Jan  1 01:00:16 multid[877]: opt_without_tr069discover=0, tr069disc=0, AR7CFG->vinax_hsi_lan_ports=(null), multid.tcom_targetarch=0, is_eth_switch_installed()=0, multid.cpmac_no_ata_possible=0, pppoeiface=wan

Jan  1 01:00:16 multid[877]: bridge_configured: nqos_bridge_active=0, bridge_port_set=0x0, igmp_flt_portset=0x0

Jan  1 01:00:17 ctlmgr[817]: WLANLIB: wlan_plugin_init:868: prj revision 0x1c35e1c

Jan  1 01:00:17 ctlmgr[817]: WLANLIB: wlan_libs_nexus_init:260: Get Nexus info failed: try again later.

Jan  1 01:00:18 multid[877]: flood ratelimiting on bridge lan is supported


Jan  1 01:00:18 multid[877]: list[0]=lan

Jan  1 01:00:18 multid[877]: list[0]=lan

Jan  1 01:00:18 multid[877]: list[0]=lan

Jan  1 01:00:18 multid[877]: list[0]=lan

Jan  1 01:00:18 ctlmgr[817]: WLANLIB: wcsi_socket_connect:313: Establishing RPC connection failed with TIMEOUT

Jan  1 01:00:19 multid[877]: flood ratelimiting on bridge guest is supported


Jan  1 01:00:19 multid[877]: mrouter: using IGMPv3 for upstream interface dsl

Jan  1 01:00:19 multid[877]: mrouter: using IGMPv3 for other interfaces

Jan  1 01:00:20 ctlmgr[817]: /var/flash/stat.cfg: is empty

Jan  1 01:00:20 ctlmgr[817]: /etc/default/avme/stat.cfg: is empty

Jan  1 01:00:20 ctlmgr[817]: load_config(stat): file empty - factory default loaded

Jan  1 01:00:23 multid[877]: resolv.conf with 127.0.0.1 written

Jan  1 01:00:23 multid[877]: DHCPD on lan

Jan  1 01:00:23 multid[877]: DHCPD on lan:0 skipped, is virtual interface

Jan  1 01:00:23 multid[877]: DHCPD on guest

Jan  1 01:00:23 multid[877]: open(/dev/userman) - No such file or directory (2)

Jan  1 01:00:23 multid[877]: Warning: dnsd_start: no dns server added

Jan  1 01:00:23 multid[877]: interface lo up.

Jan  1 01:00:23 multid[877]: interface lo carrier up

Jan  1 01:00:23 multid[877]: list[0]=lan

Jan  1 01:00:23 multid[877]: list[1]=guest

Jan  1 01:00:23 multid[877]: br_get_interfaces(guest)=0

Jan  1 01:00:23 multid[877]: interface eth0 up.

Jan  1 01:00:23 multid[877]: list[0]=lan

Jan  1 01:00:23 multid[877]: list[1]=guest

Jan  1 01:00:23 multid[877]: br_get_interfaces(guest)=0

Jan  1 01:00:23 multid[877]: interface eth1 up.

Jan  1 01:00:23 multid[877]: list[0]=lan

Jan  1 01:00:23 multid[877]: list[1]=guest

Jan  1 01:00:23 multid[877]: br_get_interfaces(guest)=0

Jan  1 01:00:23 multid[877]: interface eth2 up.

Jan  1 01:00:23 multid[877]: list[0]=lan

Jan  1 01:00:23 multid[877]: list[1]=guest

Jan  1 01:00:23 multid[877]: br_get_interfaces(guest)=0

Jan  1 01:00:23 multid[877]: interface eth3 up.

Jan  1 01:00:23 multid[877]: DHCPD on lan

Jan  1 01:00:23 multid[877]: interface lan up.

Jan  1 01:00:23 multid[877]: DHCPD on lan

Jan  1 01:00:23 multid[877]: mrouter: lan: vif 0 if_index 12

Jan  1 01:00:23 multid[877]: interface guest up.

Jan  1 01:00:23 multid[877]: DHCPD on guest

Jan  1 01:00:23 multid[877]: mrouter: lan: vif 0 if_index 12

Jan  1 01:00:23 multid[877]: mrouter: guest: vif 1 if_index 13

Jan  1 01:00:23 multid[877]: verbose: DISABLED

1970-01-01 01:00:23 multid[842]: ready (7sec)
Jan  1 01:00:23 ddnsd[926]: br->interfaces: remove wan

Jan  1 01:00:23 ddnsd[926]: startup ($Revision$$CompileDate: Oct 26 2021 14:15:22 $)

Jan  1 01:00:23 ddnsd[926]: starting ... (normal)

Jan  1 01:00:23 ddnsd[930]: DDNS: no valid accounts

Jan  1 01:00:23 ddnsd[930]: [930] Start failed


1970-01-01 01:00:23 ddnsd[926]: [926]: Daemon start failed (0sec)
FATAL: ddnsd not running after started
Jan  1 01:00:23 pcpd[932]: startup (Oct 26 2021 14:15:22)

Jan  1 01:00:23 pcpd[932]: starting ... (normal)

Jan  1 01:00:23 pcpd[934]: Local v4 address: 192.168.178.1

Jan  1 01:00:23 pcpd[934]: verbose: DISABLED

1970-01-01 01:00:23 pcpd[932]: ready (0sec)
rc.wlan: Start WLAN...
Jan  1 01:00:24 ctlmgr[817]: /var/flash/vpn.cfg: is empty

Jan  1 01:00:24 ctlmgr[817]: load_config(vpn): file empty - factory default loaded

WLAND:[00948]:01:00.24/[0024.230]:[VER]Registered new module default, DEFAULT, 0
WLAND:[00948]:01:00.24/[0024.230]:[VER]Registered new module global, GLOBAL, 0
WLAND:[00948]:01:00.24/[0024.230]:[ALW]BUILD: May 31 2021, 18:38:39
Jan  1 01:00:24 ctlmgr[817]: /var/flash/vpn.cfg: is empty

Jan  1 01:00:24 ctlmgr[817]: load_config(vpn): file empty - factory default loaded

Jan  1 01:00:24 dsld[953]: set no arch

Jan  1 01:00:24 dsld[953]: br->interfaces: remove wan

Jan  1 01:00:24 dsld[953]: set no arch

Jan  1 01:00:24 dsld[953]: startup ($Revision$$CompileDate: Oct 26 2021 14:15:22 $)

Jan  1 01:00:25 ctlmgr[817]: /var/flash/fwupdatetrace.cfg: is empty

Jan  1 01:00:25 ctlmgr[817]: /var/flash/fwupdatetrace.cfg: is empty

Jan  1 01:00:25 ctlmgr[817]: /var/flash/fwupdatetrace.cfg: is empty

Jan  1 01:00:25 ctlmgr[817]: /var/flash/fwupdatetrace.cfg: is empty

Jan  1 01:00:25 ctlmgr[817]: /var/flash/fwupdatetrace.cfg: is empty

Jan  1 01:00:25 ctlmgr[817]: /var/flash/fwupdatetrace.cfg: is empty

Jan  1 01:00:27 dsld[953]: starting ... (normal)

Jan  1 01:00:27 dsld[992]: DSL Mac f0:b0:14:7c:4e:6a

Jan  1 01:00:27 dsld[992]: VOIP Mac f0:b0:14:7c:4e:6b

Jan  1 01:00:27 dsld[992]: VCC2 Mac f0:b0:14:7c:4e:6c

Jan  1 01:00:27 dsld[992]: VCC3 Mac f0:b0:14:7c:4e:67

Jan  1 01:00:27 dsld[992]: sync_ata is igd_device

Jan  1 01:00:27 dsld[992]: interface lo carrier_up.

Jan  1 01:00:27 dsld[992]: /var/flash/stat.cfg: is empty

Jan  1 01:00:27 dsld[992]: /etc/default/avme/stat.cfg: is empty

Jan  1 01:00:27 dsld[992]: load_config(stat): file empty - factory default loaded

Jan  1 01:00:27 dsld[992]: egress shaping with fq_codel

Jan  1 01:00:27 dsld[992]: ingress shaping with fq_codel

Jan  1 01:00:27 dsld[992]: no sync

Jan  1 01:00:27 dsld[992]: _sync_lost(0): sync_ata (0)

Jan  1 01:00:27 dsld[992]: verbose: DISABLED

1970-01-01 01:00:27 dsld[953]: ready (0sec)
Jan  1 01:00:27 cloudmsgd[1003]: starting ... (normal)

cloudmsgd not running after started
Jan  1 01:00:28 deviceinfod[1010]: starting ... (normal)

1970-01-01 01:00:28 deviceinfod[1010]: ready (0sec)
[Supervisor] Info: net.service exit success
[Supervisor] Info: start kpid.service
[Supervisor] Info: start meshd.service
[Supervisor] Info: start plcd.service
[Supervisor] Info: start ptest_release.service
[Supervisor] Info: start usb.service
kpid: Sending section usb failed with error -1:
sysfs_usb 1 {"sv":"gen/v1","kpi":{}}
kpid: Sending section hwpa failed with error -1:
sysfs_hwpa 1 {"sv":"gen/v1","kpi":{}}
kpid: Sending section system failed with error -1:
sysfs_system 1 {"sv":"gen/v1","kpi":{"chip":{"value0":2424,"value1":0,"value2":39791536,"value3":1221109760,"value4":49546696,"value5":61867550,"value6":0,"value7":0},"temperatures":{}}}
mount: mounting usbfs on /proc/bus/usb failed: No such file or directory
[Supervisor] Info: ptest_release.service exit success
[Supervisor] Info: start configd.service
[Supervisor] Info: start voip.service
[Supervisor] Info: configd.service exit success
Jan  1 01:00:28 plcd[1016]: event=Opening the HomePlug library. str1= str2= str3=

Jan  1 01:00:28 plcd[1016]: event=Service started. str1= str2= str3=

starting XHCI driver
XHCI USB 3.0 Host with port_config:0 started
XHCI Platform Driver started
[Supervisor] Info: usb.service exit success
[Supervisor] Info: start smb2.service
Jan  1 01:00:29 meshd[1015]: LOG: main: Hello from meshd.

Jan  1 01:00:29 meshd[1015]: starting ... (normal)

Jan  1 01:00:29 meshd[1241]: verbose: DISABLED

Jan  1 01:00:29 plcd[1016]: event=Client connected. str1= str2= str3=

1970-01-01 01:00:29 meshd[1015]: ready (0sec)
[Supervisor] Info: meshd.service exit success
[Supervisor] Info: start meshd_config.service
ls: /var/media/ftp/*: No such file or directory
Jan  1 01:00:29 telefon[1110]: use clock_gettime(CLOCK_MONOTONIC)!

Jan  1 01:00:29 telefon[1110]: No S0NT!

Jan  1 01:00:29 telefon[1110]: NoOldMSNNames

[Supervisor] Info: meshd_config.service exit success
telefon: SIGCHLD PID 1267 received!
[Supervisor] Info: smb2.service exit success
Jan  1 01:00:29 telefon[1110]: INFO No MOH file '/data/tam/fx_moh' !

Jan  1 01:00:29 telefon[1278]: NoOldMSNNames

Jan  1 01:00:30 plcd[1016]: event=Client connected. str1= str2= str3=

Jan  1 01:00:30 voipd[1293]: starting ... (normal)

Jan  1 01:00:31 meshd[1241]: wlan_service: RoleStateChangeHandler: local interface 42:B0:14:7C:4E:69 not found in topology - drop update

Jan  1 01:00:31 meshd[1241]: wlan_service: RoleStateChangeHandler: local interface 42:B0:14:7C:4E:68 not found in topology - drop update

Jan  1 01:00:31 meshd[1241]: wlan_service: RoleStateChangeHandler: local interface 02:B0:14:7C:4E:69 not found in topology - drop update

Jan  1 01:00:31 meshd[1241]: wlan_service: RoleStateChangeHandler: local interface 02:B0:14:7C:4E:68 not found in topology - drop update

Jan  1 01:00:31 meshd[1241]: wlan_service: RoleStateChangeHandler: local interface F2:B0:14:7C:4E:69 not found in topology - drop update

Jan  1 01:00:31 meshd[1241]: wlan_service: RoleStateChangeHandler: local interface F2:B0:14:7C:4E:68 not found in topology - drop update

Jan  1 01:00:31 meshd[1241]: wlan_service: RoleStateChangeHandler: local interface F0:B0:14:7C:4E:69 not found in topology - drop update

Jan  1 01:00:31 meshd[1241]: wlan_service: RoleStateChangeHandler: local interface F0:B0:14:7C:4E:68 not found in topology - drop update

Jan  1 01:00:31 voipd[1467]: internet: dns_context: internet (ref 1)

Jan  1 01:00:31 voipd[1467]: internet: dns_context: ipv4 only, dns, 0, 2/5 300, 1

Jan  1 01:00:31 voipd[1467]: internet: dns_context: 1 name server:

Jan  1 01:00:31 voipd[1467]: internet: dns_context: 127.0.0.1 0

Jan  1 01:00:31 voipd[1467]: internet: if dsl (16) nr 0 connection 0

Jan  1 01:00:31 voipd[1467]: internet: dnscctx internet stay online 1 natstate no NAT

Jan  1 01:00:31 voipd[1467]: internet: ipv4 no sync

Jan  1 01:00:31 voipd[1467]: internet: stackmode_ipv4

Jan  1 01:00:31 voipd[1467]: internet: dns_context: internet (ref 1)

Jan  1 01:00:31 voipd[1467]: internet: dns_context: ipv4 only, dns, 0, 2/5 300, 1

Jan  1 01:00:31 voipd[1467]: internet: dns_context: 1 name server:

Jan  1 01:00:31 voipd[1467]: internet: dns_context: 127.0.0.1 0

Jan  1 01:00:31 voipd[1467]: voip: dns_context: voip (ref 1)

Jan  1 01:00:31 voipd[1467]: voip: dns_context: ipv4 only, sipdns, 0, 2/5 300, 1

Jan  1 01:00:31 voipd[1467]: voip: dns_context: 1 name server:

Jan  1 01:00:31 voipd[1467]: voip: dns_context: 127.0.0.1 0

Jan  1 01:00:31 voipd[1467]: voip: if dsl (16) nr -1 connection 0

Jan  1 01:00:31 voipd[1467]: voip: dnscctx voip stay online 1 natstate no NAT

Jan  1 01:00:31 voipd[1467]: voip: ipv4 no sync

Jan  1 01:00:31 voipd[1467]: voip: stackmode_ipv4

Jan  1 01:00:31 voipd[1467]: voip: dns_context: voip (ref 1)

Jan  1 01:00:31 voipd[1467]: voip: dns_context: ipv4 only, sipdns, 0, 2/5 300, 1

Jan  1 01:00:31 voipd[1467]: voip: dns_context: 1 name server:

Jan  1 01:00:31 voipd[1467]: voip: dns_context: 127.0.0.1 0

Jan  1 01:00:31 voipd[1467]: mta: if mta0 (0) netmark 2

Jan  1 01:00:31 voipd[1467]: mta: dnscctx mta stay online 1 natstate no NAT

Jan  1 01:00:31 voipd[1467]: mta: ipv4 no sync

Jan  1 01:00:31 voipd[1467]: mta: ipv6 no sync

Jan  1 01:00:31 voipd[1467]: mta: stackmode_dual

Jan  1 01:00:31 voipd[1467]: mta: dns_context: mta (ref 1)

Jan  1 01:00:31 voipd[1467]: mta: dns_context: ipv4 only, none, 0, 2/5 300, 1

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: homenet (ref 1)

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: ipv4 only, none, 0, 2/5 300, 1

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: 1 name server:

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: 127.0.0.1 0

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: from 127.0.0.1

Jan  1 01:00:31 voipd[1467]: homenet: if lan (12)

Jan  1 01:00:31 voipd[1467]: homenet: dnscctx homenet stay online 1 natstate no NAT

Jan  1 01:00:31 voipd[1467]: homenet: ipv4 connected

Jan  1 01:00:31 voipd[1467]: homenet: stackmode_ipv4

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: homenet (ref 1)

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: ipv4 only, none, 0, 2/5 300, 1

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: 1 name server:

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: 127.0.0.1 0

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: from 127.0.0.1

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: homenet (ref 1)

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: ipv4 only, none, 0, 2/5 300, 1

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: 1 name server:

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: 127.0.0.1 0

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: from 127.0.0.1

Jan  1 01:00:31 voipd[1467]: vpn: if dsl (16) nr 0 connection 0

Jan  1 01:00:31 voipd[1467]: vpn: dnscctx homenet stay online 1 natstate no NAT

Jan  1 01:00:31 voipd[1467]: vpn: ipv4 no sync

Jan  1 01:00:31 voipd[1467]: vpn: stackmode_ipv4

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: homenet (ref 1)

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: ipv4 only, none, 0, 2/5 300, 1

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: 1 name server:

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: 127.0.0.1 0

Jan  1 01:00:31 voipd[1467]: homenet: dns_context: from 127.0.0.1

Jan  1 01:00:31 voipd[1467]: tunnel: dns_context: tunnel (ref 1)

Jan  1 01:00:31 voipd[1467]: tunnel: dns_context: ipv4 only, none, 0, 2/5 300, 1

Jan  1 01:00:31 voipd[1467]: tunnel: dns_context: 1 name server:

Jan  1 01:00:31 voipd[1467]: tunnel: dns_context: 127.0.0.1 0

Jan  1 01:00:31 voipd[1467]: tunnel: if tun0 (0)

Jan  1 01:00:31 voipd[1467]: tunnel: dnscctx tunnel stay online 1 natstate no NAT

Jan  1 01:00:31 voipd[1467]: tunnel: ipv4 no sync

Jan  1 01:00:31 voipd[1467]: tunnel: ipv6 no sync

Jan  1 01:00:31 voipd[1467]: tunnel: stackmode_dual

Jan  1 01:00:31 voipd[1467]: tunnel: dns_context: tunnel (ref 1)

Jan  1 01:00:31 voipd[1467]: tunnel: dns_context: ipv4 only, none, 0, 2/5 300, 1

Jan  1 01:00:31 voipd[1467]: tunnel: dns_context: 1 name server:

Jan  1 01:00:31 voipd[1467]: tunnel: dns_context: 127.0.0.1 0

1970-01-01 01:00:31 voipd[1293]: ready (1sec)
[Supervisor] Info: voip.service exit success
[Supervisor] Info: start voipkpid.service
[Supervisor] Info: voipkpid.service exit success
[Supervisor] Info: all Services loaded.
Jan  1 01:00:35 upnpd[836]: initlib libtcloud



starting pid 204, tty '/dev/ttyMSM0': '-/bin/sh'


BusyBox v1.29.3 (2020-11-19 19:00:39 CET) built-in shell (ash)

ermittle die aktuelle TTY
tty is "/dev/ttyMSM0"
unbekanntes Terminal
disable start/stop characters and flowcontrol
# uname -a
Linux fritz.box 4.4.60 #1 SMP PREEMPT 2021-04-26 armv7l
Installed packages:

Code: Select all

ath10k-board-qca4019 - 20211216-1
ath10k-firmware-qca4019-ct - 2020-11-08-1
base-files - 1439-r16495-bf0c965af0
block-mount - 2021-01-04-c53b1882-1
blockd - 2021-01-04-c53b1882-1
busybox - 1.33.2-2
ca-bundle - 20210119-1
ca-certificates - 20210119-1
cgi-io - 2021-09-08-98cef9dd-20
collectd - 5.12.0-10
collectd-mod-cpu - 5.12.0-10
collectd-mod-interface - 5.12.0-10
collectd-mod-iwinfo - 5.12.0-10
collectd-mod-load - 5.12.0-10
collectd-mod-memory - 5.12.0-10
collectd-mod-network - 5.12.0-10
collectd-mod-rrdtool - 5.12.0-10
dnsmasq - 2.85-8
dropbear - 2020.81-2
ethtool - 5.10-1
firewall - 2021-03-23-61db17ed-1
fritz-caldata - 1
fritz-tffs - 1
fstools - 2021-01-04-c53b1882-1
fwtool - 2019-11-12-8f7fe925-1
getrandom - 2020-10-25-9ef88681-2
hostapd-common - 2020-06-08-5a8b3662-39
htop - 3.1.2-1
ip6tables - 1.8.7-1
iptables - 1.8.7-1
iw - 5.9-8fab0c9e-3
iwinfo - 2021-04-30-c45f0b58-2.1
jshn - 2021-05-16-b14c4688-2
jsonfilter - 2018-02-04-c7e938d6-1
kernel - 5.4.179-1-9293aa012c7b0bee680050d84bada95e
kmod-ath - 5.4.179+5.10.85-1-1
kmod-ath10k-ct - 5.4.179+2021-09-22-e6a7d5b5-1
kmod-cfg80211 - 5.4.179+5.10.85-1-1
kmod-fs-autofs4 - 5.4.179-1
kmod-gpio-button-hotplug - 5.4.179-3
kmod-hwmon-core - 5.4.179-1
kmod-ip6tables - 5.4.179-1
kmod-ipt-conntrack - 5.4.179-1
kmod-ipt-core - 5.4.179-1
kmod-ipt-nat - 5.4.179-1
kmod-ipt-offload - 5.4.179-1
kmod-leds-gpio - 5.4.179-1
kmod-lib-crc-ccitt - 5.4.179-1
kmod-mac80211 - 5.4.179+5.10.85-1-1
kmod-nf-conntrack - 5.4.179-1
kmod-nf-conntrack6 - 5.4.179-1
kmod-nf-flow - 5.4.179-1
kmod-nf-ipt - 5.4.179-1
kmod-nf-ipt6 - 5.4.179-1
kmod-nf-nat - 5.4.179-1
kmod-nf-reject - 5.4.179-1
kmod-nf-reject6 - 5.4.179-1
kmod-nls-base - 5.4.179-1
kmod-ppp - 5.4.179-1
kmod-pppoe - 5.4.179-1
kmod-pppox - 5.4.179-1
kmod-slhc - 5.4.179-1
kmod-tun - 5.4.179-1
kmod-usb-core - 5.4.179-1
kmod-usb-dwc3 - 5.4.179-1
kmod-usb-dwc3-qcom - 5.4.179-1
kmod-usb3 - 5.4.179-1
libblobmsg-json20210516 - 2021-05-16-b14c4688-2
libbz2-1.0 - 1.0.8-1
libc - 1.1.24-3
libcap - 2.43-1
libcurl4 - 7.80.0-1
libdb47 - 4.7.25.4.NC-6
libevdev - 1.12.0-1
libevent2-7 - 2.1.12-1
libffi - 3.3-2
libgcc1 - 8.4.0-3
libgdbm - 1.18.1-2
libip4tc2 - 1.8.7-1
libip6tc2 - 1.8.7-1
libiwinfo-data - 2021-04-30-c45f0b58-2.1
libiwinfo-lua - 2021-04-30-c45f0b58-2.1
libiwinfo20210430 - 2021-04-30-c45f0b58-2.1
libjson-c5 - 0.15-2
libjson-script20210516 - 2021-05-16-b14c4688-2
libltdl7 - 2.4.6-2
liblua5.1.5 - 5.1.5-9
liblucihttp-lua - 2021-06-11-3dc89af4-1
liblucihttp0 - 2021-06-11-3dc89af4-1
liblzma - 5.2.5-3
liblzo2 - 2.10-4
libmbedtls12 - 2.16.12-1
libminiupnpc - 2.2.1-1
libnatpmp1 - 20150609-3
libncurses6 - 6.2-3
libnghttp2-14 - 1.43.0-1
libnl-tiny1 - 2020-08-05-c291088f-2
libopenssl-conf - 1.1.1m-1
libopenssl1.1 - 1.1.1m-1
libpcre - 8.44-3
libpthread - 1.1.24-3
libpython3-3.9 - 3.9.10-1
libreadline8 - 8.1-1
librrd1 - 1.0.50-3
librt - 1.1.24-3
libsqlite3-0 - 3330000-1
libubox20210516 - 2021-05-16-b14c4688-2
libubus-lua - 2021-06-30-4fc532c8-2
libubus20210630 - 2021-06-30-4fc532c8-2
libuci20130104 - 2021-04-14-4b3db117-5
libuclient20201210 - 2021-05-14-6a6011df-1
libudev-zero - 1.0.0-1
libusb-1.0-0 - 1.0.24-4
libustream-openssl20201210 - 2022-01-16-868fd881-1
libuuid1 - 2.36.1-2
libwolfssl5.1.1.99a5b54a - 5.1.1-stable-1
libxtables12 - 1.8.7-1
logd - 2020-10-25-9ef88681-2
lua - 5.1.5-9
luci - git-20.074.84698-ead5e81
luci-app-commands - git-21.099.45423-3fff72a
luci-app-firewall - git-22.046.85957-59c3392
luci-app-openvpn - git-22.025.78298-e927a11
luci-app-opkg - git-21.312.69848-4745991
luci-app-p910nd - git-20.108.38431-8f34e10
luci-app-privoxy - 1.0.6
luci-app-statistics - git-21.338.69888-2e5b2ab
luci-app-transmission - git-21.337.84190-285c589
luci-app-wifischedule - git-20.110.55046-74da73b
luci-base - git-22.046.85957-59c3392
luci-compat - git-22.046.85744-f08a0f6
luci-lib-base - git-20.232.39649-1f6dc29
luci-lib-ip - git-20.250.76529-62505bd
luci-lib-ipkg - git-18.318.71164-4bbe325
luci-lib-jsonc - git-19.317.29469-8da8f38
luci-lib-nixio - git-20.234.06894-c4a4e43
luci-mod-admin-full - git-19.253.48496-3f93650
luci-mod-network - git-22.046.85061-dd54dce
luci-mod-status - git-22.046.85784-0ac2542
luci-mod-system - git-22.019.40321-7a37d02
luci-proto-ipv6 - git-21.148.49484-14511e5
luci-proto-ppp - git-21.163.64918-6c6559a
luci-ssl-openssl - git-17.031.53232-b6341bd
luci-theme-bootstrap - git-22.047.35373-cc582eb
mtd - 26
nano - 6.1-1
netifd - 2021-10-30-8f82742c-1
odhcp6c - 2021-01-09-53f07e90-16
odhcpd-ipv6only - 2021-07-18-bc9d317f-3
openssl-util - 1.1.1m-1
openvpn-easy-rsa - 3.0.8-3
openvpn-openssl - 2.5.3-3
openwrt-keyring - 2021-02-20-49283916-2
opkg - 2021-06-13-1bf042dd-1
p910nd - 0.97-9
ppp - 2.4.8.git-2020-10-03-3
ppp-mod-pppoe - 2.4.8.git-2020-10-03-3
privoxy - 3.0.33-1
procd - 2021-03-08-2cfc26f8-1
python3 - 3.9.10-1
python3-asyncio - 3.9.10-1
python3-base - 3.9.10-1
python3-cgi - 3.9.10-1
python3-cgitb - 3.9.10-1
python3-codecs - 3.9.10-1
python3-ctypes - 3.9.10-1
python3-dbm - 3.9.10-1
python3-decimal - 3.9.10-1
python3-distutils - 3.9.10-1
python3-email - 3.9.10-1
python3-gdbm - 3.9.10-1
python3-light - 3.9.10-1
python3-logging - 3.9.10-1
python3-lzma - 3.9.10-1
python3-multiprocessing - 3.9.10-1
python3-ncurses - 3.9.10-1
python3-openssl - 3.9.10-1
python3-pkg-resources - 58.1.0-1
python3-pydoc - 3.9.10-1
python3-readline - 3.9.10-1
python3-setuptools - 58.1.0-1
python3-sqlite3 - 3.9.10-1
python3-unittest - 3.9.10-1
python3-urllib - 3.9.10-1
python3-xml - 3.9.10-1
rpcd - 2021-03-11-ccb75178-1
rpcd-mod-file - 2021-03-11-ccb75178-1
rpcd-mod-iwinfo - 2021-03-11-ccb75178-1
rpcd-mod-luci - 20210614
rpcd-mod-rrdns - 20170710
rrdtool1 - 1.0.50-3
swconfig - 12
terminfo - 6.2-3
tor - 0.4.6.10-1
tor-fw-helper - 0.3-2
tor-gencert - 0.4.6.10-1
tor-geoip - 0.4.6.10-1
tor-resolve - 0.4.6.10-1
transmission-daemon - 3.00-12
ubi-utils - 2.1.2-1
uboot-envtools - 2021.01-10
ubox - 2020-10-25-9ef88681-2
ubus - 2021-06-30-4fc532c8-2
ubusd - 2021-06-30-4fc532c8-2
uci - 2021-04-14-4b3db117-5
uclient-fetch - 2021-05-14-6a6011df-1
uhttpd - 2021-03-21-15346de8-2
uhttpd-mod-ubus - 2021-03-21-15346de8-2
urandom-seed - 3
urngd - 2020-01-21-c7f7b6b6-1
usbids - 0.354-1
usbutils - 013-2
usign - 2020-05-23-f1f65026-1
wifischedule - 1-3
wireless-regdb - 2021.08.28-1
wireless-tools - 29-6
wpad-mesh-openssl - 2020-06-08-5a8b3662-39
youtube-dl - 2021.4.7-1
youtube-dl-src - 2021.4.7-1
zlib - 1.2.11-3
DG.

Re: TorRouter v22.03.5

Posted: 10 Apr 2024, 00:59
by admin
Not tested but already build v22.03.5
With nicely new Dashboard:
Image

Overview:
Image

The serial upgrade logs:

Code: Select all

root@OpenWrt:/# Watchdog handover: fd=3
- watchdog -
killall: telnetd: no process killed
Sun Jun 19 14:04:44 CEST 2022 upgrade: Sending TERM to remaining processes ... hostapd wpa_supplicant netifd odhcpd uhttpd blockd collectd ubusd tor dnsmasq privoxy urngd logd rpcd
Sun Jun 19 14:04:47 CEST 2022 upgrade: Sending KILL to remaining processes ...
[19546.440044] sh (8151): drop_caches: 3
Sun Jun 19 14:04:48 CEST 2022 upgrade: Switching to ramdisk...
Sun Jun 19 12:04:53 UTC 2022 upgrade: Performing system upgrade...
[19551.219277] sh (8151): drop_caches: 3
Unlocking firmware ...

Writing from <stdin> to firmware ...
Appending jffs2 data from /tmp/sysupgrade.tgz to firmware..
.
Writing from <stdin> to firmware ...
Sun Jun 19 12:07:40 UTC 2022 upgrade: Upgrade completed
Sun Jun 19 12:07:41 UTC 2022 upgrade: Rebooting system...
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource busy
[
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00085
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Core 0 Frequency, 0 MHz
B -       261 - PBL, Start
B -      1338 - bootable_media_detect_entry, Start
B -      1678 - bootable_media_detect_success, Start
B -      1692 - elf_loader_entry, Start
B -      5068 - auth_hash_seg_entry, Start
B -      7210 - auth_hash_seg_exit, Start
B -    570972 - elf_segs_hash_verify_entry, Start
B -    685676 - PBL, End
B -    685700 - SBL1, Start
B -    774188 - pm_device_init, Start
D -         6 - pm_device_init, Delta
B -    775635 - boot_flash_init, Start
D -     54266 - boot_flash_init, Delta
B -    834077 - boot_config_data_table_init, Start
D -      3814 - boot_config_data_table_init, Delta - (419 Bytes)
B -    841285 - clock_init, Start
D -      7563 - clock_init, Delta
B -    853371 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
B -    856863 - sbl1_ddr_set_params, Start
B -    861855 - cpr_init, Start
D -         2 - cpr_init, Delta
B -    866240 - Pre_DDR_clock_init, Start
D -         4 - Pre_DDR_clock_init, Delta
D -     13153 - sbl1_ddr_set_params, Delta
B -    880073 - pm_driver_init, Start
D -         2 - pm_driver_init, Delta
B -    949989 - sbl1_wait_for_ddr_training, Start
D -        29 - sbl1_wait_for_ddr_training, Delta
B -    965886 - Image Load, Start
D -    143004 - QSEE Image Loaded, Delta - (286068 Bytes)
B -   1109390 - Image Load, Start
D -      1446 - SEC Image Loaded, Delta - (2048 Bytes)
B -   1119638 - Image Load, Start
D -     48140 - APPSBL Image Loaded, Delta - (88264 Bytes)
B -   1168196 - QSEE Execution, Start
D -        66 - QSEE Execution, Delta
B -   1174327 - SBL1, End
D -    490737 - SBL1, Delta
S - Flash Throughput, 1979 KB/s  (376799 Bytes,  190318 us)
S - DDR Frequency, 533 MHz

(AVM) EVA Revision: 1.3550
(C) Copyright 2005 AVM Date: Jul 25 2018 Time: 16:42:30 (0) 3 0x0-0x240D

[FLASH:] MACRONIX Uniform-Flash 32MB 256 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 512 sectors a 64kB)
[SYSTEM:] CortexA9

Eva_AVM >.....Device Tree Blob for SubRevision 4 not found.
Using Device Tree Blob of SubRevision 2


U-Boot 2012.07 [local,r11208-ce6496d796] (Sep 08 2020 - 11:39:21)

smem ram ptable found: ver: 1 len: 3
DRAM:  256 MiB
machid : 0x8010000
Maximum malloc length: 512 KBytes
mem_malloc_start/brk/end: 0x84140000/84140000/84200000
Relocation offset: 0
NAND:  SF: Detected MX25L25635E with page size 4 KiB, total 32 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x2000000
32 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
name         : offset   size
0:SBL1       : 00000000 00040000
0:MIBIB      : 00040000 00020000
0:QSEE       : 00060000 00060000
0:CDT        : 000c0000 00010000
0:DDRPARAMS  : 000d0000 00010000
0:APPSBLENV  : 000e0000 00010000
0:APPSBL     : 000f0000 00030000
machid: 8010000
Net:   Configure GPIOSRead 1024 bytes from 011dc00
maca: 2c:3a:fd:3:11:ae
macb: 2c:3a:fd:3:11:af
MAC0 addr:2c:3a:fd:3:11:ae
PHY ID1: 0x4d
PHY ID2: 0xd0b1
ipq40xx_ess_sw_init done
eth0
Hit any key to stop autoboot:  0

Loading from nand0, offset 0x2a0000
Fit image detected...
   FIT description: ARM OpenWrt FIT (Flattened Image Tree)
    Image 0 (kernel-1)
     Description:  ARM OpenWrt Linux-5.10.176
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x850000e4
     Data Size:    3020907 Bytes = 2.9 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80208000
     Entry Point:  0x80208000
     Hash algo:    crc32
     Hash value:   2e462039
     Hash algo:    sha1
     Hash value:   3b8b0f07183c273b83cdbfbb5522664aaa4b461d
    Image 1 (fdt-1)
     Description:  ARM OpenWrt avm_fritzbox-4040 device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x852e1a8c
     Data Size:    17278 Bytes = 16.9 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   bdd401b2
     Hash algo:    sha1
     Hash value:   e5b1fc67a0d33b9d37d94a556439b25540ac310e
    Default Configuration: 'config@1'
    Configuration 0 (config@1)
     Description:  OpenWrt avm_fritzbox-4040
     Kernel:       kernel-1
     FDT:          fdt-1
## Booting kernel from FIT Image at 85000000 ...
   Using 'config@1' configuration
   Trying 'kernel-1' kernel subimage
     Description:  ARM OpenWrt Linux-5.10.176
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x850000e4
     Data Size:    3020907 Bytes = 2.9 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80208000
     Entry Point:  0x80208000
     Hash algo:    crc32
     Hash value:   2e462039
     Hash algo:    sha1
     Hash value:   3b8b0f07183c273b83cdbfbb5522664aaa4b461d
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Flattened Device Tree from FIT Image at 85000000
   Using 'config@1' configuration
   Trying 'fdt-1' FDT blob subimage
     Description:  ARM OpenWrt avm_fritzbox-4040 device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x852e1a8c
     Data Size:    17278 Bytes = 16.9 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   bdd401b2
     Hash algo:    sha1
     Hash value:   e5b1fc67a0d33b9d37d94a556439b25540ac310e
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x852e1a8c
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 84128000, end 8412f37d ... OK
Read 1024 bytes from 011dc00
maca: 2c:3a:fd:3:11:ae
macb: 2c:3a:fd:3:11:af
Using machid 0x8010000 from environment

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.176 (torrouter@LD865) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 11.2.0 r19803-9a599fee93) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Thu Apr 27 20:28:15 2023
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: AVM FRITZ!Box 4040
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000080000000-0x000000008fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x0000000087dfffff]
[    0.000000]   node   0: [mem 0x0000000087e00000-0x0000000087ffffff]
[    0.000000]   node   0: [mem 0x0000000088000000-0x000000008fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000008fffffff]
[    0.000000] percpu: Embedded 15 pages/cpu s30860 r8192 d22388 u61440
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line:
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 247180K/262144K available (6208K kernel code, 604K rwdata, 1556K rodata, 1024K init, 237K bss, 14964K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
[    0.000010] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
[    0.000028] Switching to timer-based delay loop, resolution 20ns
[    0.000352] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
[    0.000381] pid_max: default: 32768 minimum: 301
[    0.000577] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.000600] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.001729] CPU: Testing write buffer coherency: ok
[    0.002145] qcom_scm: convention: smc legacy
[    0.003238] Setting up static identity map for 0x80300000 - 0x8030003c
[    0.003429] rcu: Hierarchical SRCU implementation.
[    0.003738] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.004155] smp: Bringing up secondary CPUs ...
[    0.008082] smp: Brought up 1 node, 4 CPUs
[    0.008108] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[    0.008120] CPU: All CPU(s) started in SVC mode.
[    0.013581] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.013760] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.013792] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.014069] pinctrl core: initialized pinctrl subsystem
[    0.016058] NET: Registered protocol family 16
[    0.016417] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.017696] thermal_sys: Registered thermal governor 'step_wise'
[    0.018182] cpuidle: using governor ladder
[    0.018245] cpuidle: using governor menu
[    0.046935] cryptd: max_cpu_qlen set to 1000
[    0.051898] usbcore: registered new interface driver usbfs
[    0.051988] usbcore: registered new interface driver hub
[    0.052057] usbcore: registered new device driver usb
[    0.052114] pps_core: LinuxPPS API ver. 1 registered
[    0.052127] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.052158] PTP clock support registered
[    0.054022] clocksource: Switched to clocksource arch_sys_counter
[    0.055067] NET: Registered protocol family 2
[    0.055342] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.056128] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.056204] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.056250] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.056306] TCP: Hash tables configured (established 2048 bind 2048)
[    0.056448] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.056493] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.056808] NET: Registered protocol family 1
[    0.056863] PCI: CLS 0 bytes, default 64
[    0.059186] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    0.064361] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.064390] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.215072] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
[    0.215102] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
[    0.215909] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[    0.216024] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
[    0.216123] tcsr 1953000.ess_tcsr: setting ess interface select = 0
[    0.216223] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[    0.216573] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.217230] msm_serial 78af000.serial: msm_serial: detected port #0
[    0.217295] msm_serial 78af000.serial: uartclk = 1843200
[    0.217356] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 33, base_baud = 115200) is a MSM
[    0.217388] msm_serial: console setup on port #0
[    0.750852] printk: console [ttyMSM0] enabled
[    0.756069] msm_serial: driver initialized
[    0.765690] loop: module loaded
[    0.766864] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    0.769377] spi-nor spi0.0: mx25l25635e (32768 Kbytes)
[    0.775087] 13 fixed-partitions partitions found on MTD device spi0.0
[    0.779937] OF: Bad cell count for /soc/spi@78b5000/flash@0/partitions
[    0.786459] OF: Bad cell count for /soc/spi@78b5000/flash@0/partitions
[    0.793071] Creating 13 MTD partitions on "spi0.0":
[    0.799369] 0x000000000000-0x000000040000 : "SBL1"
[    0.804758] 0x000000040000-0x000000060000 : "MIBIB"
[    0.809507] 0x000000060000-0x0000000c0000 : "QSEE"
[    0.814385] 0x0000000c0000-0x0000000d0000 : "CDT"
[    0.819125] 0x0000000d0000-0x0000000e0000 : "DDRPARAMS"
[    0.824111] 0x0000000e0000-0x0000000f0000 : "APPSBLENV"
[    0.828975] 0x0000000f0000-0x0000003cc000 : "urlader"
[    0.834199] 0x00000011dc00-0x000000120000 : "urlader_config"
[    0.839392] 0x000000120000-0x0000001a0000 : "tffs1"
[    0.845149] 0x0000001a0000-0x000000220000 : "tffs2"
[    0.849678] 0x000000220000-0x0000002a0000 : "uboot"
[    0.854646] 0x0000002a0000-0x000001f00000 : "firmware"
[    0.859831] 2 fit-fw partitions found on MTD device firmware
[    0.864140] Creating 2 MTD partitions on "firmware":
[    0.869909] 0x000000000000-0x0000002f0000 : "kernel"
[    0.875473] 0x0000002e6350-0x000001c60000 : "rootfs"
[    0.879802] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
[    0.885373] mtd: setting mtd13 (rootfs) as root device
[    0.894137] 1 squashfs-split partitions found on MTD device rootfs
[    0.898906] 0x000001370000-0x000001c60000 : "rootfs_data"
[    0.905650] 0x000001f00000-0x000002000000 : "jffs2"
[    0.924359] gpio-409 (enable USB3 power): hogged as output/high
[    0.953973] ESS reset ok!
[    1.028283] ESS reset ok!
[    1.789057] i2c /dev entries driver
[    1.790720] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 632000 KHz, changing to: 716000 KHz
[    1.791842] sdhci: Secure Digital Host Controller Interface driver
[    1.802219] sdhci: Copyright(c) Pierre Ossman
[    1.808237] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.817218] NET: Registered protocol family 10
[    1.820205] Segment Routing with IPv6
[    1.822715] NET: Registered protocol family 17
[    1.826472] 8021q: 802.1Q VLAN Support v1.8
[    1.830722] Registering SWP/SWPB emulation handler
[    1.857512] VFS: Mounted root (squashfs filesystem) readonly on device 31:13.
[    1.859499] Freeing unused kernel memory: 1024K
[    1.917383] Run /sbin/init as init process
[    3.158239] init: Console is alive
[    3.158631] init: - watchdog -
[    4.715253] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.830540] genirq: irq_chip msmgpio did not update eff. affinity mask of irq 100
[    5.068926] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    5.069000] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    5.073566] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010
[    5.081016] xhci-hcd xhci-hcd.0.auto: irq 102, io mem 0x08a00000
[    5.090516] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    5.096549] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    5.101807] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    5.112632] hub 1-0:1.0: USB hub found
[    5.116072] hub 1-0:1.0: 1 port detected
[    5.120118] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.124389] hub 2-0:1.0: USB hub found
[    5.131869] hub 2-0:1.0: 1 port detected
[    5.135930] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    5.139492] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    5.145044] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000002010010
[    5.152389] xhci-hcd xhci-hcd.1.auto: irq 103, io mem 0x06000000
[    5.161911] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    5.168008] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    5.173248] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    5.182485] hub 3-0:1.0: USB hub found
[    5.187452] hub 3-0:1.0: 1 port detected
[    5.191568] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.195797] hub 4-0:1.0: USB hub found
[    5.203310] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    5.218393] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    5.225317] init: - preinit -
[    6.234077] random: crng init done
[    7.031700] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   11.617996] mount_root: loading kmods from internal overlay
[   11.653056] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[   11.661770] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[   12.724402] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
[   12.724583] jffs2_build_filesystem(): unlocking the mtd device...
[   12.724818] done.
[   12.736883] jffs2_build_filesystem(): erasing all blocks after the end marker...
[   55.221494] done.
[   55.230291] jffs2: notice: (190) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   55.236395] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   55.245882] block: unable to load configuration (fstab: Entry not found)
[   55.252354] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[   55.259444] block: unable to load configuration (fstab: Entry not found)
[   55.265532] block: attempting to load /etc/config/fstab
[   55.276477] block: unable to load configuration (fstab: Entry not found)
[   55.277149] block: no usable configuration
[   55.386998] jffs2: notice: (188) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   56.166597] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   56.166885] block: unable to load configuration (fstab: Entry not found)
[   56.172550] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[   56.179638] block: unable to load configuration (fstab: Entry not found)
[   56.185861] block: attempting to load /etc/config/fstab
[   56.192460] block: unable to load configuration (fstab: Entry not found)
[   56.197429] block: no usable configuration
[   56.206946] mount_root: overlay filesystem has not been fully initialized yet
[   56.212355] mount_root: switching to jffs2 overlay
[   56.228368] overlayfs: upper fs does not support tmpfile.
- config restore -
[   58.126761] urandom-seed: Seed file not found (/etc/urandom.seed)
[   58.426988] procd: - early -
[   58.427512] procd: - watchdog -
[   59.079272] procd: - watchdog -
[   59.079829] procd: - ubus -
[   59.613359] procd: - init -
Please press Enter to activate this console.
[   62.029551] urngd: v1.0.2 started.
[   62.179887] kmodloader: loading kernel modules from /etc/modules.d/*
[   62.190918] tun: Universal TUN/TAP device driver, 1.6
[   62.205687] Loading modules backported from Linux version v5.15.92-0-ge515b9902f5f
[   62.205736] Backport generated by backports.git v5.15.92-1-0-gdfe0f60c
[   62.242790] xt_time: kernel timezone is -0000
[   62.334969] PPP generic driver version 2.4.2
[   62.338064] NET: Registered protocol family 24
[   80.685029] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[   80.685084] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   80.696975] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
[   80.748790] ath10k_ahb a000000.wifi: Loading BDF type 0
[   80.797410] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:16 crc32 e2dfaa91
[   82.085546] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   82.085607] ath10k_ahb a000000.wifi: msdu-desc: 2500  skid: 32
[   82.121171] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[   82.122116] ath10k_ahb a000000.wifi: wmi print 'free: 53252 iram: 13432 sram: 35752'
[   82.250333] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[   84.376321] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[   84.376379] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   84.390227] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
[   84.440026] ath10k_ahb a800000.wifi: Loading BDF type 0
[   84.444242] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 e2dfaa91
[   85.732473] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   85.732536] ath10k_ahb a800000.wifi: msdu-desc: 2500  skid: 32
[   85.768222] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
[   85.769204] ath10k_ahb a800000.wifi: wmi print 'free: 53252 iram: 13432 sram: 35752'
[   85.893187] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[   86.033200] kmodloader: done loading kernel modules from /etc/modules.d/*
[   99.220386] br-lan: port 1(eth0) entered blocking state
[   99.220445] br-lan: port 1(eth0) entered disabled state
[   99.224897] device eth0 entered promiscuous mode
[   99.326156] ess_edma c080000.edma eth1: Link is Down
[  100.234175] br-lan: port 1(eth0) entered blocking state
[  100.234223] br-lan: port 1(eth0) entered forwarding state
[  100.238694] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[  102.475550] ess_edma c080000.edma eth1: Link is Up - 1Gbps/Full - flow control rx/tx
[  102.475654] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready



BusyBox v1.35.0 (2023-04-27 20:28:15 UTC) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 TorRouter 22.03.5, r20134-5f15225c1e
 -----------------------------------------------------
root@OpenWrt:/#
As from build v23.05.0 the new DSA networking is implemented within the 4040 firmware, old configs must be converted manually.
We will start delivering TorRouter on 4040 from v23.05.3

DG.